Differential scanning calorimetry and thermogravimetric analysis investigation of the thermal properties and degradation of some radiation‐grafted films and membranes

The influence of irradiation and grafting on the crystallinity of three base polymers has been investigated with differential scanning calorimetry. Grafting has the largest effect on the base polymer crystallinity and results in a reduction of the crystallinity. The thermal degradation of the base polymers and grafted films has been investigated with thermogravimetric analysis. The extent of the fluorination of the base polymer, the irradiation method, and the graft level all influence the thermal degradation and its activation energy. It is proposed that the variation of the chain lengths of the grafted polystyrene chains is actually a primary underlying factor responsible for the influence of these various parameters on the degradation process. The first results of a comparative thermal analysis of some fuel‐cell membranes are also presented, and the promise and shortcomings of this method are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2612–2624, 2004     

On the Causes and Effects of Contaminations during rf Diode Deposition of Cr-Si Alloys

Investigations to the causes and effects of contaminants at the rf diode deposition of CrSi films in a non-heated high vacuum apparatus were carried out comparing an oxygen-free fusion target with an oxygen-containing cermet target. The films of the fusion target contained considerable amounts of oxygen; analogously the oxygen concentration in the films was increased in the case of the cermet target. Moreover, hydrogen was found. The concentration of the contaminants decreased with the sputtering power, however the rate of incorporation increased. For high sputtering rates the contamination process was reproducible and independent of the plant conditioning; the deposited films were depth-homogeneous. The reasons for this behaviour lie in water sources which are activated first of all by the discharge itself. The electrical properties found are explained by the contaminants and the deposition conditions.     

Thermally stimulated current and DSC studies of the broadened glass transition in liquid crystalline polymers

The high sensitivity of the thermally stimulated current, thermal sampling (TS) method is emphasized in a study of the breadth of the glass transition in several liquid-crystalline polymers (LCPs). Differential scanning calorimetry (DSC) was performed on all samples to further quantify the glass transition regions. For “random” copolyester LCPs with widely varying degrees of crystallinity, including highly amorphous samples, very broad glass tran-sition regions were observed. One semicrystalline alternating copolyester and a series of semicrystalline azomethine LCPs were studied as examples of structurally regular polymers. These exhibited relatively sharp glass transitions more comparable to ordinary isotropic amorphous or semicrystalline polymers. The broad glass transitions in the random copolyesters are attributed to structural heterogeneity of the chains. In one example of a moderate-crystallinity random copolyester LCP (Vectra), glass transitions ranging up to ca. 150°C in breadth were determined by the thermal sampling (TS) method and DSC. In other lower crystallinity copolyester LCPs, the main glass transition temperature as determined by DSC was comparable to that determined by TSC although cooperative relaxations of a minor fraction of the overall relaxing species were detected well below the main T_g, by the TS method and not by DSC. Rapid quenches from the isotropic melt to an isotropic glass were possible with one LCP. The anisotropic and isotropic glassy states for this LCP were found to have the same breadth of the glass transition as was determined by the TS method, although TSC and DSC show that T_g is shifted downward by ca. 15°C in the anisotropic glass as compared to the isotropic glass. © 1993 John Wiley & Sons, Inc.     

NMR.-Investigation of the Formaldehyde Addition and Oligomerisation Equilibria in the System Formaldehyde/Water/Acetic Acid/Hydrochloric Acid

An NMR. investigation of the state of formaldehyde in acidic solutions has been carried out. Solutions of DCl/D₂O/CD₃COOD containing two sources of formaldehyde, i.e. paraformaldehyde (I) and trioxane (II), were used for this purpose. In systems I and II the effect of various D₂O/CD₃COOD ratios, at a constant DCl concentration, was studied, while for II the effect of changing DCl concentration was also investigated. The results show that in aqueous solution, formaldehyde exists primarily as the monomeric and linear oligomeric forms of methylene glycol. Reducing the amount of D₂O (at constant DCl concentration), while increasing the CD₃COOD content, results in an increase in the polymeric species and in trioxane. In addition, substitution of water by acetic acid results in systems that are catalytically more active than aqueous solutions of the same hydrochloric acid concentration. Along with the usual polymer-monomer equilibria which exist in such solutions, side reactions of methylene glycol with the hydrochloric acid present also occur to a small extent, e.g. acetylation, substitution of OH by Cl and the Cannizzaro reaction. It is suggested that these findings will result in a better understanding of the formaldehyde crosslinking reactions in cotton cellulose.     

Interspike interval embedding of chaotic signals

According to a theorem of Takens [Lecture Notes in Mathematics (Springer-Verlag, Berlin, 1981), Vol. 898], dynamical state information can be reproduced from a time series of amplitude measurements. In this paper we investigate whether the same information can be reproduced from interspike interval (ISI) measurements. Assuming an integrate-and-fire model coupling the dynamical system to the spike train, there is a one-to-one correspondence between the system states and interspike interval vectors of sufficiently large dimension. The correspondence implies in particular that a data series of interspike intervals, formed in this manner, can be forecast from past history. This capability is demonstrated using a nonlinear prediction algorithm, and is found to be robust to noise. A set of interspike intervals measured from a simple neuronal circuit is studied for deterministic structure using a prediction error statistic. (c) 1995 American Institute of Physics.