Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Optical rotary dispersion of nitrobenzene derivatives—IV : Absolute conformation of twisted nitrobenzen derivatives and its control through conformational transmission

The origin of Cotton effect shown by o-nitrobenzoyl esters is discussed. The Cotton effect observed for 1-(?)-methyl ester of 3-nitrophalic acid and 4-nitrohemimellitic acid (6 and 12), indicated that the favoured twisting direction of the nitrobenzene moiety is determined by the asymmetric menthyl group through the intervening carboxyl groups. This provides a new concept in conformational analysis of aromatic compounds. Extending the concept of conformational transmission to 2,2′-dinitrobipenhyl derivatives with known ab twisted nitrobenzene was related to the sign of the Cotton effect at 330 nm in accordance with the result of X-ray crystal analysis 1-(?)-menthyl 4-bromo-2-nitrobenzoate (1)     

Experimental determination of ionization potentials of tetraphenylporphine and metallotetraphenylporphines

Gas-phase ionization potentials of tetraphenylporphine and some metallotetraphenylporphines have been determined by the method of photocurrent measurements in nonpolar solvents reported previously [1]. The values obtained range from 5.9 to 6.3 eV, depending on the central metal ion, correlating well with the reported polarographic oxidation potentials. It has been concluded that photoelectron ejection from these complexes in isooctane occurs from the porphyrin π-system in all cases including Co(II) tetraphenylporphine, in which the electron is thought to be removed from the metal in polar solvents.     

Stability of a novel hexapeptide, (Me)Arg-Lys-Pro-Trp-tert-Leu-Leu-OEt, with neurotensin activity, in aqueous solution and in the solid state

The stability and some physicochemical properties of a novel hexapeptide, (Me)Arg-Lys-Pro-Trp-tert-Leu-Leu-OEt (I), with neurotensin activity, were investigated. The degradation of I in aqueous solution was observed as a pseudo-first order reaction. By determining the degradation rate of I at various pH values, it was found that I was most stable at around pH 4. The activation energies of the degradation in aqueous solutions at pH 2.2, 6.1, 7.0 and 8.0 were 16.3, 22.2, 23.9 and 24.2 kcal/mol, respectively. The enzymatic hydrolysis of I was studied in vitro with a porcine liver esterase at 37 degrees C. The degradation of I in this system was observed as a pseudo-first order reaction. The degradation rate of I in the presence of the esterase was about 10000 times larger than the rate in a buffer solution. I in the solid state was stable under 65 degrees C and labilized by strong light and/or high humidity. The pKa1, pKa2 and pKa3 of I were 7.1, 10.0 and 11.3, respectively. The partition coefficients between n-octanol and the buffer solution at pH values ranging from 2 to 11 were measured. The partition coefficient increased with the increase of the pH value. But the value at pH 7.0 was 2.10 x 10(-2), which was very low. The solubility of I in aqueous solution was more than 10 mg/ml. From the results of the powder X-ray diffraction pattern, I in the solid state was found to be amorphous. The dissolution rates in the 1st and 2nd fluid of JPXI at 37 degrees C and 100 rpm were 19.4 and 9.0 mg/cm2.min, respectively.     

Destructive and non-destructive determination of titanium in yttrium,niobium and tantalum oxides by photon activation

Destructive and non-destructive procedures have been developed for the determination of titanium by photon activation analysis. The non-destructive analyses with an internal standard method are performed on niobium and tantalum oxides while destructive determinations, including non-isotope addition and radiochemical separation, are applied to yttrium oxide samples.     

Aqueous phase behavior of a 1-O-phytanyl-beta-D-xyloside/water system. Glycolipid-based bicontinuous cubic phases of crystallographic space groups Pn3m and Ia3d

Temperature- and concentration-dependent aqueous phase diagram of a novel alkylglycoside, 1-O-phytanyl-beta-D-xyloside (beta-Xyl(Phyt)), was studied using small-angle X-ray scattering, polarizing optical microscopy, and differential scanning calorimetry. The phases found in this system include an Lc phase, an Lalpha phase, an HII phase, two inverted cubic phases of crystallographic space groups Pn3m and Ia3d, and a fluid isotropic phase, FI. The phase diagram of the beta-Xyl(Phyt)/water system is similar to that for the 1-monooleylglycerol (MO)/water system, suggesting that the phase behavior is largely determined by the overall molecular shape rather than the details of surfactant molecular structure. Moreover, the structural parameters of the beta-Xyl(Phyt) liquid crystals are also similar to those of the MO/water, due primarily to the similar molecular dimensions of two molecules. As compared to the MO/water system, however, the beta-Xyl(Phyt)/water system displays a lower value of TK ( approximately 8.(5) degrees C) and a wider temperature window for the mesophases (8.(5)-120 degrees C). Moreover, beta-Xyl(Phyt) is chemically more robust than MO, as the ether linkage is more stable against hydrolysis than the ester linkage and the phytanyl chain is fully saturated.     

Observation of time-dependent CP violation in B0 --> eta'K0 decays and improved measurements of CP asymmetries in B0 --> phiK0, KS0KS0KS0 and B0 --> J/psiK0 decays

We present improved measurements of CP-violation parameters in B(0) --> phiK(0), eta(')K(0), KS(0)KS(0)KS(0) decays based on a sample of 535 x 10(6) BB pairs collected at the Upsilon(4S) resonance with the Belle detector at the KEKB energy-asymmetric e(+)e(-) collider. We obtain sin2phi1(eff)=+0.64+/-0.10(stat)+/-0.04(syst) for B(0) --> eta(')K(0), +0.50+/-0.21(stat)+/-0.06(syst) for B(0) --> phiK(0), and +0.30+/-0.32(stat)+/-0.08(syst) for B(0) --> KS(0)KS(0)KS(0) decays. We have observed CP violation in the B(0) --> eta(')K(0) decay with a significance of 5.6 standard deviations. We also perform an improved measurement of CP asymmetries in B(0) --> J/psiK(0) decays and obtain sin2phi1=+0.642+/-0.031(stat)+/-0.017(syst).