Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

Thermally responsive polymeric micellar nanoparticles self-assembled from cholesteryl end-capped random poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide): synthesis, temperature-sensitivity, and morphologies

Cholesteryl end-capped thermally responsive amphiphilic polymers with two different hydrophobic/hydrophilic chain-length ratios were synthesized from the hydroxyl-terminated random poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) and cholesteryl chloroformate. The hydroxyl-terminated precursor polymers with narrow molecular weight distributions were synthesized by free-radical polymerization using 2-hydroxyethanethiol as a chain-transfer agent. The aqueous solutions of the cholesteryl end-capped copolymers exhibited reversible phase transitions at temperatures slightly above human body temperature, with the lower critical solution temperature values being 37.7 and 38.2 degrees C, respectively. The critical micelle concentration values of the two cholesteryl end-capped polymers were 9 and 25 mg/L, respectively. Polymeric micellar nanoparticles were prepared from the amphiphilic polymers using a dialysis method as well as a direct dissolution method. Transmission electron microscope studies showed that the micellar nanoparticles existed in different morphologies, including spherical, star-like, and cuboid shapes. Pyrene as a model hydrophobic compound could be readily encapsulated in these polymeric nanoparticles, at loading levels of 1.0 and 0.8 mg/g for the two cholesteryl end-capped polymers, respectively. The temperature sensitivity and unusual morphology of these novel polymeric nanoparticles would make an interesting drug delivery system.     

Bioactive Components and Anticancer Activities of Spray-Dried New Zealand Tamarillo Powder

Tamarillo fruit contains many phytochemicals that have beneficial therapeutic and nutritional properties. Spray-drying is widely used to preserve fruit puree in powder form. However, to obtain high-quality fruit powder, the optimisation of spray-drying conditions is necessary, as a high drying temperature can damage sensitive bioactive compounds. This study investigated the effects of spray-drying on the microstructure, polyphenolics, total flavonoids, total carotenoids, antioxidant activity, and anticancer capacity of tamarillo powder. Response surface methodology (RSM) was used to optimise the spray-drying process to produce tamarillo powder. The independent variables were inlet drying temperature (120–160 °C), flow rate (1–5 g/mL), and maltodextrin concentration (0–10%). These variables influenced the microstructural attributes, bioactive components, and cytotoxicity of the spray-dried tamarillo powder. The increase in polyphenols and antioxidant activities were favoured under high-temperature spray drying conditions and a low carrier concentration. The optimised spray-drying conditions for producing tamarillo powder with high antioxidant and anticancer activities, high yield, and stable bioactive compounds were found to be at 146.8 °C inlet temperature, and a flow rate of 1.76 g/mL.     

Oscillation and nonoscillation of Hill's equation with periodic damping

We prove new results on the oscillation and nonoscillation of the Hill's equation with periodic damping:

y″+p(t)y′+q(t)y=0,t?0,     

Photoluminescence of Y2O3:Eu thin film phosphors by sol-gel deposition and rapid thermal annealing

Y₂O₃:Eu³⁺ phosphor films have been developed by using the sol-gel process. Comprehensive characterization methods such as Photoluminescent (PL) spectroscopy, X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy were used to characterize the Y₂O₃:Eu³⁺ phosphor films. In this experiment, the XRD profiles show that the Y₂O₃:Eu³⁺ phosphor films crystallization temperature and optimum annealing temperature occur at about 650 and 750 °C, respectively. The optimum dopant concentration is 12 mol% Eu³⁺ and the critical transfer distance (R_c) among Eu³⁺ ions is calculated to be about 0.84 nm. Vacuum environment is more efficient than oxygen and nitrogen to eliminate the OH content and hence yields higher luminescent phosphor films. The PL emission intensity of Y₂O₃:Eu³⁺ phosphor films is also dependent on the annealing time. It was found that the H₂O impurities were effectively eliminated after annealing time of 25 s at 750 °C in vacuum environment. From the experiment results, the schematic energy band diagram of Y₂O₃:Eu³⁺ phosphor films is constructed.     

Ab initio calculation of phonons in bulk HfC and the HfC(001)(1 × 1) surface

Structural, elastic and dynamical properties of the rock-salt HfC have been studied by employing an ab initio pseudopotential method and a linear response scheme, within the generalised gradient approximation. In addition to achieving good agreement with experimental measurements of the phonon dispersion results along the symmetry direction Γ-X, we have presented accurate dispersion results along several other directions in the Brillouin zone. Sharp features in the phonon density of states are ascertained and their origin discussed. This is followed by investigations of the structural, electronic and phonon properties of the HfC(001) surface. The agreement between our surface phonon spectrum and experimental measurements is very good. By analysing the atomic displacement patterns of the zone-centre and zone-edge phonon modes we have determined the energy locations and polarisation characteristics of Fuchs–Kliewer, Wallis, Lucas and Rayleigh modes.     

Pion-He scattering length

We present relativistic three-body calculations for the real part of the π-⁴He scattering length Re a. Nucleon binding, exclusion principle and Fermi motion are all included in a very careful manner. Because of our careful evaluation of the single-scattering process the remaining discrepancies with the experimental data can be attributed to higher-order mechanisms involving more than one nucleon. In particular for the πA S-wave interaction at threshold, one expects that these higher-order contributions arise largely from the absorption effect. We have performed our calculations for four current models of the input πN t-matrix. Using a πN t-matrix which reproduces the low energy πN phase shifts correctly leads to Re a_abs -Im a_abs, if we attribute the discrepancy of the calculated value with the accurately determined empirical value of Re a to pion absorption. We determine the strength parameter B₀ in a p² optical potential term from an adjustment to the π-⁴He scattering length. Finally some cross sections are calculated for T^lab_π = 10 MeV and T^lab_π = 15 MeV.     

The connection of the nuclear “Coriolis” force with classical mechanics

The relation between the socalled Coriolis couplingI · j, operating in rotating nuclei, and the classical Coriolis force is discussed. The system forces acting in the cranking model for non-uniform rotation and in the rotator-particle model are examined. Differences with the molecular Coriolis coupling are indicated.     

Influence of electrolytic hydrogen on the etch pit density of iron (110) surfaces

Etch pit densities on iron (110) surfaces in sulphuric acid grow linearly with the interfacial hydrogen activity in excess of a critical activity. The hydrogen activity is approximately proportional to the square root of the cathodic current density. At constant cathodic current density the etch pit density increases with temperature and decreases with external stress. Dislocations at which the excess etch pits form penetrate into the iron at a rate proportional to the hydrogen activity and the square root of time. Effects of prior hydrogen deposition on the shape of etch pits are seen at depths greater than the penetration depth of hydrogen generated dislocations. Changes of etch pit shape similar to those produced by hydrogen are also found when external stress is applied.The results are compared to Prussin's theory in which the assumption is made that stresses accompanying diffusion of an impurity are fully relieved by plastic deformation and formation of dislocations for stresses exceeding a critical stress. While some of the predictions of the theory are met by the experiments, the dislocations penetrate into the iron much slower than diffusion of hydrogen, since dislocations cannot move fast enough, i.e. stresses are not fully relieved.