Multicyclic polyethers derived from 1,1,1‐tris(4‐hydroxyphenyl)ethane and 2,6‐dihalopyridines

Poly(pyridine ether)s were prepared in two ways: the polycondensation of silylated 1,1,1‐tris(4‐hydroxyphenyl)ethane (THPE) with 2,6‐difluoropyridine (method A) and the polycondensation of free THPE with 2,6‐dichloropyridine (method B). With method A, the THPE/difluoropyridine feed ratio was varied from 1.0:1.0 to 1.0:1.6. Cycles, bicycles, and multicycles were the main reaction products, and crosslinking was never observed. When ideal stoichiometry was used exclusively, multicycles free of functional groups were obtained. These multicycles were detectable in matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectra up to B₃₈C₇₆ with a mass of approximately 32,000 Da. With method B, the reaction conditions were varied at a fixed feed ratio to achieve an optimum for the preparation of multicyclic polyethers, but because of the lower reactivity of 2,6‐dichloropyridine, a quantitative conversion was not achieved. The reaction products were characterized with MALDI‐TOF mass spectrometry, viscosity measurements, and size exclusion chromatography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5725–5735, 2004     

Differential scanning calorimetry and thermogravimetric analysis investigation of the thermal properties and degradation of some radiation‐grafted films and membranes

The influence of irradiation and grafting on the crystallinity of three base polymers has been investigated with differential scanning calorimetry. Grafting has the largest effect on the base polymer crystallinity and results in a reduction of the crystallinity. The thermal degradation of the base polymers and grafted films has been investigated with thermogravimetric analysis. The extent of the fluorination of the base polymer, the irradiation method, and the graft level all influence the thermal degradation and its activation energy. It is proposed that the variation of the chain lengths of the grafted polystyrene chains is actually a primary underlying factor responsible for the influence of these various parameters on the degradation process. The first results of a comparative thermal analysis of some fuel‐cell membranes are also presented, and the promise and shortcomings of this method are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2612–2624, 2004     

Quantitative electron probe microanalysis for the characterization of thin carbon-boron layers in fusion devices

Summary The first wall of the fusion device TEXTOR at the Forschungszentrum Jülich has been coated in situ with an amorphous hydrogen rich carbon/boron film (a-C/B:H) which reduces plasma impurities caused by the plasma surface interaction. The results of the coating process of the 35 m² large inner wall surface have been controlled by a recently developed modification of the quantitative electron probe microanalysis, which has been applied to 12 samples from specified positions inside the tokamak. The quantification itself is based on a Monte Carlo simulation of electron trajectories providing very accurate results for X-ray intensities emitted by elements present in the electron bombarded sample. The Monte Carlo results are used in the present work to calibrate the measured X-ray intensities emitted by boron and carbon from the a-C/B:H layers deposited on pure silicon substrates. As a result the total deposited mass of the layer per area unit as well as the composition of the layers (except hydrogen) could be determined very accurately. The relative errors were less than 7%. The limit of detectability were found to be in the range of one monolayer for boron as well as for carbon.     

Non-destructive analysis of archeological samples by energy-dispersive X-ray fluorescence

Summary A non-destructive method is described for the determination of major and minor constituents in archeological specimens by energy-dispersive X-ray fluorescence. Homogeneity tests are made by measuring at various sites of the specimen. In the same way, mean values are obtained for inhomogeneous specimen without taking samples. For calibration, powder standards are used. In case of the determination of elements with numbers up to 14 (Si) a vacuum chamber is used and the dimensions of the specimens are limited by the dimensions of that vacuum chamber, whereas for the determination of elements from K up to U specimens of any size, form or weight are suitable.

---

Zerstörungsfreie Analyse von archäologischen Proben mit Hilfe der Energie-dispersiven Röntgenfluorescenzanalyse

Zusammenfassung Eine zerstörungsfreie Methode für die Bestimmung von Haupt- und Nebenbestandteilen in archäologischen Proben mit Hilfe der Energie-dispersiven Röntgenfluorescenzanalyse wird beschrieben. Für Homogenitätstests wird an mehreren Stellen der Probe gemessen. In der gleichen Weise werden für inhomogene Proben Mittelwerte erhalten ohne Probenahme. Für die Eichung werden Pulverstandards verwendet. Im Falle der Bestimmung von Elementen mit Ordnungszahlen bis 14 (Si) wird eine Vakuumkammer eingesetzt, und die Dimensionen der Proben sind durch die Dimensionen dieser Vakuumkammer begrenzt, während für die Bestimmung der Elemente K bis U Proben jeder Größe, jeder Form oder jeden Gewichts verwendbar sind.

     

Helicoid Shiftamers for the Transport of π‐Clumps and Charges

Hypothetical helical organic polymers with localized electrons, charges, and/or atoms are described, in which these localized substructures can move along the backbones of the polymers via sigmatropic H shifts.     

Induced smectic C* phases

Induced ferroelectric S*_C phases are formed by non-chiral S_C host phases doped with chiral dipolar guest molecules. In those mixtures the spontaneous polarization P_s and the tilt angle Θ has been investigated as a function of the mole fraction x_G of the chiral dopant. In most cases the reduced polarization P₀ = P_S/ sin Θ has been found to depend linearly on x_G. The polarization power which is defined by δ_P=(∂P₀/∂x_G)ΔT is discussed in terms of the molecular structure of the chiral dopants. There are systems in which P₀(x_G) deviates positively from linearity. This behaviour can be understood by considering a local field correction to P₀. By assuming a local field of Lorentz type a theoretical relation for P₀(x_G) has been derived which explains the experimental results. The effect of a local field is considerable if the transverse dipole moment and the polarizability of the chiral dopant are large.     

Application of a digital signal processor to Fourier-transform infrared spectroscopy

Summary The application of a digital signal processor (DSP) to Fourier-transform infrared spectroscopy is described, which allows for near real-time display of the transformed interferograms as spectra.     

Sliding spark spectroscopy

Summary A new analytical radiation source combined with fiber optics linked to a diode array detection device with modified software is described. The direct-reading spectrometer simultaneously covers the wavelength range 185–510 nm with a spectral resolution of <1.5 nm. Intense optical emission is observed when positionally stable high-current surface sparks supplied by a pulse-generator with definite discharge parameters (max. 800 Ampere/pulse) are sliding over compact non-conductive materials such as plastics, glasses, quartz filters or powder pellets. Substrate vaporization, ionization and excitation processes in the surface discharge plasma channel generate emission corresponding to neutral and ionic states. The spectra are essentially composed of lines emitted by the electrode material (e.g. copper, silver), from the substrate under investigation, radiation continuum as well as structured background from the surrounding air atmosphere. Due to the occurrence of emission lines of reactive fillers, inorganic pigments and stabilizers, a rapid multi-element screening method is demonstrated. A rapid identification system (mix-up test) of PVC or fire-retardant thermoplastics within one second has been realized from the atomic emission line intensity originating from the sputtered copper electrode material according to its increased volatility in the presence of chlorine (modified Beilstein test).Puls-Plasma-Technik GmbH, Dortmund