Spin-label saturation-recovery EPR at W-band: applications to eye lens lipid membranes

Saturation-recovery (SR) EPR at W-band (94 GHz) to obtain profiles of the membrane fluidity and profiles of the oxygen transport parameter is demonstrated for lens lipid membranes using phosphatidylcholine (n-PC), stearic acid (n-SASL), and cholesterol analog (ASL and CSL) spin labels, and compared with results obtained in parallel experiments at X-band (9.4 GHz). Membranes were derived from the total lipids extracted from 2-year-old porcine lens cortex and nucleus. Two findings are especially significant. First, measurements of the spin-lattice relaxation times T1 for n-PCs allowed T1 profiles across the membrane to be obtained. These profiles reflect local membrane properties differently than profiles of the order parameter. Profiles obtained at W-band are, however, shifted to longer T1 values compared to those obtained at X-band. Second, using cholesterol analog spin labels and relaxation agents (hydrophobic oxygen and water-soluble NiEDDA), the cholesterol bilayer domain was discriminated in membranes made from lipids of the lens nucleus. However, membranes made from cortical lipids show a single homogeneous environment. Profiles of the oxygen transport parameter obtained from W-band measurements are practically identical to those obtained from X-band measurements, and are very similar to those obtained earlier at X-band for membranes made of 2-year-old bovine cortical and nuclear lens lipids (M. Raguz, J. Widomska, J. Dillon, E.R. Gaillard, W.K. Subczynski, Biochim. Biophys. Acta 1788 (2009) 2380-2388). Results demonstrate that SR EPR at W-band has the potential to be a powerful tool for studying samples of small volume, ～30 nL, compared with the sample volume of ～3 μL at X-band.     

Comparison of Spectroscopic and Lasing Properties of Different Types of Sol-Gel Glass Matrices Containing Rh-6G

Rhodamine-6G (Rh-6G) is embedded in sol-gel glass samples which have been prepared by three different methods namely: 1) using HCl as catalyst and glycerol as Drying Control Chemical Additive (DCCA), 2) using HCl as catalyst at 60 °C and drying at room temperature and 3) using HCl as catalyst at 60 °C and heated at 600 °C for 3 h. Comparative studies of spectroscopic and lasing properties of the three types of Rh-6G containing samples were carried out with the lapse of time upto 8 months. Photostability of Rh-6G containing sol-gel samples is measured in terms of half life under Nitrogen laser pumping as number of pulses of N₂ laser necessary to reduce the dye laser intensity to 50% of the original value and value is 7500 pulses at 1.67 Hz rate. The best performance of Rh-6G, as far as its spectroscopic and lasing properties are concerned was found in third type of host matrices using HCl as catalyst at 60 °C and heated at 600 °C for 3 h.     

Semi-wet growth and characterization of multi-functional nano-engineered mixed metal oxides for industrial application

This review paper covers the low temperature wet growth of nano-engineered particles of ZnO-based mixed metal oxides, their growth mechanism, and characterization using X-ray diffraction, SEM, TEM and IR, UV–visible, and XPS spectral techniques. Main focus of this article is centered on low temperature semi-wet methods of synthesis that are suitable for large scale production of zinc oxide-based systems mixed with iron oxide, copper oxide, nickel oxide and cobalt oxide. These mixed metal oxides have broad industrial applications as catalyst, semiconductors, adsorbents, superconductors, electro-ceramics, and antifungal agents in addition to extensive applications in medicines. This paper discusses the low-cost and environment friendly synthesis of these mixed metal oxides, measurement of properties and applicability of these materials systems.     

Dielectric and ac impedance studies of nanostructured CaCu3Ti3.90Ce0.10O12 electro-ceramic synthesized by citrate-gel route

Effect of doping at Ti⁴⁺ site by Ce³⁺ has been examined in CaCu₃Ti_3.90Ce_0.10O₁₂ synthesized by citrate-gel route. DTA/TG analysis of dry powder gives pre-information about formation of final product around 850 °C. X ray diffraction analysis confirmed the formation of CaCu₃Ti_3.90Ce_0.10O₁₂ phase of the ceramic sintered at 950 °C for 12 h. Microstructure has been studied using scanning electron microscopy and confirmed the average grain size found in nano range 200–400 nm in system CaCu₃Ti_3.90Ce_0.10O₁₂.The nature of relaxation behavior of ceramic was also rationalized by using the impedance and modulus spectroscopy. The bulk conductivity indicates an Arrhenius-type thermally activated process. The ac conductivity spectrum obeyed the Jonscher power law. The complex impedance diagrams of the ceramic exhibited a significant contribution from the grains, grain boundaries and electrode. The activation energies calculated from the grain-boundary relaxation time constant was found to be 0.49 eV which confirmed the Maxwell–Wagner type of relaxation present in the ceramic.     

Development and validation of a dried blood spot–HPLC assay for the determination of metronidazole in neonatal whole blood samples

A selective and sensitive high-performance liquid chromatography method with UV detection for the determination of metronidazole in dried blood spots (DBS) has been developed and validated. DBS samples [spiked or patient samples] were prepared by applying blood (30 µL) to Guthrie cards. Discs (6 mm diameter) were punched from the cards and extracted using water containing the internal standard, tinidazole. The extracted sample was chromatographed without further treatment using a reversed phase system involving a Symmetry® C18 (5 µm, 3.9?×?150 mm) preceded by a Symmetry® guard column of matching chemistry and a detection wavelength of 317 nm. The mobile phase comprised acetonitrile/0.01?M phosphate solution (KH₂PO₄), pH 4.7, 15:85, v/v, with a flow rate of 1 mL/min. The calibration was linear over the range 2.5–50 mg/mL. The limits of detection and quantification were 0.6 and 1.8 µg/mL, respectively. The method has been applied to the determination of 203 DBS samples from neonatal patients for a phamacokinetic/pharmacodynamic study.     

Impact of APCI ionization source in liquid chromatography tandem mass spectrometry based tissue distribution studies

Measurement of test article concentration in tissue samples has been an important part of pharmacokinetic study and has helped to co‐relate pharmacokinetic/pharmacodynamic relationships since the 1950s. Bioanalysis of tissue samples using LC–MS/MS comes with unique challenges in terms of sample handling and inconsistent analyte response owing to nonvolatile matrix components. Matrix effect is a phenomenon where the target analyte response is either suppressed or enhanced in the presence of matrix components. Based on previous reports electrospray ionization (ESI) mode of ionization is believed to be more affected by matrix components than atmospheric pressure chemical ionization (APCI) or atmospheric pressure photoionization. To explore the impact of ionization source with respect to bioanalysis of tissue samples, five structurally diverse compounds – atenolol, verapamil, diclofenac, propranolol and flufenamic acid – were selected. Quality control standards were spiked into 10 different biological matrices like whole blood, liver, heart, brain, spleen, kidney, skeletal muscle, eye and skin tissue and were quantified against calibration standards prepared in rat plasma. Quantitative bioanalysis was performed utilizing both APCI and ESI mode and results were compared. Quality control standards when analyzed with APCI mode were found to be more consistent in terms of accuracy and precision as compared with ESI mode. Additionally, for some instances, up to 20‐fold broader dynamic linearity range was observed with APCI mode as compared with ESI mode. As phospholid interferences have poor response in APCI mode, protein precipitation extraction technique can be used for multimatrix quantitation, which is more amenable to automation. The approach of multiple biological matrix quantitation against a single calibration curve helps bioanalysts to reduce turnaround time. Copyright © 2016 John Wiley & Sons, Ltd.     

Probing Absolute Electronic Energy Levels in Hg‐Doped CdTe Semiconductor Nanocrystals by Electrochemistry and Density Functional Theory

The absolute electronic energy levels in Hg‐doped CdTe semiconductor nanocrystals (CdHgTe NCs) with varying sizes/volumes and Hg contents are determined by using cyclic voltammetry (CV) measurements and density functional theory (DFT) ‐based calculations. The electrochemical measurements demonstrate several distinct characteristic features in the form of oxidation and reduction peaks in the voltammograms, where the peak positions are dependent on the volume of CdHgTe NCs as well as on their composition. The estimated absolute electronic energy levels for three different volumes, namely 22, 119 and 187 nm³ with 2.7±0.3 % of Hg content, show strong volume dependence. The volume‐dependent shift in the characteristic reduction and oxidation peak potential scan can be attributed to the alteration in the energetic band positions owing to the quantum confinement effect. Moreover, the composition (Cd/Hg=98.3/1.7 and 97.0/3.0) ‐dependent alteration in the electronic energy levels of CdHgTe NCs for two different samples with similar volumes (ca. 124±5 nm³) are shown. Thus obtained electronic energy level values of CdHgTe NCs as a function of volume and composition demonstrate good congruence with the corresponding absorption and emission spectral data, as well as with DFT‐based calculations. DFT calculations reveal that incorporation of Hg into CdTe NCs mostly affects the energy levels of conduction band edge, whereas the valence band edge remains almost unaltered.     

Flexible cofacial binuclear metal complexes derived from alpha,alpha-bis(salicylimino)-m-xylene

The tetradentate Schiff-base ligand SIXH2 (alpha,alpha-bis(salicylimino)-m-xylene), prepared from salicylaldehyde and m-xylylenediamine, forms cofacial binuclear complexes with Pd and Cu. Of the two isomers possible (trans-syn and trans-anti) for M2(SIX)2, these complexes crystallize exclusively as the trans-anti isomer. In ansolvous Pd2(SIX)2, the metal-containing planes are approximately parallel, with PdPd 4.416(1) A. Pd2(SIX)2 also forms a crystalline solvate, in which the molecules adopt a more open conformation with longer metal-metal distances (5.109(1) and 5.112(1) A). The M...M distance is significantly longer in Cu2(SIX)2 (6.653(1) A), because of conformational changes in the m-xylylene moieties and substantial tetrahedral distortion about Cu.     

One-pot synthesis and in vivo biological evaluation of new pyrimidine privileged scaffolds as potent anti-inflammatory agents

Research on Chemical Intermediates - A simple methodology has been developed for the synthesis of diverse members of multifunctionalized 4-hydroxy-2-methyl-6-(phenyl)pyrimidine-5-carbonitrile...