Gravimetric determination of zirconium with a new azopyrazolone derivative

3-Methyl-5-oxo-1-phenyl-2-pyrazolin-4-ylazo-2'-(6',8'-naphthalenedisulfonic acid) (disodium salt) is proposed as a new reagent for the gravimetric determination of zirconium. The precipitate formed at pH 1–1.5 can be weighed directly and there are few interferences.     

Einwirkung von p-Nitroso-dimethylanilin auf Brenztraubensäure und ihre Derivate, 6. Mitt.: Kondensation der Phenylbrenztraubensäure mit primären aromatischen Aminen

Phenylpyruvic acid reacts with p-nitroaniline to yield the 3-hydroxypyrrolinone2a, and with anilines bearing+M substituents in the p-position to yield the 3-enaminopyrrolinones1b-1e.

---

---

Mit 1 Abbildung

---

5. Mitt.:M. Ruse, E. Hamburg undM. Petri, Chem. Ber.103, 3727 (1970).     

Ultrasound-Assisted Synthesis of Fluorescent Azatetracyclic Derivatives: An Energy-Efficient Approach

We report here an energy-efficient and straight synthesis of two new classes of derivatized fluorescent azatetracycles under ultrasound (US) irradiation. A first class of azatetracyclic compounds was synthesized by heterogeneous catalytic bromination of the α-keto substituent attached to the pyrrole moiety of the tetracyclic cycloadducts, while for the second, one class was synthesized by nucleophilic substitution of the bromide with the azide group. Comparative with conventional thermal heating (TH) under US irradiation, both types of reactions occur with substantially higher yields, shortened reaction time (from days to hours), lesser energy consumed, easier workup of the reaction, and smaller amounts of solvent required (at least three to five-fold less compared to TH), which make these reactions to be considered as energy efficient. The derivatized azatetracycle are blue emitters with λmax of fluorescence around 430–445 nm. A certain influence of the azatetracycle substituents concerning absorption and fluorescent properties was observed. Compounds anchored with a bulky azide group have shown decreased fluorescence intensity compared with corresponding bromides.     

Wastes from Wood Extraction Used in Composite Materials: Behavior after Accelerated Weathering

New materials were obtained by incorporating in polypropylene (PP) matrix 60% wood wastes resulting after extraction with supercritical carbon dioxide, water, and ethanol. Structural, mechanical, thermal, and rheological characterizations, as well as moisture uptake of the composites, were evaluated before and after accelerated weathering. It was found that the extraction method influenced the composite properties due to the hydrophilic-hydrophobic balance. The addition of extracted fibers results in an increase in hardness and tensile properties and a decrease of impact strength as compared to PP.     

Columnar bis(pyridinium) ionic liquid crystals derived from 4-hydroxypyridine: synthesis,mesomorphism and emission properties

A series of flexibly linked bis(pyridinium) salts with various counterions (Br^?, PF₆^?, BF₄^? and OTf-) was designed and prepared starting from corresponding N-alkylated 4-pyridones precursors with mesogenic 3,4,5-tris(alkyloxy)benzyl moieties (alkyl = dodecyl or tetradecyl). These salts were investigated for their liquid crystalline properties by a combination of differential scanning calorimetry, polarising optical microscopy and temperature-dependent powder X-ray diffraction (XRD). Their thermal stability was checked by thermogravimetric analysis. All bis(pyridinium) salts, except the triflate salt with shorter terminal carbon chain, display an enantiotropic liquid crystalline behaviour with a hexagonal columnar (Col_h) phase assigned on the basis of its characteristic texture and XRD studies. It was found that these luminescent bis(pyridinium) salts show weak emission in dichloromethane solutions at room temperature and a pronounced red-shifted emission in solid state. The emission properties of these bis(pyridinium) salts do not depend significantly on the nature of counterion employed.     

Overview of Hybrid Nanofluids Development and Benefits

Conventional fluids have poor heat transfer properties, but their vast applications in power generation, chemical processes, heating and cooling processes, electronics and other microsized applications make the reprocessing of those thermofluids to have better heat transfer properties quite essential. Recently, it has been shown that the addition of solid nanoparticles to various fluids can increase the thermal conductivity and can influence the viscosity of the suspensions by tens of percent. Thermophysical properties of nanofluids were shown dependent on the particle material, shape, size, concentration, the type of the base fluid, and other additives. In spite of some inconsistency in the reported results and insufficient understanding of the mechanism of the heat transfer in nanofluids, it has been emerged as a promising heat transfer fluid. In the continuation of nanofluids research, the researchers have also tried to use hybrid nanofluid recently, which is engineered by suspending dissimilar nanoparticles either in mixture or composite form. The idea of using hybrid nanofluids is to further improve the heat transfer and pressure drop characteristics by trade-off between advantages and disadvantages of individual suspension, attributed to good aspect ratio, better thermal network and synergistic effect of nanomaterials. As a conclusion, the hybrid nanofluids containing composite nanoparticles yield significant enhancement of thermal conductivity. However, the long-term stability, production process, selection of suitable nanomaterials combination to get synergistic effect and cost of nanofluids may be major challenges behind the practical applications.     

Results from solvophobic theory applied to methylene selectivity in reversed-phase HPLC

A significant amount of work has been previously dedicated to the understanding of methylene selectivity parameter. The conventional theory applied for this understanding was mostly based on the assumption that the difference in the Gibbs free energy of transfer from the mobile phase to the stationary phase is a constant for any two compounds in a homologous series that differ by a CH₂ group. In the present study, it is shown based on solvophobic theory that this assumption is indeed correct, but it provides a theoretical justification for it. Exemplification of the results of theory was obtained using the values for methylene selectivity (α(CH₂)) measured experimentally for seven different C18 chromatographic columns including two core–shell columns and using water and either methanol or acetonitrile as an organic component. Four different homologous series of compounds were used for evaluation. The study proved the theoretical prediction that the values for α(CH₂) obtained using different homologous series of compounds are only slightly different from those obtained using the toluene–butylbenzene series. Even using different homologous series, the same type of information regarding the columns comparison, and the changes in log α(CH₂) with the solvent composition was obtained.     

Gold layers on untreated and plasma-treated substrates of quaternized polysulfones

Thin gold layers were sputtered on the quaternized polysulfones (containing different tertiary amines—N,N-dimethylethylamine and N,N-dimethyloctylamine, respectively) surfaces unmodified and modified by low-pressure and high-frequency plasma treatment. Adhesion and morphological aspects of complex structures were studied for different gold sputtering and plasma treatment times. Water contact angle, atomic force microscopy, and surface properties reveal that adhesion increases with gold sputtering and plasma treatment times. Values of the mean adhesion force between cantilever and the studied surfaces, measured from AFM investigation, were correlated with quaternized polysulfone structures, modification of hydrophobicity after plasma treatment, and gold deposition on polymer surfaces.     

Affinity capillary electrophoresis to evaluate the complex formation between poliovirus and nanobodies

It was demonstrated that nanobodies with an in vitro neutralizing activity against poliovirus type 1 interact with native virions. Here, the use of capillary electrophoresis was investigated as an alternative technique for the evaluation of the formation of nanobody–poliovirus complexes, and therefore predicting the in vitro neutralizing activity of the nanobodies. The macromolecules are preincubated offline in a specific nanobody‐to‐virus ratio and analyzed by capillary electrophoresis with UV detection. At low nanobody‐to‐virus ratios, a clear shift in migration time of the viral peak was observed. A broad peak was obtained, indicating the presence of a heterogeneous population of nanobody–virion complexes, caused by the binding of different numbers of nanobodies to the virus particle. At elevated nanobody‐to‐virus ratios, a cluster of peaks appeared, showing an additional increase in migration times. It was shown that, at these high molar excesses, aggregates were formed. The developed capillary electrophoresis method can be used as a rapid, qualitative screening for the affinity between poliovirus and nanobodies, based on a clearly visible and measurable shift in migration time. The advantages of this technique include that there is no need for antigen immobilization as in enzyme‐linked immunosorbent assays or surface plasmon resonance for the use of radiolabeled virus or for the performance of labor‐ and time‐intensive plaque‐forming neutralization assays.