Polymerization of 1,3‐dienes with functional groups. III. Free‐radical polymerization of N,N‐diethyl‐2‐methylene‐3‐butenamide

Free‐radical homo‐ and copolymerization behavior of N,N‐diethyl‐2‐methylene‐3‐butenamide (DEA) was investigated. When the monomer was heated in bulk at 60 °C for 25 h without initiator, rubbery, solid gel was formed by the thermal polymerization. No such reaction was observed when the polymerization was carried out in 2 mol/L of benzene solution with with 1 mol % of azobisisobutyronitrile (AIBN) as an initiator. The polymerization rate (R_p) equation was R_p ∝ [DEA]^1.1[AIBN]^0.51, and the overall activation energy of polymerization was calculated 84.1 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure where both 1,4‐E and 1,4‐Z structures were included. From the product analysis of the telomerization with tert‐butylmercaptan as a telogen, the modes of monomer addition were estimated to be both 1,4‐ and 4,1‐addition. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were also carried out in benzene solution at 60 °C. In the copolymerization with styrene, the monomer reactivity ratios obtained were r₁ = 5.83 and r₂ = 0.05, and the Q and e values were Q = 8.4 and e = 0.33, respectively. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 999–1007, 2004     

Distributions of major-to-ultratrace elements among the particulate and dissolved fractions in natural water as studied by ICP-AES and ICP-MS after sequential fractionation.

In order to elucidate the distributions of the elements among the particulate and dissolved fractions in pond water, major-to-ultratrace elements in different sizes of particles as well as in the filtrate passed through the 0.05 microm filter were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The different sizes of particle samples (ca. 100-300 microg each) were collected on the membrane filters with pore sizes of 10, 3.0, 1.2, 0.4, 0.2 and 0.05 microm, respectively, by sequential fractionation. As a result, about 40 elements in different sizes of particles could be determined by ICP-AES and ICP-MS, after acid digestion using HNO3/HF/HClO4. Then, the fractional distribution factors of major-to-ultratrace elements among the particulate and dissolved fractions were estimated from the analytical results. The total contents of Al, Fe, Ti, REEs (rare earth elements), Bi, Pb and Ag in the particulate fractions (larger than 0.05 microm) were more than 80-90%, while those of Ca, Sr, Cs, W, Ba, Mn and Co in the dissolved fraction, which corresponded to the filtrate passed through the 0.05 microm membrane filter, were more than 80%. It was further found that the fractional distributions of Cu and Zn in the dissolved fraction were ca. 50%. In addition, the enrichment factors (EFs) of the elements in the particulate fractions with particle sizes of 3.0-10 microm and 0.05-0.2 microm were estimated to elucidate their geochemical characteristics in natural water.     

A simple and sensitive method for the determination of hydroxylamine in fresh-water samples using hypochlorite followed by gas chromatography.

A new and simple method for the determination of hydroxylamine in environmental water, such as fresh rivers and lakes using hypochlorite, followed by its gas choromatographic detection, has been developed. A glass vial filled with sample water was sealed by a butyl-rubber stopper and aluminum cap without head-space, and then sodium hypochlorite solution was injected into the vial through a syringe to convert hydroxylamine to nitrous oxide. The head-space in the glass vial was prepared with 99.9% grade N2 using a gas-tight syringe. After the glass vial was shaken for a few minutes, nitrous oxide in the gas-phase was measured by a gas chromatograph with an electron-capture detector. The dissolved nitrous oxide in the liquid-phase was calculated according to the solubility formula. The proposed method was applied to the analysis of fresh-water samples taken from Iu river and Hii river, flowing into brackish Lakes Nakaumi and Shinji, respectively.     

Enhancement effect of iron addition for the decomposition of organic mercury as studied by continuous flow analysis with cold vapor atomic absorption spectrometric detection

Summary A continuous flow analysis is described for the determination of total mercury by cold vapor atomic absorption spectrometry. Organic mercury compounds such as methylmercury(II) chloride, ethylmercury(II) chloride and phenylmercury(II) chloride were decomposed by potassium peroxodisulphate with addition of ferric chloride as catalytic reagent. The reducing reagent used was tin(II) chloride in sodium hydroxide solution. With 1,000 mg Fe/l added in the decomposition process, we found that methylmercury(II) chloride and ethylmercury(II) chloride gave response signals similar to those of mercury(II) chloride. The proposed method was applied to the analysis of total mercury in waste water. Permanent address: Department of Chemistry, Faculty of Mathematics and Natural Sciences, Andalas University, Padang, West Sumatra, Indonesia     

Major-to-ultratrace elements in bone-marrow fluid as determined by ICP-AES and ICP-MS.

The major-to-ultratrace elements in human bone-marrow fluid were determined by ICP-AES (inductively coupled plasma atomic emission spectrometry), and ICP-MS (inductively coupled plasma mass spectrometry). The bone-marrow fluid sample was centrifuged prior to acid digestion to exclude the bone piece from bone marrow, and then digested with nitric acid. As a result, 20 elements could be determined over the concentration range from 1610 microg g(-1) for Na to 0.00043 microg g(-1) for W. It was found that Fe, Zn and Sb were enriched by ca. 264-, 7- and 15-fold, respectively, in bone-marrow fluid, compared to those in human blood serum. Alkali metals (K, Rb, Cs), except for Na, were also significantly enriched in bone-marrow fluid. Furthermore, the concentrations of various elements, such as Fe, P, Al, Zn, Cu, Se, Zr, Sn, Ag and W, were significantly higher than those in open seawater.     

Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7): a structure with tunable density of Na(+) vacancies

A series of samples with the composition Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7) (0 < x < or = 1) was investigated and a hexagonal structure with unusually large range of homogeneity (at least from x = 0.01 to 0.95) was revealed. The hexagonal phase consists of [Al(2)B(2)O(7)](infinity)(2)(-) lamellae stacked along the c axis, as in CaAl(2)B(2)O(7) and Na(2)Al(2)B(2)O(7). Nevertheless, the configuration and stacking sequence of the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae are different in these three structures. In the hexagonal structure of Ca(1)(-)(x)()Na(2)(x)()Al(2)B(2)O(7), Ca and half Na cations (Na1) statistically occupy the same crystallographic site which is located between the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae, the other half Na cations (Na2) distribute in the planes bisecting the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae. Depending on the composition, the site occupation factor of Na2 site can vary in the same range as x, leading to a tunable density of Na(+) vacancies in the structure. The AlO(4) tetrahedra and BO(3) triangles in the structure tilt in appropriate ways to improve the bond valence sum of Na2 cations which are not sufficiently bonded to the anions.     

Chemometric Analysis of Urinary Volatile Organic Compounds to Monitor the Efficacy of Pitavastatin Treatments on Mammary Tumor Progression over Time

Volatile organic compounds (VOCs) in urine are potential biomarkers of breast cancer. Previously, our group has investigated breast cancer through analysis of VOCs in mouse urine and identified a panel of VOCs with the ability to monitor tumor progression. However, an unanswered question is whether VOCs can be exploited similarly to monitor the efficacy of antitumor treatments over time. Herein, subsets of tumor-bearing mice were treated with pitavastatin at high (8 mg/kg) and low (4 mg/kg) concentrations, and urine was analyzed through solid-phase microextraction (SPME) coupled with gas chromatography-mass spectrometry (GC-MS). Previous investigations using X-ray and micro-CT analysis indicated pitavastatin administered at 8 mg/kg had a protective effect against mammary tumors, whereas 4 mg/kg treatments did not inhibit tumor-induced damage. VOCs from mice treated with pitavastatin were compared to the previously analyzed healthy controls and tumor-bearing mice using chemometric analyses, which revealed that mice treated with pitavastatin at high concentrations were significantly different than tumor-bearing untreated mice in the direction of healthy controls. Mice treated with low concentrations demonstrated significant differences relative to healthy controls and were reflective of tumor-bearing untreated mice. These results show that urinary VOCs can accurately and noninvasively predict the efficacy of pitavastatin treatments over time.     

Origin of low melting point of ionic liquids: dominant role of entropy

Ionic liquids (ILs) are salts with an extremely low melting point. Substantial efforts have been made to address their low melting point from the enthalpic standpoint (i.e. interionic interactions). However, this question is still open. In this study, we report our findings that entropic (large fusion entropy), rather than enthalpic, contributions are primarily responsible for lowering the melting point in many cases, based on a large thermodynamic dataset. We have established a computational protocol using molecular dynamics simulations to decompose fusion entropy into kinetic (translational, rotational, and intramolecular vibrational) and structural (conformational and configurational) terms and successfully applied this approach for two representatives of ILs and NaCl. It is revealed that large structural contribution, particularly configurational entropy in the liquid state, plays a deterministic role in the large fusion entropy and consequently the low melting point of the ILs.

Large structural entropy makes salts liquid at room temperature.     

Charge density dependence of solution and gel behaviors of maleic acid-containing polyelectrolytes

Two kinds of polyelectrolytes containing maleic acid component (MA copolymers), i.e., poly(styrene-alt-maleic acid) (PSMA) and poly(vinyl methyl ether-alt-maleic acid) (PVMEMA), were investigated on their polymer chain dimensional changes in solution, and also in gel phase for the latter, as a function of the polymer charge density or pH of the (immersing) solution. Being different from common poly(carboxylic acid)s such as poly(acrylic acid), both of the MA copolymers showed maximum in the reduced viscosity or the gel size with increasing the charge density or the solution pH. The maximum in the reduced viscosity was much more significant for PSMA than PVMEMA. To see if intramolecular hydrogen bond between a pair of dissociated and undissociated carboxyl groups in an MA residue contributes to the emergence of the peak or not, similar measurements were performed also in the presence of concentrated urea (5 M). Almost the same values were obtained up to the peak position for the reduced viscosity and the gel swelling degree with increasing pH of the (immersing) solutions, which strongly suggested that the supposed effect is negligible, if any. All the results including those for PVMEMA system were interpreted in terms of the ionomer-like conformational change (ion cluster formation) of polyelectrolytes that has been often observed when the polymer charges are in rather less polar circumstances.