Comparison of two post-column derivatization systems, ultraviolet irradiation and electrochemical determination, for the liquid chromatographic determination of aflatoxins in food

This study compared 2 post-column derivatization (PCD) techniques for the determination of aflatoxins B1, B2, G1, and G2 (AFB1, AFB2, AFG1, and AFG2) by fluorescence detection after liquid chromatographic separation: ultraviolet (UV) irradiation (PCD(UV)) and electrochemical bromination (PCD(EC)). Photochemical fluorescence enhancement was obtained with 2 different commercially available systems (PCD(UV1) and PCD(UV2)). An electrochemical bromination apparatus was used for bromination. Analyses of naturally contaminated or spiked samples of corn, pistachio paste, peanut butter, fig paste, and animal feed showed that neither of the techniques resulted in derivatization-specific matrix interferences for any of the matrixes under study, even when extracts were not completely purified. The response ratios PCD(UV)/PCD(EC) for AFB1, AFB2, AFG1, and AFG2 were 0.86, 0.96, 0.70, and 0.96, respectively, for PCD(UV1) and 0.82, 0.95, 0.60, and 0.90, respectively, for PCD(UV2). The long-term use of the UV lamps (300 h for PCD(UV1) and 343 h for PCD(UV2)) in the photochemical detectors showed that these ratios remained stable throughout the time frame investigated. The relative standard deviation obtained for each of the devices during the in-house validation study ranged from 0.3 to 1.8% for PCD(UV1), from 0.8 to 1.3% for PCD(UV2), and from 0.9 to 2.0% for PCD(EC).     

Biochemical Characterization and In Vitro Digestibility of Protein Isolates from Hemp (Cannabis sativa L.) By-Products for Salmonid Feed Applications

Hemp (Cannabis sativa L.) processing by-products (hemp cake and hemp seed hulls) were studied for their protein content, extraction of protein isolates (PIs), and their in vitro protein digestibility (IVPD). Crude protein contents of hemp cake and hemp seed hulls were 30.4% and 8.6%, respectively, calculated based on generalized N-to-P conversion factor (N × 5.37). Extraction efficiency of PIs from defatted biomass ranged from 56.0 to 67.7% with alkaline extraction (0.1 M NaOH) followed by isoelectric precipitation (1.0 M HCl). Nitrogen analysis suggested that the total protein contents of PIs extracted using three different alkaline conditions (0.5 M, 0.1 M, and pH 10.0 with NaOH) were >69.7%. The hemp by-product PIs contained all essential amino acids (EAAs) required for fish with leucine, valine, and phenylalanine belonging to the five dominant amino acids. Overall, glutamate was the dominant non-EAA followed by aspartate. Coomassie staining of an SDS-PAGE gel revealed strong presence of the storage protein edestin. High IVPD of >88% was observed for PIs extracted from hemp seeds and by-products when evaluated using a two-phase in vitro gastric/pancreatic protein digestibility assay. PIs extracted from by-products were further tested for their antioxidant activities. The tested PIs showed dose-dependent DPPH radical scavenging activity and possessed strong ORAC values > 650 μM TE/g.     

Screening and interlayer coupling in multilayer MoS2

The two‐dimensional layered semiconducting di‐chalcogenides are emerging as promising candidates for post‐Si‐CMOS applications owing to their excellent electrostatic integrity and the presence of a finite energy bandgap, unlike graphene. However, in order to unravel the ultimate potential of these materials, one needs to investigate different aspects of carrier transport. In this Letter, we present the first comprehensive experimental study on the dependence of carrier mobility on the layer thickness of back‐gated multilayer MoS₂ field‐effect transistors. We observe a non‐monotonic trend in the extracted effective field‐effect mobility with layer thickness which is of relevance for the design of high‐performance devices. We also discuss a detailed theoretical model based on Thomas–Fermi charge screening and interlayer coupling in order to explain our experimental observations. Our model is generic and, therefore, is believed to be applicable to any two‐dimensional layered system.

     

Crystalline Pr:SrAl12O19 waveguide laser in the visible spectral region

We fabricated waveguides in Pr:SrAl(12)O(19) crystals by direct femtosecond laser writing. The propagation losses were calculated to be as low as 0.16 dB/cm at a wavelength of 633 nm. Laser oscillation in a diode-pumped waveguide at a wavelength of 643.5 nm was realized. The output power of the waveguide laser was 28.1 mW at a slope efficiency of 8%.     

Polarized light propagating in a magnetic field as a probe for millicharged fermions

Possible extensions of the standard model of particle physics suggest the existence of particles with small, unquantized electric charge. Photon-initiated pair production of millicharged fermions in a magnetic field would manifest itself as a vacuum magnetic (VM) dichroism. We show that laser polarization experiments searching for this effect yield, in the mass range below 0.1 eV, much stronger constraints on millicharged fermions than previous laboratory searches. VM birefringence due to virtual pair production gives a slightly better constraint for masses between 0.1 and a few eV. We comment on the possibility that the VM dichroism observed by PVLAS arises from pair production of such millicharged fermions rather than from single production of axionlike particles. Such a scenario can be confirmed or firmly excluded by a search for invisible decays of orthopositronium with a branching-fraction sensitivity of about 10(-9).     

Measurement of the Seperation between Atoms beyond Diffraction Limit

We propose a scheme to obtain the distance of two identical atoms placed inside the standing wave field by monitoring the collective resonance fluorescence spectrum emitted by the two particles. We find three different parameter ranges, depending on the distance of the atoms as compared to the transition wavelength. For large interparticle distances, dipole-dipole coupling is negligible, and the main system evolution arises from the interaction with the standing wave field. In the small-distance limit, the dynamics is dominated by the dipole-dipole interaction. Finally, in the intermediate region, a rich interplay of the various couplings arises, which however is lifted for strong driving laser fields. The present measurement procedure allows us to distinguish the three cases. In each of the cases, we show how to determine the distance of the two particles and their respective positions relative to the nodes of the standing wave field with fractional-wavelength precision.     

Electrical transport and noise in semiconducting carbon nanotubes

We investigate electrical transport and noise in semiconducting carbon nanotubes. By studying carbon nanotube devices with various diameters and contact metals, we show that the ON-currents of CNFETs are governed by the heights of the Schottky barriers at the metal/nanotube interfaces. The current fluctuations are dominated by 1/f noise at low-frequencies and correlate with the number of transport carriers in the device regardless of contact metal.     

Modified Bridgman anvils for high pressure synthesis and neutron scattering

ABSTRACT

A simple modified Bridgman design for large volume pressure anvils usable in the Paris-Edinburgh (PE) press has been demonstrated at Oak Ridge National Laboratory Spallation Neutron Source. The design shows advantages over the toroidal anvils typically used in the PE press, mainly rapid compression/decompression rates, complete absence of blow-outs upon drastic phase transitions, simplified cooling, high reliability, and relative low loads (～40 tons) corresponding to relatively high pressures (～20?GPa). It also shows advantages over existing large-volume diamond cells as sample volumes of ～2–3?mm³ can be easily and rapidly synthesized. The anvils thus allow sample sizes sufficient for in situ neutron diffraction as well as rapid synthesis of adequate amounts of new materials for ex situ analysis via total neutron scattering and neutron spectroscopy.     

Passively mode-locked Yb:YAG thin-disk laser with pulse energies exceeding 13 microJ by use of an active multipass geometry

We demonstrate the generation of high-energy picosecond pulses directly from a thin-disk laser oscillator by employing a self-imaging active multipass geometry. Stable single-pulse operation has been obtained with an average output power in excess of 50 W, excluding a cw background of 8%, at a repetition rate of 3.8 MHz. Self-starting passive mode locking was accomplished using a semiconductor saturable absorber mirror. The maximum pulse energy was 13.4 microJ at a pulse duration of 1.36 ps with a time-bandwidth product of 0.34. Single-pass external frequency doubling with a conversion efficiency of 60% yielded >28 W of average power at 515 nm.