The Selection of the Optimal Impregnation Conditions of Vegetable Matrices with Iodine

This study aimed to determine the use of selected vegetables (pumpkin, cauliflower, broccoli, carrot) as carriers of potassium iodide (KI) and potassium iodate (KIO₃) by determining changes in iodine content under various conditions of impregnation as the degree of hydration, impregnated sample temperature, and impregnation time. The influence of these conditions on iodine contents in vegetables after their fortification and storage (21 °C/230 days) was analyzed. The results showed that all selected vegetables could be efficient iodine carriers. However, the conditions of the impregnation process are crucial for fortification efficiency, particularly the degree of hydration and the temperature of the impregnated samples before drying. The results showed that the lowest iodine content was in samples fortified at 4 °C and 1:4 hydration. On the other hand, the highest reproducibility of iodine was for the following fortification conditions: temperature of −76 °C and hydration of 1:1. The studies confirmed the higher stability of iodine in KIO₃ form compared to KI. To increase recovery of the introduced iodine in the product after drying, using the conditioning step at 4 °C is not recommended. We recommend freezing vegetables immediately after the impregnation process     

Buckwheat Hull-Enriched Pasta: Physicochemical and Sensory Properties

This work aimed to evaluate the effect of partial replacement of semolina with 0, 1, 5, 10, 15, and 20% of ground buckwheat hull (BH) on the chemical composition, antioxidant properties, color, cooking characteristics, and sensory properties of wheat pasta. Pasta samples were prepared by dough lamination (tagliatelle shape) and dried at 55 °C until the moisture content was 11–12% (wet basis). Analyses of samples showed that the addition of BH caused an increase in fiber content in pasta from 4.31% (control pasta) to 14.15% (pasta with 20% of BH). Moreover, the brightness and yellowness of BH-enriched products were significantly decreased compared to the control sample, and the total color difference ranged from 23.84 (pasta with 1% of BH) to 32.56 (pasta with 15% BH). In addition, a decrease in optimal cooking time, as well as an increased weight index and cooking loss, was observed in BH-enriched pasta samples. Furthermore, BH-enriched cooked pasta had significantly higher total phenolic content and antioxidant activity but an unpleasant smell and taste, especially if the level of BH was higher than 10%.     

Acid–Base Equilibrium and Self-Association in Relation to High Antitumor Activity of Selected Unsymmetrical Bisacridines Established by Extensive Chemometric Analysis

Unsymmetrical bisacridines (UAs) represent a novel class of anticancer agents previously synthesized by our group. Our recent studies have demonstrated their high antitumor potential against multiple cancer cell lines and human tumor xenografts in nude mice. At the cellular level, these compounds affected 3D cancer spheroid growth and their cellular uptake was selectively modulated by quantum dots. UAs were shown to undergo metabolic transformations in vitro and in tumor cells. However, the physicochemical properties of UAs, which could possibly affect their interactions with molecular targets, remain unknown. Therefore, we selected four highly active UAs for the assessment of physicochemical parameters under various pH conditions. We determined the compounds’ pK_a dissociation constants as well as their potential to self-associate. Both parameters were determined by detailed and complex chemometric analysis of UV-Vis spectra supported by nuclear magnetic resonance (NMR) spectroscopy. The obtained results indicate that general molecular properties of UAs in aqueous media, including their protonation state, self-association ratio, and solubility, are strongly pH-dependent, particularly in the physiological pH range of 6 to 8. In conclusion, we describe the detailed physicochemical characteristics of UAs, which might contribute to their selectivity towards tumour cells as opposed to their effect on normal cells.     

Novel C60 Fullerenol-Gentamicin Conjugate–Physicochemical Characterization and Evaluation of Antibacterial and Cytotoxic Properties

This study aimed to develop, characterize, and evaluate antibacterial and cytotoxic properties of novel fullerene derivative composed of C₆₀ fullerenol and standard aminoglycoside antibiotic–gentamicin (C₆₀ fullerenol-gentamicin conjugate). The successful introduction of gentamicin to fullerenol was confirmed by X-ray photoelectron spectroscopy which together with thermogravimetric and spectroscopic analysis revealing the formula of the composition as C₆₀(OH)₁₂(GLYMO)₁₁(Gentamicin)_0.8. The dynamic light scattering (DLS) revealed that conjugate possessed ability to form agglomerates in water (size around 115 nm), while Zeta potential measurements demonstrated that such agglomerates possessed neutral character. In vitro biological assays indicated that obtained C₆₀ fullerenol-gentamicin conjugate possessed the same antibacterial activity as standard gentamicin against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, and Escherichia coli, which proves that combination of fullerenol with gentamicin does not cause the loss of antibacterial activity of antibiotic. Moreover, cytotoxicity assessment demonstrated that obtained fullerenol-gentamicin derivative did not decrease viability of normal human fibroblasts (model eukaryotic cells) compared to control fibroblasts. Thus, taking into account all of the results, it can be stated that this research presents effective method to fabricate C₆₀ fullerenol-gentamicin conjugate and proves that such derivative possesses desired antibacterial properties without unfavorable cytotoxic effects towards eukaryotic cells in vitro. These promising preliminary results indicate that obtained C₆₀ fullerenol-gentamicin conjugate could have biomedical potential. It may be presumed that obtained fullerenol may be used as an effective carrier for antibiotic, and developed fullerenol-gentamicin conjugate may be apply locally (i.e., at the wound site). Moreover, in future we will evaluate possibility of its applications in inter alia tissue engineering, namely as a component of wound dressings and implantable biomaterials.     

Leptin in Human Milk—One of the Key Regulators of Nutritional Programming

Breast milk is the optimal food for infants and toddlers, providing basic nutrients. It is also a source of many biologically active substances. Among them are hormones responsible for metabolic balance. One of the hormones taken in with breast milk by a breastfed baby is leptin. This hormone is involved in the regulation of appetite, informing the brain about the body’s energy resources. Having the correct mechanisms related to the action of leptin is a factor reducing the risk of obesity. The natural presence of leptin in the composition of breast milk suggests that it has a specific role in shaping the health of a breastfed child. Obesity as a disease of civilization affects more and more people, including children. The development of this disease is multifaceted and determined by many factors, including genetic and environmental factors such as eating habits and low physical activity. Behind obesity, there are complex mechanisms in which many elements of the human body are involved. Understanding the effects of breastfeeding as a natural source of leptin can help prevent childhood obesity and development of this disease in future life.     

Gold Nanoparticles as Effective ion Traps in Poly(dimethylsiloxane) Cross-Linked by Metal-Ligand Coordination

At this time, the development of advanced elastic dielectric materials for use in organic devices, particularly in organic field-effect transistors, is of considerable interest to the scientific community. In the present work, flexible poly(dimethylsiloxane) (PDMS) specimens cross-linked by means of ZnCl₂-bipyridine coordination with an addition of 0.001 wt. %, 0.0025 wt. %, 0.005 wt. %, 0.04 wt. %, 0.2 wt. %, and 0.4 wt. % of gold nanoparticles (AuNPs) were prepared in order to understand the effect of AuNPs on the electrical properties of the composite materials formed. The broadband dielectric spectroscopy measurements revealed one order of magnitude decrease in loss tangent, compared to the coordinated system, upon an introduction of 0.001 wt. % of AuNPs into the polymeric matrix. An introduction of AuNPs causes damping of conductivity within the low-temperature range investigated. These effects can be explained as a result of trapping the Cl⁻ counter ions by the nanoparticles. The study has shown that even a very low concentration of AuNPs (0.001 wt. %) still brings about effective trapping of Cl⁻ counter anions, therefore improving the dielectric properties of the investigated systems. The modification proposed reveals new perspectives for using AuNPs in polymers cross-linked by metal-ligand coordination systems.     

Comparison of Physical Adsorption and Covalent Coupling Methods for Surface Density-Dependent Orientation of Antibody on Silicon

The orientation of antibodies, employed as capture molecules on biosensors, determines biorecognition efficiency and bioassay performance. In a previous publication we demonstrated for antibodies attached covalently to silicon that an increase in their surface amount Γ, evaluated with ellipsometry, induces changes in their orientation, which is traced directly using Time-of-Flight Secondary Ion Mass Spectroscopy combined with Principal Component Analysis. Here, we extend the above studies to antibodies adsorbed physically on a 3-aminopropyltriethoxysilane (APTES) monolayer. Antibodies physisorbed on APTES (0 ≤ Γ ≤ 3.5 mg/m²) reveal the Γ ranges for flat-on, side-on, and vertical orientation consistent with random molecular packing. The relation between orientation and Γ is juxtaposed for silicon functionalized with APTES, APTES modified with glutaraldehyde (APTES/GA) and N-hydroxysuccinimide-silane (NHS-silane). Antibody reorientation occurs at lower Γ values when physisorption (APTES) is involved rather than chemisorption (APTES/GA, NHS-silane). At high Γ values, comparable proportions of molecules adapting head-on and tail-on vertical alignment are concluded for APTES and the NHS-silane monolayer, and they are related to intermolecular dipole–dipole interactions. Intermolecular forces seem to be less decisive than covalent binding for antibodies on the APTES/GA surface, with dominant head-on orientation. Independently, the impact of glutaraldehyde activation of APTES on vertical orientation is confirmed by separate TOF-SIMS measurements.     

Antioxidant Activity of Ruthenium Cyclopentadienyl Complexes Bearing Succinimidato and Phthalimidato Ligands

In these studies, we investigated the antioxidant activity of three ruthenium cyclopentadienyl complexes bearing different imidato ligands: (η⁵-cyclopentadienyl)Ru(CO)₂-N-methoxysuccinimidato (1), (η⁵-cyclopentadienyl)Ru(CO)₂-N-ethoxysuccinimidato (2), and (η⁵-cyclopentadienyl)Ru(CO)₂-N-phthalimidato (3). We studied the effects of ruthenium complexes 1–3 at a low concentration of 50 µM on the viability and the cell cycle of peripheral blood mononuclear cells (PBMCs) and HL-60 leukemic cells exposed to oxidative stress induced by hydrogen peroxide (H₂O₂). Moreover, we examined the influence of these complexes on DNA oxidative damage, the level of reactive oxygen species (ROS), and superoxide dismutase (SOD) activity. We have observed that ruthenium complexes 1–3 increase the viability of both normal and cancer cells decreased by H₂O₂ and also alter the HL-60 cell cycle arrested by H₂O₂ in the sub-G1 phase. In addition, we have shown that ruthenium complexes reduce the levels of ROS and oxidative DNA damage in both cell types. They also restore SOD activity reduced by H₂O₂. Our results indicate that ruthenium complexes 1–3 bearing succinimidato and phthalimidato ligands have antioxidant activity without cytotoxic effect at low concentrations. For this reason, the ruthenium complexes studied by us should be considered interesting molecules with clinical potential that require further detailed research.     

Dielectric relaxation of water molecules in different lyotropic structures of nonylphenoxypoly(ethylenoxy)ethanol (Ark. 9)

Abstract

Dielectric relaxation of water molecules in the lamellar, L_α, cubic and hexagonal, H_α, lyotropic structures of nonylphenoxy-poly(ethylenoxy)ethanol (Ark. 9) has been studied by dielectric time domain spectroscopy in the frequency range between 10 MHz and 10 GHz. The values of the relaxation times, obtained at room temperature, are the following: 41 ps for the L_α phase, 29 ps for the cubic phase and 22 ps for the H_α phase. As is seen, the relaxation time of bound water is distinctly higher than that of pure water, and it depends strongly on the phase structure. The relaxation times measured for the liquid-crystalline phases as well as for pure Ark. 9 obey the Arrhenius law, and the energy barriers obtained have the following values: (20 ± 2) kJ/mol for all the liquid-crystalline phases, and (30 ± 3) kJ/mol for pure Ark. 9. The former is in good agreement with the value found for bound water in lipid systems whereas the latter is characteristic of the isotropic phase of thermotropic liquid crystals.     

Characterization of CaTi0.9Fe0.1O3/La0.98Mg0.02NbO4 composite

A composite of CaTi_0.9Fe_0.1O₃ and electrolyte material, i.e. magnesium doped La_0.98Mg_0.02NbO₄ was prepared and studied. The phase content and the sample microstructure was examined by an X-ray diffraction method and scanning electron microscopy. EDS measurements were done both for composite samples and the diffusion couple. The electrical properties were studied by four terminal DC method. The high-temperature interaction between the two components of the composite has been observed. It has been suggested that lanthanum diffused into the perovskite phase and substituted for calcium whereas calcium and niobium formed the Ca₂Nb₂O₇ pyrochlore phase. At 1500°C very large crystallites of the pyrochlore were observed. Regardless of strong interaction between the composite components, its total conductivity was weakly dependent on the sintering temperature.