Fracture mechanism of liquid‐crystalline epoxy resin systems with different phase structures

A liquid‐crystalline epoxy resin was cured at two different temperatures. The phases of the cured systems clearly showed isotropic and nematic polydomain structures, which depended on the curing temperature. The fracture toughness of the systems was measured, and the fracture mechanism was investigated with polarized IR measurements. The nematic polydomain structure system showed considerably higher fracture toughness than the isotropic structure. Moreover, both systems exhibited a reorientation of the network chains near the fracture surface during the fracture process, and the region of the network reorientation in the nematic polydomain structure system was larger than that in the isotropic structure system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4044–4052, 2004     

Effect of plasma treatment on interface property of BCN/GaN structure

Interface properties of BCN/GaN metal-insulator-semiconductor (MIS) structures are investigated by X-ray photoelectron spectroscopy (XPS) and capacitance versus voltage (C-V) characteristics measurements. The BCN/GaN samples are fabricated by in situ process consisting of plasma treatment and deposition of BCN film in the plasma-assisted chemical vapor deposition (PACVD) apparatus. XPS measurement shows that the oxide formation at the BCN/GaN interface is suppressed by nitrogen (N₂) and hydrogen (H₂) plasma treatment. The interface state density is estimated from C-V characteristics measured at 1 MHz using Terman method. The minimum interface state density appears from 0.2 to 0.7 eV below the conduction band edge of GaN. The minimum value of the interface state density is estimated to be 3.0 × 10¹⁰ eV⁻¹ cm⁻² for the BCN/GaN structure with mixed N₂ and H₂ plasma treatment for 25 min. Even after annealing at 430 °C for 10 min, the interface state density as low as 6.0 × 10¹⁰ eV⁻¹ cm⁻² is maintained.     

A study of embolizing materials for chemo-embolization therapy of hepatocellular carcinoma: embolic effect of cisplatin albumin microspheres using chitin and chitosan in dogs, and changes of cisplatin content in blood and tissue.

Hepatic artery of dogs was embolized with cisplatin (CDDP) albumin microspheres containing chitin and chitosan to investigate the in vivo CDDP release kinetics from CDDP albumin microspheres, the CDDP cumulative characteristics in the liver, and the influence of microsphere administration on hepatic tissue. Results showed that changes in blood CDDP content were dependent on CDDP albumin microsphere type and that release kinetics were better sustained when chitin was added to the microspheres or when the microspheres were treated with chitosan. In particular, the administration of CDDP in the chitin-containing CDDP chitosan albumin microspheres showed a blood CDDP content of approximately 0.26 micrograms Pt/ml 14 d after administration. The administration of chitin-containing or chitosan treated CDDP microspheres showed a CDDP content in the hepatic tissue of 0.14 to 0.23 micrograms Pt/g 28 d after administration. They also showed better control of CDDP release than those without chitin or chitosan treatment. No CDDP influence on hepatic tissue was observed. We conclude that, even in vivo, chitin and chitosan are effective embolic materials.     

Dianion of sulfinylacetone as a synthetic equivalent of beta-enolate of propionic acid: a novel synthesis of carboxylic acids from alkyl halides with three-carbon elongation

The reaction of the dianion of phenylsulfinylacetone with alkyl halides afforded beta-keto sulfoxides, which were first chlorinated with hexachloroethane and then treated successively with KH and t-BuLi to give carboxylic acids in three-steps in moderate overall yields from the alkyl halides. This procedure affords a good method for a synthesis of carboxylic acids from alkyl halides with three-carbon elongation.     

NMR studies on the stereospecific polymerization of methyl vinyl ether. Part I. Polymerization by metal halides: Penultimate effect

Methyl vinyl ether (MVE) was polymerized under various conditions by BF₃·O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H catalysts. The effect of polymerization conditions on the steric structure of poly(methyl vinyl ether) (PMVE) was studied by NMR spectra. It was found that the triad isotacticity of PMVE decreased and the syndiotacticity and heterotacticity increased with increasing polarity of the solvent and increasing polymerization temperature. This result coincided with the qualitative conclusion estimated from softening point and infrared spectra. However, the variation of tacticity by the change of the polarity of a solvent was not so large as expected. There was no large difference between the behavior of BF₃·O(C₂H₅)₂ and SnCl₄·CCl₃CO₂H as catalysts. From the relation between the difference of free energy of monomer addition due to the steric structure of the polymer and the polymerization temperature, it was concluded that the penultimate effect really existed and was due to only the difference in enthalpy in the MVE–BF₃. O(C₂H₅)₂ or MVE–SnCl₄·CCl₃CO₂H systems. The penultimate effect was not greatly changed by the polymerization conditions in these systems.     

A new class of C1-symmetric monosulfoximine ligands for enantioselective hetero Diels-Alder reactions

Quinoline-based C1-symmetric sulfoximines have been used as chiral ligands in copper-catalyzed asymmetric hetero Diels-Alder reactions leading to cycloadducts with up to 96% ee.     

Synthesis and NMR studies of (13)C-labeled vitamin D metabolites

Isotope-labeled drug molecules may be useful for probing by NMR spectroscopy the conformation of ligand associated with biological hosts such as membranes and proteins. Triple-labeled [7,9,19-(13)C(3)]-vitamin D(3) (56), its 25-hydroxylated and 1 alpha,25-dihydroxylated metabolites (58 and 68, respectively), and other labeled materials have been synthesized via coupling of [9-(13)C]-Grundmann's ketone 39 or its protected 25-hydroxy derivative 43 with labeled A ring enyne fragments 25 or 26. The labeled CD-ring fragment 39 was prepared by a sequence involving Grignard addition of [(13)C]-methylmagnesium iodide to Grundmann's enone 28, oxidative cleavage, functional group modifications leading to seco-iodide 38, and finally a kinetic enolate S(N)2 cycloalkylation. The C-7,19 double labeling of the A-ring enyne was achieved by the Corey-Fuchs/Wittig processes on keto aldehyde 11. By employing these labeled fragments in the Wilson-Mazur route, the C-7,9,19 triple-(13)C-labeled metabolites 56, 58, and 68 as well as other (13)C-labeled metabolites have been prepared. In an initial NMR investigation of one of the labeled metabolites prepared in this study, namely [7,9,19-(13)C(3)]-25-hydroxyvitamin D(3) (58), the three (13)C-labeled carbons of the otherwise water insoluble steroid could be clearly detected by (13)C NMR analysis at 0.1 mM in a mixture of CD(3)OD/D(2)O (60/40) or in aqueous dimethylcyclodextrin solution and at 2 mM in 20 mM sodium dodecyl sulfate (SDS) aqueous micellar solution. In the SDS micellar solution, a double half-filter NOESY experiment revealed that the distance between the H(19Z) and H(7) protons is significantly shorter than that of the corresponding distance calculated from the solid state (X-ray) structure of the free ligand. The NMR data in micelles reveals that 58 exists essentially completely in the alpha-conformer with the 3 beta-hydroxyl equatorially oriented, just as in the solid state. The shortened distance (H(19Z))-H(7)) in micellar solutions as compared to that in the solid state is most easily rationalized on the basis that the 5(10)-torsion angle in 58 is decreased in micellar solutions as compared to that in the solid state.