p+209Bi核反应微观数据的理论计算

利用光学模型、激光模型、蒸发模型及扭曲波玻恩近似理论,对入射能量从阈能到300MeV,p+²⁰⁹Bi的中子反应截面、剩余核截面、出射粒子的多重数进行了理论计算及分析,并将计算结果与实验数据进行了比较.同时得到一组能量到50?0MeV与实验数据符合很好的光学势参数.     

High performance 1689-nm quantum well diode lasers

1689-nm diode lasers used in medical apparatus have been fabricated and characterized. The lasers had pnpn InP current confinement structure, and the active region consisted of 5 pairs of InGaAs quantum wells and InGaAsP barriers.     

塑料闪烁体的辐照特性

利用⁶⁰Co放射源分别对3种塑料闪烁体(BC-408, EJ-200, BC-404)进行辐照损伤研究, 比较辐照前后的透射谱、发射谱及光产额的变化, 发现3种闪烁体在低剂量具有较好的抗辐照性能; 当照射剂量超过1.44×10⁴Gy时,透射谱明显变坏, 光输出减少很严重, 但发射谱却保持不变.     

High temperature superconducting thin films for microwave filters

YBa₂Cu₃O_7-δ and Tl₂Ba₂CaCu₂O₈ thin films for microwave filters were synthesized by pulsed laser deposition and the two-step thalliation process. Substrate quality requirements and the relation of thin film morphology, microstructure with microwave surface resistance were discussed.     

Synthesis for robust synchronization of chaotic systems under output feedback control with multiple random delays

Synchronization under output feedback control with multiple random time delays is studied, using the paradigm in nonlinear physics—Chua’s circuit. Compared with other synchronization control methods, output feedback control with multiple random delay is superior for a realistic synchronization application to secure communications. Sufficient condition for global stability of delay-dependent synchronization is established based on the LMI technique. Numerical simulations fully support the analytical approach, in spite of the random delays.     

Semiconducting organic polymer from polyacrylamide–Cu++ chelate and iodine

Semiconducting organic polymer was obtained by the modification of polyacrylamide (PAAm)–Cu⁺⁺ chelate with iodine in acetone. Favorable conditions for preparing the chelate effective for the conduction were investigated. Surface resistivities were affected by the amounts of cupric salts and iodine, satisfactory results being given by about 25 wt % of the salts based on PAAm and more than 1 wt % of iodine on the chelate. The conductivity was also varied with the degree of neutralization of the chelate in solution, and optimal values were obtained by addition of about an equimolar amount of potassium hydroxide to cupric salts. Effective structures of the polymer chelate in solution were assumed on the basis of the visible and the NMR spectra and potentiometric titration.     

Topology evolution and gelation mechanism of agarose gel

Kinetics as well as the evolution of the agarose gel topology is discussed, and the agarose gelation mechanism is identified. Aqueous high melting (HM) agarose solution (0.5% w/v) is used as the model system. It is found that the gelation process can be clearly divided into three stages: induction stage, gelation stage, and pseudoequilibrium stage. The induction stage of the gelation mechanism is identified using an advanced rheological expansion system (ARES, Rheometric Scientific). When a quench rate as large as 30 deg C/min is applied, gelation seems to occur through a nucleation and growth mechanism with a well-defined induction time (time required for the formation of the critical nuclei which enable further growth). The relationship between the induction time and the driving force which is determined by the final setting temperature follows the 3D nucleation model. A schematic representation of the three stages of the gelation mechanism is given based on turbidity and rheological measurements. Aggregation of agarose chains is promoted in the polymer-rich phase and this effect is evident from the increasing mass/length ratio of the fiber bundles upon gelation. Continuously increasing pore size during gelation may be attributed to the coagulation of the local polymer-rich phase in order to achieve the global minimum of the free energy of the gelling system. The gel pore size determined using turbidity measurements has been verified by electrophoretic mobility measurements.