Automated chemical separations in routine activation analysis

In recent years increased information is required about the distribution of elements at low concentration levels in the biosphere. Neutron activation analysis can play an important role if it can supply many data at relatively low cost. As some of the concentrations are too low for determination by non-destructive techniques, equipment for chemical separations on a routine basis is necessary. For environmental studies a separation scheme has been developed successfully for arsenic, antimony, cadmium, copper, mercury, selenium and zinc. It is based on a combination of distillation and ion-exchange. Special attention is paid to the prevention of interference from bromine and sodium. Additional information about chromium, cobalt, nickel and tungsten can easily be obtained. Experience gathered with an automated instrument for fifty samples a week is described.     

The first three anisotropy constants of nickel

The technique of ferromagnetic resonance at 23 GHz has been used to determine the first three anisotropy constants of pure Ni down to 4.2K. A temperature and orientation dependent linewidth has also been observed.     

Characterizing the distribution of nonylphenol ethoxylate surfactants in water-based pressure-sensitive adhesive films using atomic-force and confocal Raman microscopy

Surfactant distributions in model pressure-sensitive adhesive (PSA) films were investigated using atomic force microscopy (AFM) and confocal Raman microscopy (CRM). The PSAs are water-based acrylics synthesized with n-butyl acrylate, vinyl acetate, and methacrylic acid and two commercially available surfactants, disodium (nonylphenoxypolyethoxy)ethyl sulfosuccinate (anionic) and nonylphenoxypoly(ethyleneoxy) ethanol (nonionic). The ratio of these surfactants was varied, while the total surfactant content was held constant. AFM images demonstrate the tendency of anionic surfactant to accumulate at the film surfaces and retard latex particle coalescence. CRM, which was introduced here as a means of providing quantitative depth profiling of surfactant concentration in latex adhesive films, confirms that the anionic surfactant tends to migrate to the film interfaces. This is consistent with its greater water solubility, which causes it to be transported by convective flow during the film coalescence process. The behavior of the nonionic surfactant is consistent with its greater compatibility with the polymer, showing little enrichment at film interfaces and little lateral variability in concentration measurements made via CRM. Surfactant distributions near film interfaces determined via CRM are well fit by an exponential decay model, in which concentrations drop from their highs at interfaces to plateau values in the film bulk. It was observed that decay constants are larger at the film-air interface compared with those obtained at the film-substrate side indicating differences in the mechanism involved. In general, it is shown here that CRM acts as a powerful compliment to AFM in characterizing the distribution of surfactant species in PSA film formation.     

Function of nuclear analytical techniques in interuniversity research cooperation

This article describes how research planning may lead to a situation where a basis is provided for the cooperation between a limited group of personel guided by a devotion towards the possibilities and on awareness of the limitations of the nuclear reactor for analytical purposes and research groups in various sciences such as chemistry, biology, medicine, agriculture, geology and archeology. Attention is paid to neutron activation analysis, the use of radioisotope tracers and to the specific requirements set for them by workers in the above mentioned fields.