Highly Proton-Conductive Zinc Metal-Organic Framework Based On Nickel(II) Porphyrinylphosphonate

The design of new solid-state proton-conducting materials is a great challenge for chemistry and materials science. Herein, a new anionic porphyrinylphosphonate-based MOF ( IPCE-1Ni ), which involves dimethylammonium (DMA) cations for charge compensation, is reported. As a result of its unique structure, IPCE-1Ni exhibits one of the highest value of the proton conductivity among reported proton-conducting MOF materials based on porphyrins (1.55×10⁻³ S cm⁻¹ at 75 °C and 80 % relative humidity).     

Vibrational Spectroscopic Studies on the Hofmann Type Clathrates: M(1,6-diaminohexane)Ni(CN) 4 .G (M = Co, Ni or Cd; G = chlorobenzene, 1,2-, 1,3- or 1,4-dichlorobenzene)

New Hofmann-diaminohexane(dahxn)-type clathrates of the form M(1,6-dahxn)Ni(CN)₄.G (M = Co, Ni or Cd; G = chlorobenzene, 1,2-, 1,3 or 1,4-dichlorobenzene) were prepared inpowder form and their infrared spectra are reported. The spectral data suggest that these compounds are similar in structure to those of the Hofmann-diam-type clathrates. Their structure consists of planar polymeric layers, {M–Ni(CN)₄}, formedfrom Ni(CN)₄ anions coordinated to the bridging 1,6-diaminohexane molecules bound directly to the metal (M). The M atoms are bound to four N atoms of the CN ions and, the Ni atoms are surrounded by four C atoms of the CN groups in a square-planar layer.     

New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

Rapid deposition of triangular silver nanoplates on planar surfaces: application to metal-enhanced fluorescence

A simple and rapid wet-chemical technique for the deposition of silver triangles on conventional glass substrates, which alleviates the need for lithography, has been developed. The technique is based on the seed-mediated cetyltrimethylammonium-bromide-directed growth of silver triangles on glass surfaces, where smaller spherical silver seeds that were attached to the surface were subsequently converted and grown into silver triangles in the presence of a cationic surfactant and silver ions. The size of the silver triangles was controlled by sequential immersion of silver seed-coated glass substrates into a growth solution and by the duration time of immersion. Atomic force microscopy studies revealed that the size of the silver triangles ranged between 100 and 500 nm. Interestingly, these new surfaces are a significant improvement over traditional silver island films for applications in metal-enhanced fluorescence. A routine 16-fold enhancement in emission intensity was typically observed, for protein-immobilized indocyanine green, with a relatively very low loading density of silver triangles on the glass surface.     

X-ray structure of palladium (II) complex and its catalytic activity on Suzuki–Miyaura reaction under mild conditions

Research on Chemical Intermediates - Palladium (II) complex with 4-tert-butylbenzoic hydrazide (TBBH)/triphenylphosphine (PPh3) ligands was successfully synthesized and characterized by X-ray,...     

Effect of anionic surfactant on alginate‐chitosan polyelectrolyte multilayer thickness

Alginate and chitosan are among the most common biopolyelectrolytes. Surfactants can be included in alginate and chitosan formulations in order to improve their physical and functional properties. In the present study, the effect of the anionic surfactant sodium dodecyl sulfate (SDS) on alginate‐chitosan polyelectrolyte multilayer (PEM) films is reported for the first time. Layer‐by‐layer deposition technique was employed to prepare the PEM samples and the samples were characterized by ellipsometry, X‐ray reflectivity, atomic force microscopy, and quartz crystal microbalance with dissipation. Incorporation of SDS into PEM formulations increased the film thickness and an increased adsorption behavior between alginate and chitosan layers are observed. Since the concentration of SDS was below its critical micelle concentration, no micelle formation was expected and hydrophobic‐hydrophobic interaction between alginate and SDS might be the main reason. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1798–1803     

Aliphatic Polyester/polyhedral Oligomeric Silsesquioxanes Hybrid Networks via Copper‐free 1,3‐dipolar Cycloaddition Click Reaction

In this study, we describe the preparation and characterization of a new class of thermoset hybrid networks containing aliphatic polyester and polyhedral oligomeric silsesquioxanes (POSS). The copper‐free 1,3‐dipolar cycloaddition click reaction of internal alkyne functionalized aliphatic polyester and multifunctional azido POSS with different concentrations led to highly crosslinked thermoset networks. The click reactions performed under ambient conditions (i.e., in tetrahydrofuran at room temperature for 1 day) in the absence of any catalyst. The chemical composition of hybrid networks and homogenous distribution of POSS molecules were confirmed by Fourier transform infrared spectroscopy and scanning electron microscopy with energy dispersive spectroscopy. The swelling ratios of hybrid networks were commonly decreased by increasing POSS‐N₃ content and by changing polar solvents to apolar solvents. Thermogravimetric analysis results demonstrated that the thermal stability of hybrid networks increased with higher POSS feeding ratio. Tensile tests were applied to evaluate the mechanical properties of hybrid networks. Compared to neat aliphatic polyester, the mechanical properties of hybrid networks significantly improved. For instance, the tensile strength were enhanced from 5 MPa to 19 MPa by increasing the concentration of azido functionalized POSS from 10 to 40. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2222–2227     

Visual detection of Al ions using conjugated copolymer-ATP supramolecular complex

A colorimetric Al³⁺ sensor based on fluorescence recovery of a conjugated copolymer-ATP complex is proposed. An optimized ratio of two polythiophene (PT) monomers is utilized to synthesize copolymer (CP) that yielded maximized colorimetric response for Al³⁺ in deionized (DI) and tap water. The electrostatic disassembly of CP-ATP upon addition of Al³⁺ led to an evident visual color change. The lowest concentration of Al³⁺ for naked eye observation is around 4 μM, which is below the threshold levels in drinking water according to European Economic Community (EEC) standard. Besides, the proposed assay showed a similar response to Al³⁺ in tap water. The proposed methodology showed selective and sensitive detection for Al³⁺ in analytically relevant concentration ranges without involving sophisticated instrumentation, illustrating the applicability for on-site drinking water monitoring.