Multi-wavelength Brillouin fiber laser generation using dual-pass approach

A simple and compact multi-wavelength tunable Brillouin fiber laser (BFL) in conjunction with dual-pass approach is proposed and experimentally compared with the output of a conventional single ring cavity architecture. This BFL source is demonstrated using 10 km long non-zero dispersion shifted fiber (NZ-DSF) as a Brillouin gain medium. By single ring cavity configuration, odd-order Brillouin Stokes lines appear in the backward direction with the line spacing 0.16 nm (∼20 GHz) between each two consecutive waves. However, this single ring cavity in conjunction with dual-pass configuration is able to generate Brillouin Stokes lines with 0.08 nm spacing by providing bi-directional oscillations of Brillouin waves in both forward and backward directions. With a Brillouin pump power of 15.3 dBm, approximately up to 17 Brillouin Stokes lines are generated which is tunable over 40 nm tuning range.     

Tunable high power fiber laser using an AWG as the tuning element

In this paper, a design of a High Power Tunable Fiber Laser (HP-TFL) in C-band region from 1536.7 to 1548.6 nm is set forth with Erbium Doped Fibers (EDFs) being used as a seeding signal and a booster amplifier. With a 1 × 16 channels Arrayed Waveguide Grating (AWG), this setup is capable of generating 16 different wavelengths with an average output power of 20.7 dBm.     

Graphene-based Q-switched pulsed fiber laser in a linear configuration

A pulsed laser system is realized with graphene employed as a Q-switch.The graphene is exfoliated from its solution using an optical deposition and the optical tweezer effect.A fiber ferrule that already has the graphene deposited on it is inserted into an erbium-ytterbium laser(EYL)system with linear cavity configuration.We successfully demonstrate a pulsed EYL with a pulse duration of approximately 5.9μs and a repetition rate of 20.0 kHz.     

Switchable Q-switched and laser operating mode-locked erbium-doped fiber in the L-band region

We demonstrate a switchable Q-switched and mode-locked erbium-doped fiber laser （EDFL） operating in the L-band region using the nonlinear polarization rotation effect. The switching operation is achieved by controlling intensity-dependent loss using a polarization controller. In Q-switching mode, the EDFL produces a pulse train with a repetition rate of 21.1 kHz, pulse width of 7.7 #s, and pulse energy of 13.6 nJ. The EDFL also generates a multi-wavelength comb with a very narrow and constant wavelength spacing of 0.045 nm and optical signal-to-noise ratio of at least l0 dB. During mode locking, the EDFL produces stretched pulses with 3-dB bandwidth of 26.2 nm, pulse width of 350 fs, repetition rate of 2.38 MHz, and pulse energy of 48.56 pJ.     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

Low noise double pass L-band erbium-doped fiber amplifier

A new double pass long wavelength band erbium-doped fiber amplifier with enhanced noise figure characteristics is demonstrated. The noise figure is improved by about 2.6 dB with the incorporation of broadband conventional-band fiber Bragg grating (FBG) in between the two segments of erbium-doped fiber. By incorporating both the pre-amplifier and the FBG, the noise figure is further improved, which varies from 4.0 to 5.0 dB in the flat gain region from 1570 to 1600 nm. The gain varies from 32.0 to 33.4 dB within this region. The new amplifier with high gain and low noise figure can be useful as an inline amplifier in a wavelength division multiplexing transmission system.     

Mode-Locked Erbium-Doped Fiber Laser Using Vanadium Oxide as Saturable Absorber

A mode-locked erbium doped fiber laser(EDFL) is demonstrated using the vanadium oxide(V_2O_5) material as a saturable absorber(SA). The V_2O_5 based SA is hosted into poly ethylene oxide film and attached on fiber ferule in the laser cavity. It shows 7% modulation depth with 71 MW/cm~2 saturation intensity. By incorporating the SA inside the EDFL cavity with managed intra-cavity dispersion, ultrashort soliton pulses are successfully generated with a full width at half maximum of 3.14 ps. The laser operated at central wavelength of 1559.25 nm and repetition frequency of 1 MHz.     

Highly efficient and high output power of erbium doped fiber laser in a linear cavity configuration

A simple Erbium Doped Fiber Laser (EDFL) in linear cavity configuration is reported. The cavity design is based on an FBG as a back reflector, and a loop back optical circulator with an output coupler as the front reflector. Different coupling ratios of the coupler are tested and 50: 50 provides the highest coupling output power of 22.06 dBm (160.7 mW). The pump power conversion efficiency is about 95% when pumping with two pump lasers at 1460 and 1490 nm with combined pumping power of 545 mW. The laser output has a measured linewidth of 0.0179 nm.     

A Supported Bismuth Halide Perovskite Photocatalyst for Selective Aliphatic and Aromatic C–H Bond Activation

Direct selective oxidation of hydrocarbons to oxygenates by O₂ is challenging. Catalysts are limited by the low activity and narrow application scope, and the main focus is on active C−H bonds at benzylic positions. In this work, stable, lead-free, Cs₃Bi₂Br₉ halide perovskites are integrated within the pore channels of mesoporous SBA-15 silica and demonstrate their photocatalytic potentials for C−H bond activation. The composite photocatalysts can effectively oxidize hydrocarbons (C₅ to C₁₆ including aromatic and aliphatic alkanes) with a conversion rate up to 32900 μmol g_cat⁻¹ h⁻¹ and excellent selectivity (>99 %) towards aldehydes and ketones under visible-light irradiation. Isotopic labeling, in situ spectroscopic studies, and DFT calculations reveal that well-dispersed small perovskite nanoparticles (2–5 nm) possess enhanced electron–hole separation and a close contact with hydrocarbons that facilitates C(sp³)−H bond activation by photoinduced charges.     

Catalytic Activity and Morphological Properties of Ni/MgO Catalysts for the Oxidative Coupling of Methane

The catalytic activity of Ni/MgO catalysts was studied for the oxidative coupling of methane (OCM). The catalysts were characterized using transmission electron microscope (TEM) and XRD. The increase in C2+ selectivity of Ni/MgO was attributed to the presence of bulk dislocations and MgNiO₂ phase. This revised version was published online in June 2006 with corrections to the Cover Date.