Synthesis of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) by the competitive single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization in water

The synthesis of a block copolymer poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) is reported. This new material was synthesized by single‐electron‐transfer/degenerative‐chain‐transfer‐mediated living radical polymerization (SET‐DTLRP) in two steps. First, a bifunctional macroinitiator of α,ω‐di(iodo)poly (butyl acrylate) [α,ω‐di(iodo)PBA] was synthesized by SET‐DTLRP in water at 25 °C. The macroinitiator was further reinitiated by SET‐DTLRP, leading to the formation of the desired product. This ABA block copolymer was synthesized with high initiator efficiency. The kinetics of the copolymerization reaction was studied for two PBA macroinitiators with number–average molecular weight of 10 k and 20 k. The relationship between the conversion and the number–average molecular weight was found to be linear. The dynamic mechanical thermal analysis suggests just one phase, indicating that copolymer behaves as a single material with no phase separation. This methodology provides the access to several block copolymers and other complex architectures that result from combinations of thermoplastics (PVC) and elastomers (PBA). From industrial standpoint, this process is attractive, because of easy experimental setup and the environmental friendly reaction medium. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3001–3008, 2006     

Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

Polycondensation of mono- and difunctional derivatives of p-xylene

A new method for the production of polydimethylbenzylenes,$ \rlap{--} [{\rm C}_6 {\rm H}_4 ({\rm CH})_2 {\rm CH}_{\rm 2} \rlap{--} ]_n $, involves the polycondensation of the mono- and dichloromethyl and mono- and diacetoxymethyl derivatives of p-xylene via an acid-catalyzed reaction in anhydrous acetic acid. The reaction of the difunctional derivatives is slower than the reaction of the monofunctional ones, leading to linear, predominantly crystalline, high-melting polymers with molecular weights of 2000–3000. Polycondensation of both monomers under different feed ratios leads to polymers with the same structure, and the monofunctional monomers condense with themselves more favorably than with the difunctional ones. Thus a head-to-head structure is preferred, and crystalline polymers of high structural purity are obtained.     

Evaluation of the Use of Elicitors for the Production of Antioxidant Compounds in Liquid Cultures of Ganoderma curtisii from Costa Rica

The use of substances or conditions as elicitors can significantly increase the production of secondary metabolites. In this research, the effects of different elicitors on the production of antioxidant secondary metabolites were evaluated in a strain of Ganoderma sp. The elicitors tested were pH changes in different growth phases of the fungus (pH 3, 5.5 and 8), different concentrations of peptone as a nitrogen source (1 g/L and 10 g/L), and the addition of chemical agents to the culture medium (ethanol, growth regulators, and salts). The alkaline pH during the stationary phase and the high availability of nitrogen were effective elicitors, producing cultures with higher antioxidant activity (37.87 g/L and 43.13 g/L dry biomass) although there were no significant differences with other treatments.     

Novel α-Aminophosphonates and α-Aminophosphonic Acids: Synthesis,Molecular Docking and Evaluation of Antifungal Activity against Scedosporium Species

The Scedosporium genus is an emerging pathogen with worldwide prevalence and high mortality rates that gives multidrug resistance to antifungals; therefore, pharmacological alternatives must be sought for the treatment of diseases caused by this fungus. In the present project, six new α-aminophosphates were synthesized by the Kabachnik–Fields multicomponent reaction by vortex agitation, and six new monohydrolyzed α-aminophosphonic acids were synthesized by an alkaline hydrolysis reaction. Antifungal activity was evaluated using the agar diffusion method as an initial screening to determine the most active compound compared to voriconazole; then it was evaluated against 23 strains of the genus Scedosporium following the M38-A2 protocol from CLSI (activity range: 648.76–700 µg/mL). Results showed that compound 5f exhibited the highest antifungal activity according to the agar diffusion method (≤1 mg/mL). Cytotoxicity against healthy COS-7 cells was also evaluated by the MTT assay and it was shown that compound 5f exhibits a lower toxicity in comparison to voriconazole at the same concentration (1000 µM). A docking study was conducted afterwards, showing that the possible mechanism of action of the compound is through the inhibition of allosteric 14-α-demethylase. Taking these results as a basis, 5f is presented as a compound with attractive properties for further studies.     

Density Functional Theory Study of Hypoxanthine Tautomerism in Both the Isolated State and a Modeled-Ideal Aqueous Solution at Several Heterocyclic Protonation Levels

In order to advance the knowledge of prototropic tautomerism from the physicochemical point of view, the purine derivative hypoxanthine has been selected and studied. The overall purpose has been to explore thermodynamic aspects of the heterocycle tautomerism under the influence of both its protonation level and the surrounding dielectric constant. A Density Functional Theory study (at the B3LYP/6-31++G** level) was performed, in which the energetic and thermodynamic stabilities, the electric dipole moment values, the tautomeric equilibrium constants and the tautomeric populations were obtained for several hypoxanthine tautomers under systematically modified heterocyclic protonation levels, considering both isolated and ideal aqueous solution states. Among the interesting results obtained are changes in the tautomeric populations for several heterocyclic protonation states and with the increase of the dielectric constant. Several of the predictions made for an aqueous solution show good agreement with recently reported experimental conclusions. Also, the ionizable groups that contribute to the different hypoxanthine ionization steps in the main tautomers have been established. These and other related results are presented and discussed. Finally, the confidence developed in the predicted tautomeric populations in a modeled-ideal aqueous solution allows us to propose that the methodology applied here can be used for the study of prototropic tautomerism in heterocycles belonging to this class, particularly when the experimental work is challenging in both performance and physicochemical data analysis.     

Structure of neutron stars in R-squared gravity

The effects implied for the structure of compact objects by the modification of General Relativity (GR) produced by the generalization of the Lagrangian density to the form $f(R)=R+\alpha R^2$ , where $R$ is the Ricci curvature scalar, have been recently explored. It seems likely that this squared-gravity may allow heavier Neutron Stars (NSs) than GR. In addition, these objects can be useful to constrain free parameters of modified-gravity theories. The differences between alternative gravity theories are enhanced in the strong gravitational regime. In this regime, because of the complexity of the field equations, perturbative methods become a good choice to treat the problem. Following previous works in the field, we performed a numerical integration of the structure equations that describe NSs in $f(R)$ -gravity, recovering their mass-radius relations, but focusing on particular features that arise from this approach in the profiles of the NS interior. We show that these profiles run in correlation with the second-order derivative of the analytic approximation to the Equation of State (EoS), which leads to regions where the enclosed mass decreases with the radius in a counter-intuitive way. We reproduce all computations with a simple polytropic EoS to separate zeroth-order modified gravity effects.     

Impact of silica environment on hyperfine interactions in 𝜖-Fe2O3 nanoparticles

Magnetic nanoparticles have found broad applications in medicine, especially for cell targeting and transport, and as contrast agents in MRI. Our samples of ??-Fe₂O₃ nanoparticles were prepared by annealing in silica matrix, which was leached off and the bare particles were then coated with amorphous silica layers of various thicknesses. The distribution of particle sizes was determined from the TEM pictures giving the average size ～20 nm and the thickness of silica coating ～5; 8; 12; 19 nm. The particles were further characterized by the XRPD and DC magnetic measurements. The nanoparticles consisted mainly of ??-Fe₂O₃ with admixtures of ～1 % of the α phase and less than 1 % of the γ phase. The hysteresis loops displayed coercivities of ～2 T at room temperature. The parameters of hyperfine interactions were derived from transmission Mössbauer spectra. Observed differences of hyperfine fields for nanoparticles in the matrix and the bare ones are ascribed to strains produced during cooling of the composite. This interpretation is supported by slight changes of their lattice parameters and increase of the elementary cell volume deduced from XRD. The temperature dependence of the magnetization indicated a two-step magnetic transition of the ??-Fe₂O₃ nanoparticles spread between ～85 K and ～150 K, which is slightly modified by remanent tensile stresses in the case of nanoparticles in the matrix. The subsequent coating of the bare particles by silica produced no further change in hyperfine parameters, which indicates that this procedure does not modify magnetic properties of nanoparticles.