Effect of hydrocolloids on starch thermal transitions,as measured by DSC

Differential scanning calorimetry (DSC) was used to analyze the influence of different hydrocolloids (xanthan, guar, and locust bean gums, carboxymethylcellulose and sodium alginate) on the gelatinization of corn starch in systems with starch concentration ranging between 0.1 and 0.7 g starch/g mixture. The reduction of available water produced a shift in gelatinization temperature, especially of the conclusion temperature. The effect was more marked for ionic hydrocolloids. The influence of hydrocolloids on glass transition temperature (T _g) of gelatinized starch suspensions and on the glass transition temperature of the maximally freeze-concentrated solute/unfrozen water matrix (T _g) was also studied.T _g onset values ranged between –4.5 and –5.5C for corn starch pastes with and without hydrocolloids. Those hydrocolloids that increased the viscosity of the unfrozen matrix inhibited additional ice formation during thawing (devitrification).Starch concentration and final heating temperature were found to be relevant factors affecting the kinetics of amylopectin retrogradation during frozen storage at –4C. Xanthan gum failed to prevent amylopectin retrogradation; this observation could be attributed to the fact that gums act outside the starch granule, while amylopectin retrogradation takes place within the granule.     

Optimizing ICA in fMRI using information on spatial regularities of the sources

Spatial independent component analysis (ICA) is a well-established technique for multivariate analysis of functional magnetic resonance imaging (fMRI) data. It blindly extracts spatiotemporal patterns of neural activity from functional measurements by seeking for sources that are maximally independent. Additional information on one or more sources (e.g., spatial regularity) is often available; however, it is not considered while looking for independent components. In the present work, we propose a new ICA algorithm based on the optimization of an objective function that accounts for both independence and other information on the sources or on the mixing model in a very general fashion. In particular, we apply this approach to fMRI data analysis and illustrate, by means of simulations, how inclusion of a spatial regularity term helps to recover the sources more effectively than with conventional ICA. The improvement is especially evident in high noise situations. Furthermore we employ the same approach on data sets from a complex mental imagery experiment, showing that consistency and physiological plausibility of relatively weak components are improved.     

Tunable far infrared generation in hydrogen fluoride

The use of resonantly enhanced stimulated Raman scattering for Q(J) transitions in hydrogen flouride permits a broad coverage of the far infrared spectrum. The tunability was about 5 cm^-1 around several transitions (J = 0 to 5). The output power was measured up to 300 kW corresponding to a photon efficiency of 18%.     

Edge linking and image segmentation by combining optical and digital methods

We present a hybrid method for segmentation of intensity images, which combines an optical contouring technique and digital algorithms for linking edge points or image segmentation. In a first stage, the digital image to be processed is displayed in a twisted-nematic liquid-crystal display (LCD), which is placed between a polarizer–analyzer pair at 45 deg (instead of 90 deg as occurs in standard LCDs). It is not difficult to demonstrate that the proposed setup produces a resultant image with very pronounced dark contours at middle intensity. After the optical preprocessing, two different digital algorithms are applied: an edge linking algorithm (modified chain code) and a simple thresholding technique for image segmentation. The proposed procedure works well with monochromatic and color images. The method could be useful as a robust technique for segmentation of large images in real-time, which presents potential applications in medical and biological imaging.     

FT-EPR and HPLC study of the mechanism of 4-chlorophenol photolysis

The mechanism of 4-chlorophenol (4CP) photolysis was investigated with the aid of Fourier Transform Electron Paramagnetic Resonance (FT-EPR) and pulsed-laser photolysis combined with High Performance Liquid Chromatography (HPLC) detection-of stable (diamagnetic) products. With FT-EPR transient free radicals produced by pulsed-laser excitation of solutions of 4CP in alcohols could be identified. Time profiles of the FT-EPR spectra provided information on reaction kinetics and Chemically Induced Dynamic, Electron Polarization (CIDEP) effects. It was found that 4CP photolysis in alcohols leads to the simultaneous formation of the phenoxyl radical and radicals produced by hydrogen abstraction from the solvent. CIDEP patterns establish that these radicals are formed in a reaction sequence involving a triplet state precursor and radical pair intermediate. Results of earlier transient optical absorption measurements indicate that the triplet precursor must be the carbene 4-oxocyclohexa-2,5-dienylidene. This assignment is supported by the finding that photolysis of quinone diazide in a hydrogen-donating solvent gives the same free radical products as those obtained from 4CP. The formation of the phenoxyl radical intermediate accounts for the finding that photolysis of deoxygenated solutions of 4CP in alcohols gives phenol as stable diamagnetic product. By contrast, photolysis of aerated and deoxygenated aqueous solutions of 4CP produces benzoquinone and hydroquinone as primary products, respectively.     

FexNi100−x nanometric films deposited by laser ablation on SiO2/Si substrates

Fe_xNi_100−x nanometric films were deposited on SiO₂/Si substrates at room temperature using the pulsed laser deposition technique. The targets were Fe-Ni amorphous magnetic foils with composition Fe₅₀Ni₅₀, Fe₃₅Ni₆₅ and Fe₂₂Ni₇₈. Morphological and structural properties of the deposited films were investigated using scanning electron microscopy, Rutherford backscattering spectrometry, grazing incidence X-ray diffraction, and X-ray reflectivity. Electrical and magnetic characteristics of the films were investigated by using the four-point probe and the magneto-optic Kerr effect techniques, respectively. The film properties are strictly dependent on the Fe-Ni compositional ratio.     

Zinc oxide nanostructured layers for gas sensing applications

Various kinds of zinc oxide (ZnO) nanostructures, such as columns, pencils, hexagonal pyramids, hexagonal hierarchical structures, as well as smooth and rough films, were grown by pulsed laser deposition using KrF and ArF excimer lasers, without use of any catalyst. ZnO films were deposited at substrate temperatures from 500 to 700°C and oxygen background pressures of 1, 5, 50, and 100 Pa. Quite different morphologies of the deposited films were observed using scanning electron microscopy when different laser wavelengths (248 or 193 nm) were used to ablate the bulk ZnO target. Photoluminescence studies were performed at different temperatures (down to 7 K). The gas sensing properties of the different nanostructures were tested against low concentrations of NO₂. The variation in the photoluminescence emission of the films when exposed to NO₂ was used as transduction mechanism to reveal the presence of the gas. The nanostructured films with higher surface-to-volume ratio and higher total surface available for gas adsorption presented higher responses, detecting NO₂ concentrations down to 3 ppm at room temperature.     

Processing of W/Si and Si/W bilayers and multilayers with single and multiple excimer-laser pulses

Interdiffusion phenomena, thermal damage and ablation of W/Si and Si/W bilayers and multilayers under XeCl-excimer laser (=308 nm) irradiation at fluences of 0.15, 0.3 and 0.6 J/cm² were studied. Samples were prepared by UHV e-beam evaporation onto oxidized Si. The thickness of W and Si layers and the total thickness of the structures were 1–20 nm and 40–100 nm, respectively. 1 to 300 laser pulses were directed to the same irradiation site. At 0.6 J/cm² the samples were damaged even by a single laser pulse. At 0.3 J/cm² WSi₂ silicide formation, surface roughening and ablation were observed. The threshold for significant changes depends on the number of pulses: it was between 3–10 pulses and 10–30 pulses for bilayers with W and Si surfaces, respectively, and more than 100 pulses for multilayers with the same total thickness of tungsten. At 0.15 J/cm² the periodicity of the multilayers was preserved. Temperature profiles in layered structures were obtained by numerical simulations. The observed differences of the resistance of various bilayers and multilayers against UV irradiation are discussed.