Four-coordinate nickel(II) and copper(II) complexes of 7-amino-4-methyl-5-aza-3-heptene-2-one

Summary The condensation of acetylacetone with ethylenediamine yields 7-amino-4-methyl-5-aza-3-heptene-2-one (AEH). This terdentate (N₂O) Schiff base forms various types of ternary complexes, depending on the nature of the second ligand. Examples of five- and six-coordination have been previously reported. The present paper points to the possibility of preparing a less common type of complex,i.e. [M^II(AE)Py]⁺ (M=Ni or Cu) in which the use of a monodentate ligand (pyridine) favours a square planar geometry.     

Corrosion on prehistoric Cu–Sn-alloys: the influence of artificial environment and storage

The paper contributes to the identification of different corrosion products detected on the cross-section specimens sampled from Bronze Age swords and one helmet found between 60–160 years ago. The objects are kept in 1889 built oak showcases at the Natural History Museum Vienna, having suffered unknown restoration treatments. The identified corrosion products not only affect further eventual treatment in conservation science of copper base objects but also contribute to identify the often unknown find context, which is meant to facilitate archaeological interpretation of the Bronze Age weapons. The analyses of the samples were carried out using SEM-EDXS-EBSD and optical microscopy.     

Sauna,sweat and science II – do we sweat what we drink?

ABSTRACT

Inspired by a previous ‘Sauna, sweat and science’ study [Zech et al. Isot Environ Health Stud. 2015;51(3):439–447] and out of curiosity and enthusiasm for stable isotope and sauna research we aimed at answering the question ‘do we sweat (isotopically) what we drink’? We, therefore, pulse-labelled five test persons in a sauna experiment with beverages that were ²H-enriched at about +25,600?‰. Sweat samples were collected during six sauna rounds and the hydrogen isotope composition δ²H_sweat was determined using an isotope ratio mass spectrometer. Before pulse labelling, δ²H_sweat – reflecting by approximation body water – ranged from –32 to –22?‰. This is ～35?‰ enriched compared to usual mid-European drinking water and can be explained with hydrogen-bearing food as well as with the respiratory loss of ²H-depleted vapour. The absence of a clearly detectable ²H pulse in sweat after pulse labelling and δ²H_sweat results of ≤+250?‰ due to a fast ²H equilibration with body water are moreover a clearly negative answer to our research question also in a short-term consideration. Given that the recovery of the tracer based on an isotope mass balance calculation is clearly below 100?%, we finally answer the question ‘where did the rest of the tracer go?’     

Benchmark values for the Soret,thermal diffusion and diffusion coefficients of three binary organic liquid mixtures

With the aim of providing reliable benchmark values, we have measured the Soret, diffusion and thermal diffusion coefficients of the three binary mixtures of dodecane, isobutylbenzene and 1,2,3,4 tetrahydronaphthalene for a concentration of 50 wt% at a temperature of 25C. The experimental techniques applied by the five participating laboratories are transient holographic gratings, annular and parallelepipedic thermogravitational columns, and vertical parallelepipedic columns with velocity amplitude determination by laser doppler velocimetry. The systems have also been studied in a annular thermogravitational column filled with a porous medium in the gap. There is a good agreement between the different experiments with deviations of the order of a few per cent in most cases (8.5% at most). The numerical values are tabulated in the paper.     

Generation and characterization of stable, highly concentrated titanium dioxide nanoparticle aerosols for rodent inhalation studies

The intensive use of nano-sized titanium dioxide (TiO₂) particles in many different applications necessitates studies on their risk assessment as there are still open questions on their safe handling and utilization. For reliable risk assessment, the interaction of TiO₂ nanoparticles (NP) with biological systems ideally needs to be investigated using physico-chemically uniform and well-characterized NP. In this article, we describe the reproducible production of TiO₂ NP aerosols using spark ignition technology. Because currently no data are available on inhaled NP in the 10?C50 nm diameter range, the emphasis was to generate NP as small as 20 nm for inhalation studies in rodents. For anticipated in vivo dosimetry analyses, TiO₂ NP were radiolabeled with ⁴⁸V by proton irradiation of the titanium electrodes of the spark generator. The dissolution rate of the ⁴⁸V label was about 1% within the first day. The highly concentrated, polydisperse TiO₂ NP aerosol (3?C6 × 10⁶ cm^?3) proved to be constant over several hours in terms of its count median mobility diameter, its geometric standard deviation, and number concentration. Extensive characterization of NP chemical composition, physical structure, morphology, and specific surface area was performed. The originally generated amorphous TiO₂ NP were converted into crystalline anatase TiO₂ NP by thermal annealing at 950 °C. Both crystalline and amorphous 20-nm TiO₂ NP were chain agglomerated/aggregated, consisting of primary particles in the range of 5 nm. Disintegration of the deposited TiO₂ NP in lung tissue was not detectable within 24 h.     

Einen Nachweis der Tabakfeuchthaltemittel Tri- und Poly?thylenglykol

Ohne Zusammenfassung     

Die optisch aktive L (+)-Milchs?ure in Milch und Molkereiprodukten

Ohne Zusammenfassung     

Fiber crystal growth from the melt for non-linear optical applications

During several years, we have been involved in the growth and characterization of non-linear optical crystals by the two most common techniques for growing single-crystal fibers from the melt: laser-heated pedestal growth and micro-pulling down. Their specific features are presented in this study and their versatility is demonstrated through two typical examples of incongruently melting materials: K₃Li_2?xNb_5+xO_15+2x (solid solution of the ternary system K₂O–Li₂O–Nb₂O₅) and Ca₅(BO₃)₃F which can only be grown from a flux.     

Monitoring of NO2 in the ambient air with passive samplers before and after a road reconstruction event

Nitrogen dioxide (NO₂) concentrations were used to evaluate the air quality before and after the infrastructural change of an important traffic artery in Mortsel, Antwerp (Belgium). During the reconstruction works two pairs of traffic lanes were reduced to one in each direction. Two sampling campaigns were conducted: the first one before the works in 2003 and the second one in 2005, after the road works were finished. Sampling was performed on a weekly base with the use of passive diffusion tubes on the streets, and also indoors in nearby houses. The samples were analyzed by ion chromatography, from which data the NO₂ concentrations in air could be calculated. These results were compared with NO₂ values from the air monitoring station 42R801 of the Flemish Environment Agency in Borgerhout, Antwerp. On the base of different NO₂ concentrations, correlated well with the traffic density, sampling locations were classified into three groups as follows: 1) ‘heavily polluted’ (heavy traffic); 2) ‘moderately polluted’ (medium traffic); or 3) ‘less polluted’ (low traffic density). Sampling sites located further from the road works, enclosed to the group ‘less polluted’, showed the lowest NO₂ concentrations. The highest NO₂ level was found for the locations close to reconstruction works, which belonged to the group ‘heavily polluted’. The contribution of NO₂ was at the same level before and after the road works. During the first campaign it ranged from 30 ± 7 µg/m³ to 71 ± 11 µg/m³ and during the second sampling it was between 36 ± 17 µg/m³ and 73 ± 17 µg/m³. These modernization works had no impact on preventing the traffic-related pollutant as NO₂ and as a consequence no significant effect on the air quality in the studied region. It has been proven that the impact of traffic on the air quality is unmistakably high and simply reduction of the number of the traffic lanes, intended to discourage the traffic flow, had apparently no environmentally advantageous effect.     

Unprecedented (Cu2Ln)n complexes (Ln = Gd3+, Tb3+): a new "single chain magnet"

The magnetic study of a trinuclear Cu-Gd-Cu complex confirms that such basic units self-assemble to yield a high spin species. A nice fit of the magnetic data is obtained for an infinite chain of tetranuclear Gd(2)Cu(2) motifs linked through the Gd ions located at the opposite vertexes of the tetranuclear motifs according to two Cu-Gd coordination modes, a double bridging through phenoxo and alkoxo oxygen atoms and a single bridging through deprotonated amide functions. The two interaction pathways are ferromagnetic. Alternating current susceptibility measurements confirm that the equivalent copper-terbium entity is a single chain magnet with a barrier height for reversal of the magnetization equal to 28.5 K.