Influence of the characteristics of soil and fly ash on the supercritical carbon dioxide extraction of dioxins.

Several investigations on the extraction of dioxins from soil and fly ash with supercritical fluid have been reported; however, few of them describe the influence of components on the extraction. We extracted dioxins from eight samples with different values of organic carbon content and surface area with supercritical CO(2) at a temperature of 463 K, a pressure of 40 MPa, and using 10% toluene as an entrainer. We researched the influence of the characteristics of soil and fly ash on supercritical CO(2) extraction of dioxins. The results revealed that the extraction efficiencies of PCDD/DFs and PCBs were high for all soil samples, while that of fly ash samples decreased with the increase in organic carbon content and surface area. The extraction efficiencies of dioxins from four standard samples, activated carbon, humic acid, alumina, and florisil, were also examined. The results revealed that the extraction efficiencies were strongly influenced by activated carbon like components present in the samples.     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

The Electronic Structure of Azuleno[1,2,3-cd]phenalene and Azuleno[5,6,7-cd]phenalene,a Comparison

The photoelectron (PE.) spectra of azuleno[l, 2, 3-cd]phenalene ( 1 ) and azuleno- [5,6,7-cd]phenalene( 2 ) have been recorded. The first five bands of both compounds could be assigned to transitions corresponding to removal of electrons from 4a₂, 6b₁, 5b₁, 3a₂ and 4b_l orbitals. This assignment is based mainly on a comparison between the observed ionization potentials and orbital energies calculated in a HMO and a PPP model. The UV./VIS. polarized absorption spectrum of 1 in the region 10000–45000 cm^?1 has been measured by means of the stretched film technique. The measurements were performed in polyethylene sheets at 77°K. Several bands could be assigned to π* ← π transitions calculated by a PPP-CI method. A comparison between the electronic structures of 1 and 2 is made by means of a simple HMO diagram.     

A highly sensitive spectrophotometric determination of beryllium with chromal blue G and cetyltrimethylammonium chloride

Chromal blue G in the presence of cetyltrimethylammonium chloride is proposed for the spectrophotometric determination of microgram amounts of beryllium. The sensitivity of color reaction between beryllium and chromai blue G has been greatly increased by the sensitizing action of cetyltrimethylammonium chloride (_626nm = 93,000). Beer's law is obeyed over the range 0.012–0.12 ppm of beryllium. Full color development occurs in 20 min at pH 5.5 and at 626 nm. The mole ratio of beryllium and chromai blue G in the complex is estimated to be 1:2. The proposed method is very sensitive and selective for determination of beryllium when EDTA is used as a masking agent.     

Retronasal Aroma of Beef Pate Analyzed by a Chewing Simulator

In retronasal aroma, the targeted aroma compounds are released from food during chewing. The changes in the food structures during chewing strongly influence the release of the compounds, therefore affecting the perception of food. Here, the relationship between retronasal aroma and food deliciousness based on the physicochemical properties of aroma compounds was examined. We considered the consumption of solid foods and the effect of oral parameters in elderly people. Beef pate was used as a model food sample to study the effect of the release of aroma compounds under controlled in vitro mastication and salivation conditions using a chewing simulator. We identified the effects of coexisting ingredients such as beef fat on the time course behavior of the release of aroma compounds. In particular, the release of the middle types of aromas was significantly faster with stronger chewing force, and higher with a high fat content of the sample. In addition, a larger release intensity was observed when soy proteins were partially substituted for beef proteins. Using an appropriate model saliva, a change in the salting-out effect from the saliva composition was found to be a factor, which could explain the lowering of aroma sensation in an elderly person.     

Coaxial holographic data storage without recording the dc components

A technique of recovering the data pages from Fourier holograms recorded without the dc components is demonstrated theoretically and experimentally by use of a coaxial holographic storage system. A reconstructed image is obtained by adding a phase-modulated dc component of the signal beam on reading. The bit error rate of the reconstructed image is comparable with that for the hologram recorded with the dc component as well. Since high intensities of the dc components are not recorded in this technique, the dynamic range of the recording media can be saved, which potentially contributes to increasing the number of multiplexed holograms.     

Evidence for strain glass in the ferroelastic-martensitic system Ti(50-x)Ni(50+x)

We report here "strain glass," a new glassy phenomenon in ferroelastic-martensitic system of Ni-rich intermetallic Ti(50-x)Ni(50+x) (x > 1), where local strain is frozen in disordered configuration below a critical temperature Tg. The ac elastic modulus shows a minimum at Tg, which exhibits logarithmic frequency dependence following Vogel-Fulcher relationship, and the corresponding internal friction shows a frequency-dependent peak located at a lower temperature. In situ high-resolution transmission electron microscopy observations reveal uncorrelated nanoclusters of martensiticlike phase, randomly frozen in the otherwise untransformed parentlike matrix. Being parallel to spin glass and relaxor, strain glass may shed new light on the fundamental physics of glass and lead to the discovery of novel properties.     

Aberration correction and its automatic control in scanning electron microscopes

An automatic aberration correction method has been implemented in scanning electron microscopes (SEM). Necessity of the automatic aberration correction is discussed. The procedure of the automatic aberration correction is explained in detail, where deconvolution techniques are used in order to extract probe information from SEM images. Due to the precise digitization and the usage of proper combinations of correction fields, linearity has been found between the amplitude of each aberration and the corresponding field strength. Experimental results are shown which demonstrate that the aberrations are corrected automatically by a linear feedback control method. After the automatic aberration correction, the image quality has been improved drastically.     

Early stages of decomposition of alloys (spinodal or nucleation)

Progress in theory and experiment on the early stage of decomposition of alloys is reviewed. In the first half of this paper, theoretical treatments on decomposition of alloys by spinodal and nucleation mechanism and also continuum theories and the discrete lattice theories are comparatively reviewed. In the latter half of this paper, experimental results on Al-Zn, Ni-Al, Cu-Co and Al-Ag alloys are discussed.