Synthesis and thermal characteristics of bisimides. I

Ten structurally different bisimide resins were prepared by reacting maleic anhydride/citraconic anhydride and benzophenone tetracarboxylic dianhydride with aromatic diamines and fused aromatic structures or heterocyclic groups. The amines included were 1,5-diaminonaphthalene, 2,5-bis(p-aminophenyl)1,3,4-oxadiazole, 3,3-bis(p-aminophenyl)phthalide, 9,9-bis(p-aminophenyl)fluorene. and 10,10-bis(p-aminophenyl)anthrone. These monomers were characterized by infrared (IR). ¹H-NMR, mass spectroscopy, and elemental analysis. Thermal polymerization of these monomers was investigated by differential scanning calorimetry. Broad exothermic peaks were observed for a temperature range of 225–380°C. Temperature of exothermic peak position was influenced by the presence of substituents at the olefinic bond, and in biscitraconimides it was 40–50°C lower than in the corresponding bismaleimides. Anaerobic char yields of cured bisimide resins ranged from 44 to 64%. Oxadiazole-containing bisimides had low thermal stability. Increase in formula weight between the imide groups did not influence the char yields in a systematic manner. Graphite cloth laminates with two of these bisimide resins were fabricated and tested for a number of physical properties. Their limiting oxygen index was 70–72%.     

Modification of Poly(2, 6-dimethyl-1,4-phenylene Oxide): Phosphorylation Studies

Side chain bromination of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) was carried out by using N-bromosuccinimide followed by phosphorylation of the bromo derivative with triethyl phosphite. Optimum conditions for minimum gel formation have been established. The products have been characterized by 'H-NMR and IR studies. Thermal behavior was investigated by thermogravimetry and differential scanning calorimetry in an air nitrogen atmosphere. Phosphorylated PPO starts to lose weight at 200°C, but the char yield increases with an increase in the phosphorus content of the polymer.     

Blends of benzoxazine monomers

This article describes synthesis, characterization and properties of blends of benzoxazine (Bz) monomers, i.e., m-alkylphenyl-3,4-dihydro-2H-benzoxazine (Bz-C), 6,6′-(propane-2,2-diyl)bis(3-phenyl-3,4-dihydro-2H-benzoxazine (Bz-A) and 3-phenyl-3,4-dihydro-2H-benzoxazine-p-carboxylic acid (Bz-pA). Binary blends of Bz-C with Bz-pA, and Bz-A with Bz-pA were prepared by first synthesizing Bz-C or Bz-A followed by the addition of all the ingredients of Bz-pA. In a similar manner, ternary blends of Bz-C, Bz-A and Bz-pA were prepared by first synthesizing Bz-C and subsequent addition of all the ingredients of Bz-A and Bz-pA in one pot. The Bz monomer blends were characterized by ¹H-NMR, FTIR spectroscopy, and differential scanning calorimetry. The temperature of onset of curing (T _o), due to ring-opening polymerization of Bz was found to decrease significantly by incorporation of carboxyl groups (Bz-pA) showing thereby the catalytic effect of acid functionality. Bz polymers showed good thermal stability and incorporation of Bz-pA in blends resulted in a highly cross-linked network. The interlaminar shear strength of glass fabric reinforced composites and the lap shear strength of metal–metal joints using these resin blends was also investigated.     

Introduction of high valent Mo6+ in Prussian blue analog derived Co-layered double hydroxide nanosheets for improved water splitting

Herein, we report a facile method for synthesizing MoCo-layered double hydroxide (LDH) nanosheets employing Prussian blue analog (PBA) as the precursor. The introduction of Mo in Co-LDH modulates the electronic structure, increases the number of active sites and electrochemical surface area to improve the hydrogen evolution, oxygen evolution, and overall water splitting activity. As a result, PBA-derived Mo_0.25Co_0.75-LDH nanosheets demonstrated 10 mA cm^?2 current density at only 220 mV and 115 mV overpotentials for OER and HER, respectively. The overall water splitting was attained at 1.52 V cell voltage for 10 mA cm^?2 current density.     

Biomolecular docking,antimicrobial and cytotoxic studies on new bidentate schiff base ligand derived metal (II) complexes

Three new metal complexes [Cu(L)₂] (1), [Co(L)₂] (2) and [Zn(L)₂] (3) have been prepared by the reaction of hydrated salts of metal (II) acetate with new Schiff base ligand HL, [2‐((4‐(dimethylamino)phenylimino)methyl)‐4,6‐di‐t‐butylphenol] and characterized by different physico‐chemical analyses such as elemental analysis, single XRD, ¹H NMR, FTIR and UV–Vis spectroscopic techniques. Their biomolecular docking, antimicrobial and cytotoxicity studies have also been demonstrated. The proposed structure of Schiff base ligand HL and complex 2 are confirmed by Single crystal X‐ray crystallography study. This analysis revealed that metal (II) complexes remain in distorted tetrahedral coordination environments. The electronic properties such as HOMO and LUMO energies are carried out by gaseous phase DFT/B3LYP calculations using Gaussian 09 program. Complex 1 showed a good binding propensity to the DNA and HSA, during the assessment of docking studies. Schiff base ligand HL and its metal (II) complexes, 1–3 screened for their in vitro antimicrobial activities using the disc diffusion method against selected microbes. Complex 1 shows higher antimicrobial activity than complexes 2, 3 and Schiff base ligand HL. According to the results obtained from the cytotoxic studies, Schiff base ligand HL and its metal (II) complexes 1–3 have better cytotoxicity against MCF‐7 cell lines with potency higher than the currently used chemotherapeutic agent cyclophosphamide.     

Copolymerization of 2-Hydroxyethyl Methacrylate with Alkyl Methacrylates. Part IV. Mechanical Properties and Biocompatibility

Mechanical properties of copolymers of 2-hydroxyethyl methacrylate with methyl methacrylate, ethyl methacrylate, and n-butyl methacrylate have been investigated using an Instron tensile tester. It was observed that the overall mechanical properties decrease as the ester alkyl group of alkyl methacrylate becomes bulkier. Biocompatibility of the copolymers was also investigated by implanting them subcutaneously in rats.     

A theoretical study on structural, spectroscopic and energetic properties of acetamide clusters [CH3CONH2] (n=1-15)

Insights into the formation of hydrogen bonded clusters are of outstanding importance and quantum chemical calculations play a pivotal role in achieving this understanding. Structure and energetic comparison of linear, circular and standard forms of (acetamide)(n) clusters (n = 1-15) at the B3LYP/D95** level of theory including empirical dispersion correction reveals significant cooperativity of hydrogen bonding and size dependent structural preference. A substantial amount of impact of BSSE is observed in these calculations as the cluster size increases irrespective of the kind of arrangement. The interaction energy per monomer increases from dimer to 15mer by 90% in the case of the circular arrangement, by 76% in the case of the linear arrangement and by 34% in the case of the standard arrangement respectively. The cooperativity in hydrogen bonding is also manifested by a regular decrease in average OH and C-N bond distances, while average C=O and N-H bond lengths increase with increasing cluster size. Atoms-In-Molecules (AIM) analysis is used to characterize the nature of hydrogen bonding between the acetamide molecules in the cluster on the basis of electron density (ρ) values obtained at the bond critical point. An analysis of N-H bond stretching frequencies as a function of the cluster size shows a marked red shift as the cluster size increases from 1 to 15.     

Redundant paths and reliability bounds in gamma networks

Multistage Interconnection Networks (MINs) are network systems providing fast and efficient communications at a reasonable cost. A gamma network is a specific class of MINs, which provides redundant paths in the system. In a gamma network, information from source nodes is transmitted through a specific set of routes to destination nodes. Reliability of an MIN is used as a measure of system’s ability to transform information from input to output devices. Due to the complexity of network configuration and availability of redundant paths, reliability bounds to estimate the exact reliability of a gamma network is proposed. A numerical example of an 8 × 8 gamma network is presented to demonstrate the accuracy of the reliability bounds. When the lower bound reliability provides sufficient assurance that the system will be operational at some specified time and closely approximates the exact reliability, then no further effort for obtaining the exact reliability expression is necessary.     

Population Genetic Structure and Marker Trait Associations Using Morphological,Phytochemical and Molecular Parameters in <Emphasis Type="Italic">Habenaria edgeworthii</Emphasis>—a Threatened Medicinal Orchid of West Himalaya,India

Habenaria edgeworthii Hook. f. ex Collett is an important terrestrial orchid used in different Ayurvedic formulations. In the present study, variations among morphological, phytochemical and molecular markers were assessed. A significant difference was observed among populations using morphological traits. Inter-simple sequence repeat (ISSR) data revealed lower genetic diversity at population level (He = 0.207) as compared to species level (He = 0.334). Analysis of molecular variance (AMOVA) indicates 74 % variation among populations and 26 % within population. Tuber extracts showed significantly (p < 0.05) higher total phenolics and flavonoids among the populations. Antioxidant activity determined by 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging, 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging and ferric reducing antioxidant power (FRAP) assays exhibited considerable antioxidant potential. Furthermore, the associations between molecular and morphological and phytochemical attributes were studied using multiple regression analysis (MRA). Several ISSR fragments were associated with some morphological and phytochemical traits. These ISSR fragments can be useful for breeding programme of the species when no other genetic information, such as linkage maps and quantitative trait loci, is available.