Characterization of low-energy chlorophylls in the PSI-LHCI supercomplex from Chlamydomonas reinhardtii. A site-selective fluorescence study

Almost all photosystem I (PSI) complexes from oxygenic photosynthetic organisms contain chlorophylls that absorb at longer wavelength than that of the primary electron donor P700. We demonstrate here that the low-energy pool of chlorophylls in the PSI-LHCI complex from the green alga Chlamydomonas reinhardtii, containing five to six pigments, is significantly blue-shifted (A(max) at 700 nm at 4 K) compared to that in the PSI core preparations from several species of cyanobacteria and in PSI-LHCI particles from higher plants. This makes them almost isoenergetic with the primary donor. However, they keep the other characteristic features of "red" chlorophylls: clear spectral separation from the bulk chlorophylls, big Stokes shift revealing pronounced electron-phonon coupling, and large homogeneous and inhomogeneous broadening of approximately 170 and approximately 310 cm(-1), respectively.     

Geometry prediction of hafnocenes by quantum chemical methods

The performance of quantum chemical methods for geometry prediction of hafnocenes was evaluated. HF, B3LYP and MP2 in combination with nonrelativistic (MHF) and relativistic (MWB and LANL2DZ) basis sets for hafnium together with standard basis sets 3-21G*, 6-31G* and 6-311G** for other elements were applied. Five basic structural parameters of the optimized structures of the hafnocenes were compared with experimental crystal structures obtained from the Cambridge structural database. Altogether 80 hafnocenes were included in the analysis. The results show that relativistic corrections are necessary for Hf atom. However, even the Hartree–Fock (HF) method, when combined with relativistic pseudopotentials, reproduces the experimental crystal structures with significant accuracy. The good performance of the HF method can be understood to originate from the absence of significant near-degeneracy correlations for hafnium. On average, the B3LYP and MP2 methods provide structural parameters somewhat closer to the experimental ones.     

Development of quantitative vitellogenin-ELISAs for fish test species used in endocrine disruptor screening

The yolk protein precursor vitellogenin (Vtg) in plasma has proved to be a simple and sensitive biomarker for assessing exposure of fish to environmental estrogens. Within international bodies such as the Organization for Economic Cooperation and Development (OECD) work is ongoing to develop screening and testing programmes for endocrine disrupting effects of new chemicals, and in the focus of this development are the fish test species common carp (Cyprinus carpio), fathead minnow (Pimephales promelas), zebrafish (Danio rerio) and Japanese medaka (Oryzias latipes). In this study we have developed quantitative enzyme linked immunosorbent assays (ELISAs) for Vtg in common carp/fathead minnow, zebrafish and Japanese medaka. The assays were developed using a combination of monoclonal and polyclonal fish Vtg antibodies in a sandwich format, using stabilized Vtg from the test species as a standard. The carp Vtg ELISA has a working range of 1–63 ng/mL, a minimal detection limit of 0.6 ng/mL, and may also be used for quantification of Vtg in fathead minnow. In fathead minnow whole-body homogenate samples, the practical detection limit is 400 ng/mL due to the matrix effect. The zebrafish Vtg ELISA has a working range of 0.5–63 ng/mL, a minimal detection limit of 0.4 ng/mL, and a practical detection limit of 200 ng/mL in whole-body homogenate samples. The medaka Vtg ELISA has a working range of 0.25–16 ng/mL, a minimal detection limit of 0.1 ng/mL, and a practical detection limit of 125 ng/mL in whole-body homogenate samples. The intra- and inter-assay variations were below 20% for all assays. The assays were evaluated with sets of representative samples spanning the wide dynamic range of Vtg-levels found in fish exposed to environmental estrogens, and all three assays are currently undergoing international inter-laboratory validation.     

Excitation decay pathways of Lhca proteins: a time-resolved fluorescence study

Light-harvesting complex I (LHCI), which serves as a peripheral antenna for photosystem I (PSI) in green plants, consists mainly of four polypeptides, Lhca1-4. We report room temperature emission properties of individual reconstituted monomeric Lhca proteins (Lhca1, -2, -3, and -4) and dimeric Lhca1/4, performed by steady-state and time-resolved fluorescence techniques. The emission quantum yields of the samples are approximately 0.12, 0.085, 0.081, 0.041, and 0.063 for Lhca1, -2, -3, -4, and the -1/4 dimer, respectively, which is considerably lower than the value of 0.22 found for light-harvesting complex II (LHCII), the main peripheral antenna complex of photosystem II in green plants. The decay components of LHCI proteins can be divided in two categories: Lhca1 and Lhca3 have decay times of 1.1-1.6 ns and 3.3-3.6 ns, and Lhca2 and Lhca4 have decay times of 0.7-0.9 ns and 3.1-3.2 ns. These categories seem to correlate with the pigment composition of the samples. All decay times are faster than that observed previously for LHCII. When the absolute emission yields and the lifetimes of the Lhca samples are combined, the overall emission properties of the individual Lhca proteins are expressed in terms of their emitting dipole moment strength. In the samples without extreme red states, that is, Lhca1 and Lhca2, the emitting dipole moment has a value close to unity (relative to monomeric chlorophyll in acetone), which is similar to that for LHCII, whereas, in the samples with the red-most state (F-730), that is, Lhca3, -4, and the -1/4 dimer, the emitting dipole moment has a value less than unity (0.6-0.8), which can be explained by mixing the red-most (exciton) state with a dark charge-transfer state, as suggested in previous PSI red pigment studies. In addition, we find a lifetime component of approximately 50-150 ps in all red-pigment-containing samples, which cannot be due to "slow" energy transfer, but is instead assigned to an unrelaxed state of the pigment-protein, which, on this time-scale, is converted into the final emitting state.     

Adaptation of the human skin by chronic solar-simulating UV irradiation prevents ultraviolet-B irradiation-induced rise in serum C-reactive protein levels

Exposure of the skin to UV radiation induces local inflammation. We hypothesized that inflammation induced by erythemal UV-B irradiation could elevate levels of serum C-reactive protein (CRP) and that suberythemal repeating doses of solar-simulating UV radiation (SSR) would produce photoadaptation to such inflammation. Separation-free high-sensitivity assays of CRP show an increase by 42% (P = 0.046) in CRP concentrations in healthy human subjects 24 h after a 3 minimal erythemal dose (MED) dose of UV-B delivered onto a 100 cm2 skin area. Preceding daily suberythemal doses of whole-body SSR for 10 or 30 consecutive days completely prevented the CRP increase. UV-B-induced skin erythema was partially attenuated by 30 preceding days of SSR only (P = 0.00066). After 10 daily SSR doses, the mean baseline CRP concentrations (0.24 +/- 0.21 mg/L) declined by 35% (P = 0.018). Using high-sensitivity analysis of serum CRP as the endpoint marker for cutaneous inflammation, we show that acute exposure of even a relatively small skin area to erythemal UV-B induces skin inflammation detectable also at the systemic level and that photoadaptation by preceding repeating suberythemal doses of SSR reduces signs of inflammation. Our data complement the view given by previous studies in that local photoadaptation also has systemic manifestations.     

Particle-stabilized emulsions comprised of solid droplets

We kinetically stabilize oil-in-water emulsions comprising paraffin crystals by adsorbing solid particles (silica) of colloidal size at the oil/water interface. We obtain a set of emulsions that are quiescently stable for a long period of time (months), while the same emulsions are destabilized after only a few hours in the presence of surfactant molecules alone. The emulsions are submitted to a shear stress in order to probe their stability under flow conditions. Partial coalescence and gelation occur when the shear is applied for a sufficiently long period of time. The experiments reveal the existence of a critical droplet mass fraction, phi*, that defines a sharp transition between slow and fast gelation. The process of gelation is rather slow for phi < phi*, occurring at the scale of hours, and becomes almost instantaneous above phi*.     

Analysis of hydrogen peroxide and an organic hydroperoxide via the electrocatalytic Fenton reaction

A new concept for the electrochemical detection of hydrogen peroxide, and organic hydroperoxides is presented. One advantage of the significance of this technique is that it does not require chemical modification of the electrode or addition of enzymes. Direct electro-reduction of the peroxides was not observed on the carbon disk electrode as it is a kinetically slow process. Redox cycling of the iron complex is apparent as Fe^IIEDTA rapidly reduces the O-O bond of the peroxides (Fenton Reaction) upon its production by the kinetically facile electro-reduction of Fe^IIIEDTA. This provides an enhanced and steady-state reductive current as observed by cyclic voltammetry. These features are indicative of the electrocatalytic (EC′) mechanism. A calibration curve was constructed based on the chronoamperometric response at 32 s and a detection limit for H₂O₂ and t-butyl hydroperoxide was calculated to be 0.4 μM and 20 µM, respectively. This difference is attributable to the rate in which the iron(II) complex reduces the O-O bond, H₂O₂ (2.3 × 10⁵ M^− 1 s^− 1) being faster than for the organic peroxide (5.1 × 10⁴ M^− 1 s^− 1). The Fe^IIEDTA complex was observed to be unreactive toward dialkyl peroxides. This method may find use in the detection of peroxide-based explosives or in enzymatic assays as it is rapid, simple, inexpensive and should prove to be robust.     

Cellulose nanocrystal submonolayers by spin coating

Dilute concentrations of cellulose nanocrystal solutions were spin coated onto different substrates to investigate the effect of the substrate on the nanocrystal submonolayers. Three substrates were probed: silica, titania, and amorphous cellulose. According to atomic force microscopy (AFM) images, anionic cellulose nanocrystals formed small aggregates on the anionic silica substrate, whereas a uniform two-dimensional distribution of nanocrystals was achieved on the cationic titania substrate. The uniform distribution of cellulose nanocrystal submonolayers on titania is an important factor when dimensional analysis of the nanocrystals is desired. Furthermore, the amount of nanocrystals deposited on titania was multifold in comparison to the amounts on silica, as revealed by AFM image analysis and X-ray photoelectron spectroscopy. Amorphous cellulose, the third substrate, resulted in a somewhat homogeneous distribution of the nanocrystal submonolayers, but the amounts were as low as those on the silica substrate. These differences in the cellulose nanocrystal deposition were attributed to electrostatic effects: anionic cellulose nanocrystals are adsorbed on cationic titania in addition to the normal spin coating deposition. The anionic silica surface, on the other hand, causes aggregation of the weakly anionic cellulose nanocrystals which are forced on the repulsive substrate by spin coating. The electrostatically driven adsorption also influences the film thickness of continuous ultrathin films of cellulose nanocrystals. The thicker films of charged nanocrystals on a substrate of opposite charge means that the film thickness is not independent of the substrate when spin coating cellulose nanocrystals in the ultrathin regime (<100 nm).