Polymerization of cyclopentadiene initiated by methylaluminoxane

The polymerization of cyclopentadiene (CPD) was effectively initiated by methylaluminoxane (MAO) to generate poly(cyclopentadiene) (polyCPD). The effects on the polymerization of some reaction parameters such as the monomer concentration, the initiator concentration, and solvents were investigated. The conversion of CPD was monitored with gas chromatography to investigate the reaction kinetics. The polymerization rate was proportional to the concentrations of MAO in the first order and of the CPD monomer in the second order, and a reasonable cationic polymerization mechanism was suggested on the basis of the kinetic study. PolyCPD obtained at a low temperature could be dissolved in toluene or chloroform, and this indicated lower cross‐coupling during the polymerization reaction. ¹H NMR and IR analysis of the polymer indicated that there were almost equal amounts of 1,2‐enchainment and 1,4‐enchainment in the polymer chain. The measurement of polyCPD showed its unique properties as a potential candidate for stable wrappings or electronic packaging materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 264–272, 2006     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

Adsorption of 1,10-phenanthroline within a dodecanethiol monolayer: an approach to a switchable electrode surface

A simple method was used to prepare a "switchable" electrode surface by using self-assembled monolayers of dodecanethiol on a gold electrode. The dodecane-modified electrode was electrochemically inactive until the monolayer was soaked in solutions of 1,10-phenanthroline or 2,2'-bipyridine. The electroactive form of the electrode could be reverted back to the nonelectroactive form by rinsing the electrode. Surface IR results showed that both dodecanethiol and 1,10-phenanthroline exist in the mixed monolayer.     

Quantum-Inspired Complex-Valued Language Models for Aspect-Based Sentiment Classification

Aiming at classifying the polarities over aspects, aspect-based sentiment analysis (ABSA) is a fine-grained task of sentiment analysis. The vector representations of current models are generally constrained to real values. Based on mathematical formulations of quantum theory, quantum language models have drawn increasing attention. Words in such models can be projected as physical particles in quantum systems, and naturally represented by representation-rich complex-valued vectors in a Hilbert Space, rather than real-valued ones. In this paper, the Hilbert Space representation for ABSA models is investigated and the complexification of three strong real-valued baselines are constructed. Experimental results demonstrate the effectiveness of complexification and the outperformance of our complex-valued models, illustrating that the complex-valued embedding can carry additional information beyond the real embedding. Especially, a complex-valued RoBERTa model outperforms or approaches the previous state-of-the-art on three standard benchmarking datasets.     

Insights into the Allosteric Effect of SENP1 Q597A Mutation on the Hydrolytic Reaction of SUMO1 via an Integrated Computational Study

Small ubiquitin-related modifier (SUMO)-specific protease 1 (SENP1) is a cysteine protease that catalyzes the cleavage of the C-terminus of SUMO1 for the processing of SUMO precursors and deSUMOylation of target proteins. SENP1 is considered to be a promising target for the treatment of hepatocellular carcinoma (HCC) and prostate cancer. SENP1 Gln597 is located at the unstructured loop connecting the helices α4 to α5. The Q597A mutation of SENP1 allosterically disrupts the hydrolytic reaction of SUMO1 through an unknown mechanism. Here, extensive multiple replicates of microsecond molecular dynamics (MD) simulations, coupled with principal component analysis, dynamic cross-correlation analysis, community network analysis, and binding free energy calculations, were performed to elucidate the detailed mechanism. Our MD simulations showed that the Q597A mutation induced marked dynamic conformational changes in SENP1, especially in the unstructured loop connecting the helices α4 to α5 which the mutation site occupies. Moreover, the Q597A mutation caused conformational changes to catalytic Cys603 and His533 at the active site, which might impair the catalytic activity of SENP1 in processing SUMO1. Moreover, binding free energy calculations revealed that the Q597A mutation had a minor effect on the binding affinity of SUMO1 to SENP1. Together, these results may broaden our understanding of the allosteric modulation of the SENP1−SUMO1 complex.     

Determination of 241Am in Environmental Samples: A Review

The determination of ²⁴¹Am in the environment is of importance in monitoring its release and assessing its environmental impact and radiological risk. This paper aims to give an overview about the recent developments and the state-of-art analytical methods for ²⁴¹Am determination in environmental samples. Thorough discussions are given in this paper covering a wide range of aspects, including sample pre-treatment and pre-concentration methods, chemical separation techniques, source preparation, radiometric and mass spectrometric measurement techniques, speciation analyses, and tracer applications. The paper focuses on some hyphenated separation methods based on different chromatographic resins, which have been developed to achieve high analytical efficiency and sample throughput for the determination of ²⁴¹Am. The performances of different radiometric and mass spectrometric measurement techniques for ²⁴¹Am are evaluated and compared. Tracer applications of ²⁴¹Am in the environment, including speciation analyses of ²⁴¹Am, and applications in nuclear forensics are also discussed.     

Dynamic Variation of Amino Acid Contents and Identification of Sterols in Xinyang Mao Jian Green Tea

As important biomolecules in Camellia sinensis L., amino acids (AAs) are considered to contribute to the overall green tea sensory quality and undergo dynamic changes during growth. However, limited by analytical capacity, detailed AAs composition in different growth stages remains unclear. To address this question, we analyzed the dynamic changes of 23 AAs during leaf growth in Xinyang Mao Jian (XYMJ) green tea. Using amino acid analyzer, we demonstrated that most AAs are abundant on Pure Brightness Day and Grain Rain Day. After Grain Rain, 23 AAs decreased significantly. Further analysis shows that theanine has a high level on the day before Spring Equinox and Grain Rain, accounting for 44–61% of the total free AAs content in tea leaves. Glu, Pro, and Asp are the second most abundant AAs. Additionally, spinasterol and 22,23-dihydrospinasterol are first purified and identified in ethanol extract of XYMJ by silica gel column chromatography method. This study reveals the relationship between plucking days and the dynamic changes of AAs during the growth stage and proves the rationality of the traditional plucking days of XYMJ green tea.     

High-performance potassium poly(heptazine imide) films for photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting is an appealing approach by which to convert solar energy into hydrogen fuel. Polymeric semiconductors have recently attracted intense interest of many scientists for PEC water splitting. The crystallinity of polymer films is regarded as the main factor that determines the conversion efficiency. Herein, potassium poly(heptazine) imide (K-PHI) films with improved crystallinity were in situ prepared on a conductive substrate as a photoanode for solar-driven water splitting. A remarkable photocurrent density of ca. 0.80 mA cm⁻² was achieved under air mass 1.5 global illumination without the use of any sacrificial agent, a performance that is ca. 20 times higher than that of the photoanode in an amorphous state, and higher than those of other related polymeric photoanodes. The boosted performance can be attributed to improved charge transfer, which has been investigated using steady state and operando approaches. This work elucidates the pivotal importance of the crystallinity of conjugated polymer semiconductors for PEC water splitting and other advanced photocatalytic applications.

Potassium poly(heptazine imide) photoanode is synthesized, and owing to the improved crystallinity, it has presented a remarkable performance for solar-driven water splitting.     

Seasonal variation of 129I species in the Baltic Proper

Iodine speciation plays a significant role in iodine volatilizing into atmosphere from the seas, as well as serving as a biological indicator. Despite this importance, the data on iodine species revealed inconclusive evidence of what factors controlling speciation transformation. We here present new data on profiles of ¹²⁹I speciation in the Baltic Proper during November 2009. Along with the two earlier investigations (August 2006 and April 2007), an assessment of seasonal variation of ¹²⁹I species is presented. The results show that, due to the anoxic nature of Baltic Proper, presence of ¹²⁹IO₃ ^? in the Baltic Proper does not follow an obvious seasonal cycle, as the case with ¹²⁹I^?. Concentrations of ¹²⁹I^? in the Baltic Proper exhibit higher values in summer than the other two seasons (spring and winter), which might be associated with degrading of organic matter and release from sediment to water column that is more pronounced during summer. ¹²⁹I^? in surface water from the three seasons does not reflect the release function from the reprocessing facilities during the period April 2007 to November 2009. Consequently variability of ¹²⁹I^? in surface seawater of the Baltic Proper depends, to some extent, on local physical as well as biochemical conditions.