Validation of a thermal decomposition mechanism of formaldehyde by detection of CH2O and HCO behind shock waves

The thermal decomposition of formaldehyde was investigated behind shock waves at temperatures between 1675 and 2080 K. Quantitative concentration time profiles of formaldehyde and formyl radicals were measured by means of sensitive 174 nm VUV absorption (CH₂O) and 614 nm FM spectroscopy (HCO), respectively. The rate constant of the radical forming channel (1a), CH₂O + M → HCO + H + M, of the unimolecular decomposition of formaldehyde in argon was measured at temperatures from 1675 to 2080 K at an average total pressure of 1.2 bar, k_1a = 5.0 × 10¹⁵ exp(‐308 kJ mol^?1/RT) cm³ mol^?1 s^?1. The pressure dependence, the rate of the competing molecular channel (1b), CH₂O + M → H₂ + CO + M, and the branching fraction β = k_1a/(kA_1a + k_1b) was characterized by a two‐channel RRKM/master equation analysis. With channel (1b) being the main channel at low pressures, the branching fraction was found to switch from channel (1b) to channel (1a) at moderate pressures of 1–50 bar. Taking advantage of the results of two preceding publications, a decomposition mechanism with six reactions is recommended, which was validated by measured formyl radical profiles and numerous literature experimental observations. The mechanism is capable of a reliable prediction of almost all formaldehyde pyrolysis literature data, including CH₂O, CO, and H atom measurements at temperatures of 1200–3200 K, with mixtures of 7 ppm to 5% formaldehyde, and pressures up to 15 bar. Some evidence was found for a self‐reaction of two CH₂O molecules. At high initial CH₂O mole fractions the reverse of reaction (6), CH₂OH + HCO ? CH₂O + CH₂O becomes noticeable. The rate of the forward reaction was roughly measured to be k₆ = 1.5 × 10¹³ cm³ mol^?1 s^?1. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 157–169 2004     

Capture-ROMP-release: application to the synthesis of amines and alkyl hydrazines

Application of a capture-ROMP-release strategy for the chromatography-free purification of Mitsunobu reaction products is described. Norbornenyl-tagged reagents are utilized for standard solution phase Mitsunobu chemistry. Post-reaction phase-switching is accomplished via in situ ring-opening metathesis polymerization (ROMP) followed by precipitation of the polymer with methanol. Release of the product from the polymer affords amines and alkyl hydrazine derivatives with good yields and purities.     

Chromatographic speciation of anionic and neutral selenium compounds in Se-accumulating Brassica juncea (Indian mustard) and in selenized yeast

Selenium-accumulating plants such as Brassica juncea (Indian mustard) concentrate the element in plant shoots and roots. Such behavior may provide a cost-effective technology to clean up contaminated soils and waters that pose major environmental and human health problems (phytoremediation). Such ability to transform selenium into bioactive compounds has important implications for human nutrition and health. Element selective characterization of B. juncea grown in the presence of inorganic selenium under hydroponic conditions provides valuable information to better understand selenium metabolism in plants. The present work determines both previously observed organoselenium species such as selenomethionine and Se-methylselenocysteine and for the first time detects the newly characterized S-(methylseleno)cysteine in plant shoots and roots when grown in the presence of selenate or selenite as the only selenium source. A key feature of this study is the complementary role of selenium and sulfur specific chromatographic detection by HPLC with interfaced inductively coupled plasma mass spectrometry (ICP-MS) detection and by derivatization GC with interfaced atomic spectral emission. HPLC-ICP-MS limits of detection for such species were in the range 5-50 ng Se mL(-1) in the injected extracts. Speciation profiles are compared with those of selenium-enriched yeast by both HPLC-ICP-MS and GC-AED.     

A structure determination protocol based on combined analysis of 3D-ED data,powder XRD data,solid-state NMR data and DFT-D calculations reveals the structure of a new polymorph of l-tyrosine

We report the crystal structure of a new polymorph of l-tyrosine (denoted the β polymorph), prepared by crystallization from the gas phase following vacuum sublimation. Structure determination was carried out by combined analysis of three-dimensional electron diffraction (3D-ED) data and powder X-ray diffraction (XRD) data. Specifically, 3D-ED data were required for reliable unit cell determination and space group assignment, with structure solution carried out independently from both 3D-ED data and powder XRD data, using the direct-space strategy for structure solution implemented using a genetic algorithm. Structure refinement was carried out both from powder XRD data, using the Rietveld profile refinement technique, and from 3D-ED data. The final refined structure was validated both by periodic DFT-D calculations, which confirm that the structure corresponds to an energy minimum on the energy landscape, and by the fact that the values of isotropic ¹³C NMR chemical shifts calculated for the crystal structure using DFT-D methodology are in good agreement with the experimental high-resolution solid-state ¹³C NMR spectrum. Based on DFT-D calculations using the PBE0-MBD method, the β polymorph is meta-stable with respect to the previously reported crystal structure of l-tyrosine (now denoted the α polymorph). Crystal structure prediction calculations using the AIRSS approach suggest that there are three other plausible crystalline polymorphs of l-tyrosine, with higher energy than the α and β polymorphs.

A new polymorph of l-tyrosine is reported, with the crystal structure determined by combined analysis of 3D-ED data and powder XRD data, augmented by information from periodic DFT-D calculations and solid-state ¹³C NMR data.     

IR laser absorption diagnostic for C2H4 in shock tube kinetics studies

An IR laser absorption diagnostic has been further developed for accurate and sensitive time‐resolved measurements of ethylene in shock tube kinetic experiments. The diagnostic utilizes the P14 line of a tunable CO₂ gas laser at 10.532 μm (the (0 0 1) → (1 0 0) vibrational band) and achieves improved signal‐to‐noise ratio by using IR photovoltaic detectors and accurate identification of the P14 line via an MIR wavemeter. Ethylene absorption cross sections were measured over 643–1959 K and 0.3–18.6 atm behind both incident and reflected shock waves, showing evident exponential decay with temperature. Very weak pressure dependence was observed over the pressure range of 1.2–18.6 atm. By measuring ethylene decomposition time histories at high‐temperature conditions (1519–1895 K, 2.0–2.8 atm) behind reflected shocks, the rate coefficient of the dominant elementary reaction C₂H₄ + M → C₂H₂ + H₂ + M was determined to be k₁ = (2.6 ± 0.5) × 10¹⁶exp(?34,130/T, K) cm³ mol^?1 s^?1 with low data scatter. Ethylene concentration time histories were also measured during the oxidation of 0.5% C₂H₄/O₂/Ar mixtures varying in equivalence ratio from 0.25 to 2. Initial reflected shock conditions ranged from 1267 to 1440 K and 2.95 to 3.45 atm. The measured time histories were compared to the modeled predictions of four ethylene oxidation mechanisms, showing excellent agreement with the Ranzi et al. mechanism (updated in 2011). This diagnostic scheme provides a promising tool for the study and validation of detailed hydrocarbon pyrolysis and oxidation mechanisms of fuel surrogates and realistic fuels. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 423–432, 2012     

Aerodynamic optimization of the flat-plate leading edge for experimental studies of laminar and transitional boundary layers

This work is concerned with the design of a leading edge for a flat-plate model used to study laminar and transitional boundary layers. For this study, the flow over the complete boundary-layer model, including leading edge, flat section, and trailing-edge flap, is modeled. The effect of important geometrical features of the leading edge on the resulting pressure distribution, starting from the well-known symmetric modified super ellipse, is investigated. A minimal pressure gradient on the measurement side of the plate is achieved using an asymmetrical configuration of modified super ellipses, with a thickness ratio of 7/24. An aerodynamic shape optimization is performed to obtain a novel leading edge shape that greatly reduces the length of the non-zero pressure gradient region and the adverse pressure gradient region compared to geometries defined by ellipses. Wind tunnel testing is used to validate the numerical solutions.     

Two-line planar fluorescence for temporally resolved temperature imaging in a reacting supersonic flow over a body

An instantaneous temperature imaging technique for chemically reacting, supersonic flows over bodies is described and demonstrated in a H₂/O₂/Ar shock tube flow (M=1.3, 0.7 atm, 1760K freestream). Based on a planar fluorescence measurement, the approach uses a two-line rotational population ratio to infer temperature. The measured 2-d temperature profiles qualitatively match the expected flowfield structure around the blunt body, and the temperature increase across the bow shock in a single-shot measurement agrees within 5–10% of the prediction of a 1-d shock analysis. The significant systematic error sources for the technique are detailed, and the random error effects associated with shot-noise-limited fluorescence images are statistically analyzed to identify transitions which minimize the temperature errors for instantaneous and average measurements. Even for average temperature measurements, the analysis predicts errors which can be as large as 5–10% when noisy fluorescence images are used in conjunction with low temperature sensitivity. In general, temperature errors can be reduced by increasing sensitivity, i.e., the energy separation of the two rotational levels, until the fluorescence shot-noise rises to a value of 30–50% within the temperature range of interest.     

Neural correlates of intelligibility in speech investigated with noise vocoded speech--a positron emission tomography study

Functional imaging studies of speech perception in the human brain have identified a key role for auditory association areas in the temporal lobes (bilateral superior temporal gyri and sulci) in the perceptual processing of the speech signal. This is extended to suggest some functional specialization within this bilateral system, with a particular role for the left anterior superior temporal sulcus (STS) in processing intelligible speech. In the current study, noise-vocoded speech was used to vary the intelligibility of speech parametrically. This replicated the finding of a selective response to intelligibility in speech in the left anterior superior temporal sulcus, in contrast to the posterior superior temporal sulcus, which showed a response profile insensitive to the degree of intelligibility. These results are related to theories of functional organization in the human auditory system, which have indicated that there are separate processing streams, with different functional roles, running anterior and posterior to primary auditory cortex. Specifically, it is suggested that an anterior stream processing intelligibility can be distinguished from a posterior stream associated with transient representations, important in spoken repetition and working memory.