Sol–Gel SiO2-ZrO2 Coatings for Optical Applications

SiO₂-ZrO₂ based nanostructured multilayers films have been prepared by sol–gel processing from metallorganic precursors by low temperature inorganic polymerization reactions. Simultaneous gelation of both precursors was realized. Homogeneous and transparent films were obtained at room temperature by dip- and spin-coating on glass and silicon wafer substrates. Samples with successively deposited layers (1–3 layers) and successive thermal treatments have been also studied. Each deposited layer was thermally treated for 1 h at 300°C. The coatings were characterized by XRD, spectroellipsometry (SE), UV-VIS spectroscopy and AFM methods. The influence of substrates, number of coatings and number of thermal treatments on the optical and structural properties of the films was established. The thickness of three deposited SiO₂-ZrO₂ layers is about 496 nm on glass substrates and 413 nm on the silicon wafer substrate. The films deposited on glass are more porous than those deposited on silicon. The properties of optical waveguide prepared from SiO₂-ZrO₂ layers on silicon substrates will be discussed.     

Model-based sensitivity analysis of a fluidised-bed bioreactor for mercury uptake by immobilised Pseudomonas putida cells

A model-based sensitivity analysis was performed in order to evaluate the importance of the individual operating parameters of a three-phase fluidised-bed biological reactor used for removing mercury ions from wastewater. The parameters analysed involve the immobilised biomass load (bacteria P. putida) on alginate beads, particle size, inlet flow-rate, mercury ion loads in the fed wastewater, and the solid fraction in the reactor. Predictions were generated by using pseudo-first-order, Michaelis-Menten, or pseudo-Haldane kinetic models. The results highlight the major influence of the biomass/solid load and of the liquid residence time on the reactor efficiency. Also, the resultant significant differences in the model predictions underline the importance of using a more accurate kinetic model for process design and control purposes.     

Sol–gel preparation and structural characterization of Ba2TiSi2O8 powder

Fresnoite (Ba₂TiSi₂O₈, BTS) nano-particles were successfully synthesized at a low temperature of 900?°C by a modified Pechini sol?Cgel process with starting materials of Ba(NO₃)₂, Si(OC₂H₅)₄ and Ti(OC₃H₇)₄. The structural characterization of the precursors and derived synthesized oxide powders is done by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermal analysis (TG-DTG) and electron microscopy (SEM, EDX and TEM) studies. The effect of heat-treating temperature on the crystallinity of the fresnoite was investigated. Combined the XRD data and the strong FTIR peaks assigned to Ti?CO and Si?CO vibration, indicate the formation of fresnoite phase at a temperature of 900?°C. Also the nano-crystals size distribution was studied and the main diameter of nanoparticles was about 47?nm.     

About graphene ribbons development in laser synthesized nanocarbon

The work presents preliminary studies with the goal to extend the share of long graphene ribbons in laser-synthesized carbon black. Investigations revealed the existence, as a major constituent, of graphene ribbons composed of up to 10-15 graphene layers, spaced at ∼0.35-0.37 nm and of tens of nanometres in length. The samples used to study the development of this specific structure were obtained from sensitized acetylene-based mixtures and the experiments were performed following the variation of both the experimental parameters and gas composition.     

Optimization of a high-performance liquid chromatography method for the analysis of complex polyphenol mixtures and application for sainfoin extracts (Onobrychis viciifolia)

A pentafluorophenylpropyl (PFP) stationary phase was tested for the simultaneous determination of several classes of phenolic compounds. The chromatographic results were compared with those obtained by using a bifunctional phase constituted of octadecyl and phenylpropyl bonded silica and three conventional C18 columns. The elution gradient was optimized with 5% formic acid and sodium acetate in combination with acetic acid as additives and methanol as solvents. For these evaluations, a complex phenolic extract of Onobrychis viciifolia (sainfoin) and test mixtures containing 54 standard substances including 2 simple phenolic compounds, 1 amino acid, 4 hydroxybenzoic acids (HBA), 6 hydroxycinnamic acids (HCA), 3 flavan-3-ols, 9 anthocyanins, 2 dihydroflavonols, 1 chalcone, 4 flavones, 1 isoflavone and 21 flavonols have been assayed. The perfluorinated column showed good resolution for the studied phenolic compounds which have the following elution order: HBA, HCA, flavan-3-ols, anthocyanins, dihydroflavonols, flavones, flavonols and isoflavones. Compared with other columns, it provides longer elution ranges for HBA, HCA and flavan-3-ols and increased retention times for all compound classes except anthocyanins which were similarly retained on a C18 column. Its selectivity is different from C18 and bifunctional phases. A high-performance liquid chromatography (HPLC) method with diode array detection (DAD) and post-column derivatization with p-dimethyl-aminocinnamic aldehyde (DMACA) has been validated for the analysis of individual phenolic compounds from a sainfoin plant extract (O. viciifolia).     

Electronic spectroscopy of the A1A' <-- X1A' system of CDF

To further investigate the Renner-Teller (RT) effect and barriers to linearity and dissociation in the simplest singlet carbene, we recorded fluorescence excitation spectra of bands involving the pure bending levels 2(n)(0) with n = 0-9 and the combination states 1(1)(0)2(n)(0) with n = 1-8 and 2(n)(0)3(1)(0) with n = 0-5 in the A(1)A'<-- X(1)A' system of CDF, in addition to some weak hot bands. The spectra were measured under jet-cooled conditions using a pulsed discharge source, and rotationally analyzed to yield precise values for the band origins and rotational constants; fluorescence lifetimes were also measured to probe for lifetime lengthening effects due to the RT interaction. The derived A state parameters are compared with previous results for CHF and with predictions of ab initio electronic structure theory. The approach to linearity in the A state is evidenced in a sharp increase in the A rotational constant with bending excitation, and a minimum in the vibrational intervals near 2(9). A fit of the vibrational intervals for the pure bending levels yields an A state barrier to linearity in good agreement both with that previously derived for CHF and ab initio predictions. From the spectra and lifetime measurements, the onset of extensive RT perturbations is found to occur at a higher energy than in CHF, consistent with the smaller A constant.     

Properties of manganite/ruthenate superlattices with ultrathin layers

The properties of manganite/ruthenate superlattices are reviewed with a specific focus on the manganite/ruthenate interface. La_0.7Sr_0.3MnO₃/SrRuO₃ and Pr_0.7Ca_0.3MnO₃/SrRuO₃ superlattices grow with a high crystalline perfection as illustrated in the figure to the right: at the interface the individual cation species can be clearly identified, interdiffusion is marginal. The superlattices show magnetization processes with an intricate interplay between magnetocrystalline anisotropy, size of the layer magnetization, spin confinement and interfacial antiferromagnetic interlayer coupling. There is further an unprecedented Curie temperature stabilization at room temperature values of the La_0.7Sr_0.3MnO₃ layers in the superlattices down to layer thicknesses of one unit cell. The magnetotransport properties, especially the Hall effect, indicate the existence of a quasi‐two‐dimensional hole gas at the La_0.7Sr_0.3MnO₃/SrRuO₃ interface; this is further supported by an analysis of cation displacements as determined from scanning transmission electron microscopy. The manganite/ruthenate interface might be considered as a model system for the study of interfacial reconstruction and charge transfer in a highly correlated ferromagnetic system.