Addition–fragmentation chain transfer: Molecular weight distributions and retardation in the system methyl methacrylate/methyl α‐(bromomethyl)acrylate

A detailed investigation of addition–fragmentation chain transfer (AFCT) in the free‐radical polymerization of methyl methacrylate (MMA) in the presence of methyl α‐(bromomethyl)acrylate (MBMA) was carried out to elucidate mechanistic details with efficient macromonomer synthesis as an underlying goal. Advanced modeling techniques were used in connection with the experimental work. Curve fitting of simulated and experimental molecular weight distributions with respect to the rate coefficient for addition of propagating radicals to MBMA (k_add) over 60–120 °C resulted in E_add = 21.7 kJ mol^?1 and A_add = 2.18 × 10⁶ M^?1 s^?1 and a very weak temperature dependence of the chain‐transfer constant (E_add ≈ E_p). The rate coefficient for fragmentation of adduct radicals at 60 °C was estimated as k_f ≈ 39 s^?1 on the basis of experimental data of the MMA conversion and the concentration of 2‐carbomethoxy‐2‐propenyl end groups. The approach developed is generic and can be applied to any AFCT system in which copolymerization does not occur and in which the resulting unsaturated end groups do not undergo further reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2640–2650, 2004     

Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006     

Fundamental investigation of thermal properties of rare-earth beta-diketonates

The thermal properties of the rare-earth chelates of Htfa (trifluoroacetylacetone) and Hhfa (hexafluoroacetylacetone) have been investigated. Thermogravimetric curves were obtained by heating samples in the injection chamber of a gas chromatograph, both in an atmosphere of helium, and of helium containing ligand vapour. None of the chelates was completely vaporized in a helium atmosphere at temperatures up to about 240 degrees , but the tfa chelate of Lu and all the hfa chelates were completely vaporized in the atmosphere of helium containing ligand vapour. The vapour pressures and heats of vaporization of these chelates were also measured.     

Gold-bead scanning near-field optical microscope with laser-force position control

We have developed a scanning near-field optical microscope with an optically trapped metallic particle that has a small diameter compared to the wavelength of visible light. In this microscope we employed spot illumination to enhance the intensity of light scattered from a probe particle so we could reduce the diameter of the probe particle to 40nm. We detected slight irregularities of the surface of the cover glass near 10-nm depth. Also, we observed gold colloidal particles on the surface of the cover glass.     

Broad-spectrum frequency comb generation and carrier-envelope offset frequency measurement by second-harmonic generation of a mode-locked fiber laser

A frequency comb spanning more than one octave has been achieved by injecting the second-harmonic generation (780 nm) of a mode-locked fiber laser (1.56 microm) into a photonic crystal fiber. We propose and realize a novel interferometric scheme for observing the carrier-envelope offset frequency of the frequency comb. Frequency noise has been observed on the measured carrier-envelope offset frequency, which has been confirmed to be generated in the photonic crystal fiber by comparing the measured beat frequencies between cw lasers and frequency combs before and after the photonic crystal fiber. The mode-locked fiber laser is considered to be an important candidate for the light source used in realizing a compact optical frequency measurement system including applications in the telecommunication bands.     

Unification of Laughlin and Moore-Read states in SUSY quantum Hall effect

Based on the recently proposed SUSY quantum Hall effect, we show that Laughlin and Moore-Read states are related by a hidden SUSY transformation. Regarding the SUSY Laughlin wavefunction as a master wavefunction, Laughlin and Moore-Read states appear as two extreme limits of component wavefunctions. Realizations of topological excitations on Laughlin and Moore-Read states are also discussed in the SUSY formalism. We develop a stereographically projected formulation of the SUSY quantum Hall effect. With appropriate interpretation of Grassmann odd coordinates, we illustrate striking analogies between SUSY quantum Hall effect and superfluidity.     

Signal measurement system for intra-body communication using optical isolation method

In this paper, we describe an induced signal measurement on the human body for developing a high-performance transceiver of an intra-body communication system. It is important to isolate awearable transceiver from an electrical instrument for precise measurement. We have developed a probe system using an optical isolation method including a laser diode, photo-diode, and optical fiber. The probe system can be successfully applied to the precise measurement of a receiving signal power at a wearable transceiver. We verify that the experimental results agree with the simulation results based on our previous channel model of intra-body communication.     

Compression curve of BaBiO3

The compression curve of BaBiO₃ was measured by X-ray diffraction method using a diamond anvil cell apparatus up to about 8 GPa. The diffraction pattern did not change in this pressure range, but the bulk modulus suddenly decreased near 4 GPa. The initial value of the bulk modulus, 157 GPa was estimated from the data up to 4 GPa.