2‐Amino‐4‐chloro‐6‐[N‐methyl‐N‐(4‐methylphenyl)amino]pyrimidine: formation versus fragmentation of hydrogen‐bonded chains of edge‐fused R22(8) rings in 4,6‐disubstituted 2‐aminopyrimidines

Molecules of the title compound, C₁₂H₁₃ClN₄, are linked by two independent N—H...N hydrogen bonds into a chain of edge‐fused R₂²(8) rings. The significance of this study lies in its attempt to rationalize the patterns of supramolecular aggregation in the title compound and in a range of analogous 4,6‐disubstituted 2‐aminopyrimidines.     

An easy and fast way to determine the enantiomeric purity of substituted cyclanones

The determination of the enantiomeric purity of 2 or 3-substituted cyclanones, particularly cyclohexanones, is conveniently achieved by derivatisation into cyclic aminals with commercially available (R, R)-1,2-diphenylethylenediamine. The derivatisation procedure is directly done into the NMR tube, instantaneously, and ¹³C NMR allows an accurate measure of the ee.     

Multicommuted fluorometric multiparameter sensor for simultaneous determination of naproxen and salicylic acid in biological fluids.

A combined approach based on solid-phase optosensing and multicommutation principles has been applied to develop a method for the simultaneous analysis of two pharmaceuticals (naproxen and salicylic acid) in biological fluids. The multicommuted flow-through optosensor was based on direct native fluorescence measurements of both analgesics using a non-polar sorbent (C18 silica gel) as a solid sensing zone. The flow system was controlled by Java-written home-made software and designed using three-way solenoid valves for an independent automated manipulation of sample and carrier solutions. Using an optimized sampling time, the method was calibrated in the range of 1 - 25 and 5 - 200 ng mL(-1). The obtained detection limits were 0.3 and 1.3 ng mL(-1) for naproxen and salicylic acid, respectively, with RSD (%) values of better than 2% for both analytes. The proposed methodology was successfully applied to urine, serum and pharmaceutical preparations. Recovery percentages ranging from 96.1 to 104% were obtained for both analytes.     

Syntheses,crystal structures and blue emission of three zinc(II) coordination polymers with a 4,4′‐dicarboxybiphenyl sulfone ligand

Three novel zinc complexes [Zn(dbsf)(H₂O)₂] ( 1 ), [Zn(dbsf)(2,2′‐bpy)(H₂O)]·(i‐C₃H₇OH) ( 2 ) and [Zn(dbsf)(DMF)] ( 3 ) (H₂dbsf = 4,4′‐dicarboxybiphenyl sulfone, 2,2′‐bpy = 2,2′‐bipyridine, i‐C₃H₇OH = iso‐propanol, DMF = N,N‐dimethylformamide) were first obtained and characterized by single crystal X‐ray crystallography. Although the results show that all the complexes 1–3 have one‐dimensional chains formed via coordination bonds, unique three‐dimensional supramolecular structures are formed due to different coordination modes and configuration of the dbsf^2? ligand, hydrogen bonds and π–π interactions. Iso‐propanol molecules are in open channels of 2 while larger empty channels are formed in 3 . As compared with emission band of the free H₂dbsf ligand, emission peaks of the complexes 1–3 are red‐shifted, and they show blue emission, which originates from enlarging conjugation upon coordination. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007     

Hypotheses sur la formation par pyrolyse du premier intermediaire a silicium digonal

The synthesis of 2,8-dimethyl 3,9-dichloro 6-sila[5.5] spiro undecatetra 2.4,8,10-ene is described. The thermal decomposition of the adduct formed by the reaction of this product with methyl acetylene dicarboxylate is studied. From the characterization of the copyrolysis products, two possible mechanisms are proposed which imply the formation of digonal silicon such as 2-silaallene and 2-silaketene.     

Polarographic determination of pilocarpine using the catalysed pre-wave of nickel(II)

On the basis of a detailed study of the pilocarpine-induced nickel(II) pre-wave using various polarographic techniques, an electrode process mechanism is proposed in which the formation of a catalytic complex between aquo-nickel(II) and veronalate-nickel(II) on the one hand and unprotonated pilocarpine adsorbed on the electrode surface on the other is followed by the reduction of nickel(II) in the complex and the release of the catalytic ligand. The pre-peak recorded by differential-pulse polarography in the system 1 × 10^?3 M Ni(II)-1 × 10^?2 M sodium veronal, nitric acid (pH 8.5) (with ionic strength maintained at 0.2 with sodium nitrate) can be used for quantitative determination of pilocarpine at concentrations in the range 2.5 × 10^?7-8 × 10^?6 M.     

Synthesis, crystal structure, and properties of MnNCN, the first carbodiimide of a magnetic transition metal

Synthesis, single-crystal structure determination, and magnetic properties are reported for manganese carbodiimide, MnNCN. The presumably unstable but inert phase adopts the trigonal system (R3m) with a = 3.3583(4) A, c = 14.347(2) A, V = 140.13(3) A3, and Z = 3. Divalent manganese is octahedrally coordinated by nitrogen atoms at 2.26 A, and the NCN(2-) unit adopts the linear [N=C=N](2-) carbodiimide shape with two C=N double bonds of 1.23 A. MnNCN contains high-spin Mn(II) with five unpaired electrons and behaves like an antiferromagnet with an ordering temperature below 30 K.     

Dihydroaromatic compounds in the Diels-Alder reaction—IV : Synthesis of bicyclic ketones

The in situ isomerisation and Diels-Alder reaction with 2-acetoxyacrylonitrile, of 2,5-dihydroanisole, leads to the adducts (1) which may be used as starting point for the synthesis of a number of bicyclo [2,2,2] octenones, bicyclo [3,2,1] octenones and bicyclo [3,2,2] nonenones. Under similar conditions, 2,5-dihydrotoluene reacts via an ene-reaction to produce, after hydrolysis, the acetylcyclohexadiene (27). The base-catalysed equilibration and subsequent Diels-Alder reactions of 2,5-dihydrotoluene have been investigated.     

Numerical Study of Pore Sizes Distribution in Gels

We introduce a new numerical technique for the calculation of the pore size distribution in two-dimensional disordered systems. Our method is based on a triangulation technique which allows a closer measurement of pores surface without any morphological hypothesis.In this work, we focus our calculations in simulated gels. Such materials are modeled in two different conditions: by means of the Diffusion-Limited and Reaction-Limited Cluster-cluster Aggregation algorithms, DLCA and RLCA, respectively. In both situations, when the particles concentration decreases, the average pores size increases. The more compact cluster in RLCA, compared with DLCA, is consistent with the pore size distribution we have calculated. The simulated mean pore size is quantitatively in agreement with experimental data from literature.