Ultraviolet emission spectra of sunbeds

It is well known that UV radiation contributes to the development of skin cancer. Exposure to solar radiation is predominantly responsible for the high incidence rate of skin cancer, but there are also indications that sunbeds are involved. The aim of the present investigation was to determine the UV emission spectra of sunbeds. It included the most common sunbed models, which cover more than 50% of the Swiss market. The UV emission spectra of sunbeds have special characteristics and are different from the sun spectrum, which can be seen in high-resolution spectral measurements. Sunbed emission spectra are similar to the sun spectrum in the UVB (280-320 nm) range but reach values 10 to 15 times higher in the UVA (320-400 nm) range. An average erythema-effective irradiance of 0.33 W/m2 was determined for sunbeds. This corresponds to a UV index of 13, which is significantly higher than the UV index of 8.5 of the high summer sun at noon at intermediate latitudes. The measurements were spread over the whole effective area of the sunbeds, and an inhomogeneous distribution of the irradiances with variations of up to 30% from the average value was found.     

A DFT study of pyramidalized alkenes: 7-oxasesquinorbornenes and 7,7′-dioxasesquinorbornenes

  DFT calculations of 7′–oxasesquinorbornenes and 7,7′-dioxasesquinorbornenes using the B3LYP/6–31G* method are reported. All the investigated structures (syn- and anti- derivatives) showed significant non-planarity of the central double bond, with the exception of those anti-derivatives possessing symmetrical structures. The influence of the replacement of the methylene groups at position 7- of the norbornene fragment with oxygen and the introduction of second and third (peripheral) double bonds and benzene rings on the molecular and electronic structures of these molecules have also been investigated. Received: 11 November 2002 / Accepted: 6 June 2002 / Published online: 29 April 2003     

Additivity of the proton affinity of polysubstituted benzenes: the ipso position

It is shown, by the MP2(fc)/6-31G^{* *}/ /HF/6-31G^* +ZPE(HF/6-31G^*) theoretical model and concomitant use of homodesmic reactions, that the ipso proton affinities in polyfluorinated benzenes follow a simple additivity rule. Performance of the latter is good, as evidenced by a low average absolute deviation Δ_abs = 0.8 kcal/mol from the accurate ab initio results. Additional evidence supporting the additivity concept is provided by good accordance with the experimental proton affinity (PA) for perfluorobenzene. The present approach enables estimates of the ipso PAs of multiply substituted aromatics. It is particularly useful in those systems which involve or atomic groupings with lone pairs of electrons proximate to the aromatic π moiety. The additivity rule of thumb offers a simple rationalization of the ipso proton affinities. The origin of the PA additivity is briefly discussed.     

Detection of Escherichia coli O157:H7 bacteria by a combination of immunofluorescent staining and capillary electrophoresis

As the number of incidents of bacterial infections continues to rise around the globe, simpler, faster, and more sensitive diagnostic techniques are required to improve the safety of the food supply and to screen for potential bacterial infections in humans. We present here direct and indirect approaches for the detection of bacteria, which are based upon a combination of immunofluorescent staining and capillary electrophoresis. In the direct approach, Escherichia coli O157:H7 bacteria stained with fluorescein-tagged specific antibodies are detected by CE, while in the indirect approach fluorescein-tagged specific antibodies to E. coli are first captured by E. coli O157:H7 bacteria and then released and detected by CE. We have identified suitable bacteria staining and CE protocols, which involved a 10 mM Tris-borate-EDTA (TBE) buffer, 0.25 micro g antibody/1 million bacteria, and capillaries dynamically coated with poly-N-hydroxyethylacrylamide (polyDuramide). We have also successfully detected the presence of E. coli O157:H7 in contaminated meat. The total time required for analysis was 6-8 h, which is less than that realized in most commercial assays presently available.     

Phenethyl Ester of Gallic Acid Ameliorates Experimental Autoimmune Encephalomyelitis

Gallic acid is a phenolic acid present in various plants, nuts, and fruits. It is well known for its anti-oxidative and anti-inflammatory properties. The phenethyl ester of gallic acid (PEGA) was synthesized with the aim of increasing the bioavailability of gallic acid, and thus its pharmacological potential. Here, the effects of PEGA on encephalitogenic cells were examined, and PEGA was found to modulate the inflammatory activities of T cells and macrophages/microglia. Specifically, PEGA reduced the release of interleukin (IL)-17 and interferon (IFN)-γ from T cells, as well as NO, and IL-6 from macrophages/microglia. Importantly, PEGA ameliorated experimental autoimmune encephalomyelitis, an animal model of chronic inflammatory disease of the central nervous system (CNS)—multiple sclerosis. Thus, PEGA is a potent anti-inflammatory compound with a perspective to be further explored in the context of CNS autoimmunity and other chronic inflammatory disorders.     

Influence of structural and interfacial properties of microemulsion eluent on chromatographic separation of simvastatin and its impurities

In order to calculate the structural and compositional characteristics of microemulsions, used as eluents in the investigation of HPLC separation of simvastatin and its six impurities, predictive molecular thermodynamic approach is developed. For calculating fundamental interfacial properties of microemulsions, from pure component properties, the lattice fluid self-consistent field theory (SCF), in conjunction with new classical thermodynamic expressions, was applied. Calculation of predicted radii (PR), area per surfactant (ApS) and film thickness (FT), as well as is interfacial tension and bending moment enabled better understanding of separation of such a complex mixture. The microemulsion, which contained 1% (w/w) of diisopropyl ether, 2% (w/w) of sodium dodecyl sulphate (SDS), 6.6% (w/w) of co-surfactant such as n-butanol and 90.4% (w/w) of aqueous 25 mM disodium phosphate pH 7.0 enabled appropriate chromatographic separation between investigated compounds. It has been proved that this microemulsion had the smallest droplet radii and film thickness, which enabled optimal separation. Also the interfacial tension is the smallest, so the free energy change associated with dispersing the drops favoured a large number of small droplets. Hydrophobic interactions between solutes and stationary phase, as well as the microstructural characteristics of microemulsion eluents had a significant influence on chromatographic behavior of simvastatin and its six impurities.     

Intermolecular interaction in an open-shell pi-bound cationic complex: IR spectrum and coupled cluster calculations for C2H2+-Ar

The intermolecular potential energy surface (PES) of Ar interacting with the acetylene cation in its (2)Pi(u) ground electronic state is characterized by infrared photodissociation (IRPD) spectroscopy and quantum chemical calculations. In agreement with the theoretical predictions, the rovibrational analysis of the IRPD spectrum of C(2)H(2) (+)-Ar recorded in the vicinity of the antisymmetric CH stretching fundamental (nu(3)) is consistent with a vibrationally averaged T-shaped structure and a ground-state center-of-mass separation of R(c.m.) = 2.86 +/- 0.09 A. The nu(3) band experiences a blueshift of 16.7 cm(-1) upon complexation, indicating that vibrational excitation slightly reduces the interaction strength. The two-dimensional intermolecular PES of C(2)H(2) (+)-Ar, obtained from coupled cluster calculations with a large basis set, features strong angular-radial coupling and supports in addition to a global pi-bound minimum also two shallow side wells with linear H-bound geometries. Bound state rovibrational energy level calculations are carried out for rotational angular momentum J = 0-10 (both parities) employing a discrete variable representation-distributed Gaussian basis method. Effective spectroscopic constants are determined for the vibrational ground state by fitting the calculated rotational energies to the standard Watson A-type Hamiltonian for a slightly asymmetric prolate top.     

2-Substituted thiazole-4-carboxamide derivatives as tiazofurin mimics: synthesis and in vitro antitumour activity

Tiazofurin analogues bearing a 5-hydroxymethyl-2-methyl-tetrahydrofuro[2,3-d][1,3]dioxol-6-ol moiety as a sugar mimic (2 and 3), and two novel thiazole-based acyclo-C-nucleosides 4 and 16 have been synthesized in multistep sequences starting from d-xylose (compounds 2 and 3) or from d-arabinose (compounds 4 and 16). All synthesized analogues showed potent in vitro antitumour activities against a panel of human tumour cell lines. Flow cytometry data suggest that cytotoxic effects of analogues 2–4 and 16 in the culture of K562 cells might be mediated by apoptosis. It was also found that these analogues induced changes in cell cycle distribution of K562 cells. Results of western blot analysis (upregulation of Bax and downregulation of Bcl-2, activation of caspase-3 and the presence of a PARP cleavage product) suggest that tiazofurin mimics (2–4 and 16) in K562 cells induced apoptosis in a caspase-dependent way.