Molecular-shape recognition of polycyclic aromatic hydrocarbons in reversed phase liquid chromatography

Summary The molecular-shape recognition of polycyclic aromatic hydrocarbons has been studied on various stationary phases in reversed-phase high-performance liquid chromatography. The examined stationary phases were phenyl-, diphenyl-, triphenyl- and benzyl-bonded silicas. The results of regression analysis inidcated that triphenylsilica is the best packing material to recognize the difference in the molecular-shape of structural isomers. This fact was confirmed by the separation of 4-ring isomers.     

Polydimethylsiloxane connection for quartz microchips in a high-pressure system.

An interconnecting technique, the "PDMS connection method", for quartz microchips in a high-pressure system is presented. The connection between quartz microchips is an essential technology for modular microfluidic devices, such as microchip-HPLC. PDMS was applied to the seal material, being spread on the seal side of the chips, and set into the metal housing. The characteristics of the PDMS connection method concerning pressure resistance and the extension of the peak were examined. The experimental results showed a good seal at 5 MPa, which seem to be sufficient for realizing microchip-HPLC utilizing a monolithic silica capillary column as a separation medium. The influence of the extra column effect on chromatographic separation was almost the same as in the case using a commercial union fitting. In addition, the PDMS connection enabled the detachability of chip-based modules with user-friendliness. Our experimental findings suggest that the novel PDMS connection method can possibly be applied as a generic technology in high-pressure microTAS.     

Stereoblock poly(lactic acid): synthesis via solid-state polycondensation of a stereocomplexed mixture of poly(L-lactic acid) and poly(D-lactic acid)

Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.     

Development of miniaturized multi-channel high-performance liquid chromatography for high-throughput analysis

We have developed miniaturized multi-channel high-performance liquid chromatography (HPLC) system. With this system, we can simultaneously separate multiple samples, using a single high-pressure gradient pump, a chip-based sample injection unit, a monolithic silica capillary column array, and a multi-channel UV detection unit based on fiber optics. The injection unit has a simplified structure composed of brass housing and a quartz microchip having microchannels and access ports, which enable a direct injection of sample to multi-channel by commercial multichannel micropipette. Moreover, that possesses a function of microvalve, and on-chip definition of sample injection plugs achieved with a cross channel injection method, providing each column of monolithic silica capillary array. The substances in channels were simultaneously detected with UV having multiple cells. Standard samples were analyzed for characterizing newly developed system, and sharp peaks were obtained with reproducibility data of < 0.9% (R.S.D.). Analysis of tryptic digestion of casein was also employed. These results show that the novel multi-channel HPLC system has the benefits for the high-throughput analysis in the post-genomic analysis/combinatorial chemistry.     

Universal fluorescent labeling of amplification products using locked nucleic acids

Amplification/hybridization‐based genetic analyses using primers containing locked nucleic acids (LNAs) present many benefits. Here, we developed a novel design for universal fluorescent PCR using LNAs. Universal fluorescent PCR generates intermediate nonlabeled fragments and final fluorescent fragments in a two‐step amplification process that uses locus‐specific primers with universal tails and universal fluorescent primers. In this study, a few standard nucleotides were replaced with LNAs only in the fluorescent universal primers. The sequence of the fluorescent universal primer significantly affected the amplification efficiency. For primers with three LNAs, the fluorescent primers with stable M13(‐47) sequences provided the most efficient signal (approximately tenfold higher than the primers with M13(‐21) sequences at lower Tm values). Moreover, AT‐rich LNA substitutions in the fluorescent primers produced much lower amplification efficiencies than GC‐rich substitutions. GC‐rich LNAs produced greater differences in Tm values among primers, and resulted in the preferential production of fluorescently labeled amplicons. The specificity and sensitivity of LNA‐containing fluorescent primers were assessed by genotyping eight STRs in Japanese individuals, and full STR profiles could be generated using as little as 0.25 ng of genomic DNA. The method permitted clear discrimination of alleles and represents sensitive STR genotyping at a reduced cost.     

Massadine,a novel geranylgeranyltransferase type I inhibitor from the marine sponge Stylissa aff. massa

Massadine, a highly oxygenated alkaloid, was isolated from the marine sponge Stylissa aff. massa as an inhibitor of geranylgeranyltransferase type I (GGTase I). The structure of massadine has been deduced from spectral data. Massidine inhibited GGTase I from Candida albicans with an IC(50) value of 3.9 microM. [structure: see text]     

Structure and morphology of the aliphatic polyester poly(δ‐valerolactone) in solution‐grown,chain‐folded lamellar crystals

Poly(δ‐valerolactone) (PVL) crystals in the form of chain‐folded lamellae were prepared by isothermal crystallization from a 2‐methylbutane‐2‐ol solution. Wide‐angle and small‐angle X‐ray diffraction data, obtained from PVL lamellae sedimented to form oriented mats, were supplemented with morphological and structural data from electron microscopy, both imaging and diffraction. The diffraction signals index on an orthorhombic unit cell with the parameters a = 0.747 ± 0.002 nm, b = 0.502 ± 0.002 nm, and c (chain axis) = 0.742 ± 0.002 nm. Similar unit cell parameters were obtained from crystals grown from 1‐octanol and also from drawn melt‐pressed films. The evidence supports a model containing two antiparallel chain segments in the unit cell. The c value of 0.742 nm is appropriate for an all‐trans or onefold helical backbone conformation for the straight stems. Possible slight perturbations at the ester units from the all‐trans backbone conformation are discussed. Computerized modeling was used to optimize the adjacent‐reentry folded structure. The setting angles, with respect to the a axis, are ±58° for the corner and center chains. The lamellae are 7.26 ± 0.05 nm thick, and the chains run orthogonal to the lamellar surface. The chains fold in the diagonal (110) and (11¯0) planes in an alternating fashion. The X‐ray diffraction data suggest that a proportion of adjacent paired antiparallel entities, or hairpin units, are c‐axis‐sheared, and a relationship to the results obtained from drawn films is discussed. A brief comparison is also made with related polymer structures. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2622–2634, 2001