Overloaded elution band profiles of ionizable compounds in reversed‐phase liquid chromatography: Influence of the competition between the neutral and the ionic species

The parameters that affect the shape of the band profiles of acido‐basic compounds under moderately overloaded conditions (sample size less than 500 nmol for a conventional column) in RPLC are discussed. Only analytes that have a single pK_a are considered. In the buffer mobile phase used for their elution, their dissociation may, under certain conditions, cause a significant pH perturbation during the passage of the band. Two consecutive injections (3.3 and 10 μL) of each one of three sample solutions (0.5, 5, and 50 mM) of ten compounds were injected on five C₁₈‐bonded packing materials, including the 5 μm Xterra‐C₁₈ (121 Å), 5 μm Gemini‐C₁₈ (110 Å), 5 μm Luna‐C₁₈(2) (93 Å), 3.5 μm Extend‐C₁₈ (80 Å), and 2.7 μm Halo‐C₁₈ (90 Å). The mobile phase was an aqueous solution of methanol buffered at a constant _W^WpH of 6, with a phosphate buffer. The total concentration of the phosphate groups was constant at 50 mM. The methanol concentration was adjusted to keep all the retention factors between 1 and 10. The compounds injected were phenol, caffeine, 3‐phenyl 1‐propanol, 2‐phenyl butyric acid, amphetamine, aniline, benzylamine, p‐toluidine, procainamidium chloride, and propranololium chloride. Depending on the relative values of the analyte pK_a and the buffer solution pH, these analytes elute as the neutral, the cationic, or the anionic species. The influence of structural parameters such as the charge, the size, and the hydrophobicity of the analytes on the shape of its overloaded band profile is discussed. Simple but general rules predict these shapes. An original adsorption model is proposed that accounts for the unusual peak shapes observed when the analyte is partially dissociated in the buffer solution during its elution.     

Separation mechanism of nortriptyline and amytriptyline in RPLC

The single and the competitive equilibrium isotherms of nortriptyline and amytriptyline were acquired by frontal analysis (FA) on the C18- bonded discovery column, using a 28/72 (v/v) mixture of acetonitrile and water buffered with phosphate (20 mM, pH 2.70). The adsorption energy distributions (AED) of each compound were calculated from the raw adsorption data. Both the fitting of the adsorption data using multi-linear regression analysis and the AEDs are consistent with a trimodal isotherm model. The single-component isotherm data fit well to the tri-Langmuir isotherm model. The extension to a competitive two-component tri-Langmuir isotherm model based on the best parameters of the single-component isotherms does not account well for the breakthrough curves nor for the overloaded band profiles measured for mixtures of nortriptyline and amytriptyline. However, it was possible to derive adjusted parameters of a competitive tri-Langmuir model based on the fitting of the adsorption data obtained for these mixtures. A very good agreement was then found between the calculated and the experimental overloaded band profiles of all the mixtures injected.     

Jet cooled NO2 intra cavity laser absorption spectroscopy (ICLAS) between 11200 and 16150 cm

We have combined the high sensitivity of the ICLAS technique with the rotational cooling effect of a slit jet expansion in order to observe and to understand the visible and near infrared NO₂ spectrum. By this way, an equivalent absorption pathlength of several kilometers through rotationally cooled molecules has been achieved. Due to the vibronic interaction between the two lowest electronic states, ²A₁ and à ²B₂, this spectrum is vibronically dense and complex. Moreover, the dense room temperature rotational structure is perturbed by additional rovibronic interactions. In contrast, the rotational analysis of our jet cooled spectrum is straightforward. The NO₂ absorption spectrum is vanishing to the IR but, owing to the high sensitivity of the ICLAS technique, we have been able to record the NO₂ spectrum down to 11200 cm⁻¹ with a new Ti:sapphire ICLAS spectrometer. As a result 249 ²B₂ vibronic bands have been observed (175 cold bands and 74 hot bands) in the 11200–16150 cm⁻¹ energy range. Due to the cooling effect of the slit jet we have reduced the rotational temperature down to about 12 K and at this temperature the K = 0 subbands are dominant. Consequently, we have analysed only the K = 0 manifold for N 7 of each vibronic band. The dynamical range of the band intensities is about one thousand. Due to the strong vibronic interaction between the ²A₁ and à ²B₂ electronic states, we observed not only the a₁ vibrational levels of the à ²B₂ state but also the b₂ vibrational levels of the ²A₁ state interacting with the previous ones. By comparison with the calculated density of states, we conclude that we have observed about 65% of the total number of ²B₂ vibronic levels located in the studied range. However, there are more missing levels in the IR because of the weakness of the spectrum in this range. The correlation properties of this set of vibronic levels have been analysed calculating the power spectrum of the absorption stick spectrum which displays periodic motions: the dominant period, at 714 ± 20 cm⁻¹, corresponds to the bending motion of the à ²B₂ state. The other observed periods remain unassigned. In contrast the next neighbor spacing distribution (NNSD) shows a strong level repulsion, i.e. a manifestation of quantum chaos. These two observations, apparently contradictory, can be rationalized as follows: the short time dynamics, for t < 10⁻¹² s, is “regular” while for longer times the dynamics becomes “chaotic”. We suggest that this behavior may be observed directly with a pump and probe fs laser experiment.     

19F NMR chemical shifts of n-F-alkyl compounds

The examination of ¹⁹F chemical shifts for ca. 650 F-alkylated compounds of general formula CF₃(CF₂)_nCF₂X led to the following conclusions: the CF₂ groups α to X are very sensitive to the nature of X, and are spread over a range of 85 ppm. The effect of the length of the F-alkyl chain decreases rapidly, so that δCF₂(α) can already be considered as characteristic of X for n = 1 or 2 for most practical purposes. Solvent effects (in 9 different solvents having ε = 1.8 to 52.1) were found to be rather small except for the F-alkyl iodides. A chart which indicates the domain in which the CF₂(α) resonance signal is to be expected is given for 42 different series of F-alkylated compounds; it is expected to provide the synthetic chemist with a useful tool for the identification and characterization of such compounds.     

Investigation of the diffusion coefficient of polymers and micelles in aqueous solutions using the Soret effect in cw-laser thermal lens spectrometry

The concentration gradient (Soret effect) induced in cw-laser thermal lens spectrometry subsequently to the formation of the thermal gradient (thermal lens effect) has been investigated in aqueous solutions of various macromolecular species including micelles, mixed micelles and polymers. It is shown that the build-up of the concentration gradient is much shorter than that in classical Soret experiments, reaching steady-state values in less than 1 min. The time evolution of the Soret signal has been used to derive mass-diffusion times from which mass-diffusion coefficients were calculated. Our data are in agreement with previous results obtained from quasi-elastic light scattering studies for the micellar solutions and calculated from a known molecular weight-dependent power law for polymer solutions.     

ESR. Spectra and Structures of Radical Anions in the Dibenzo[a,e]cyclooctene Series

ESR. studies are reported for the radical anions of 5,6-didehydro- and 5,6,11,12-tetradehydro-dibenzo[a,e]cyclooctene (III and IV, resp.), in addition to that of dibenzo[a,e]cyclooctene (II) itself, the spectrum of which has been reexamined. Comparison of the proton and ¹³C coupling constants for II·?, III·? and IV·? indicates that the three radical anions do not differ greatly in their electronic and molecular structures. This statement implies that II·? should also be substantially planar, i.e., the tub-shaped eight-membered ring in II is expected to flatten on passing from the neutral molecule to its radical anion. Support for postulating such a change in geometry, analogous to that encountered with the parent cyclooctatetraene (I), is provided by INDO calculations.     

Effect of the pH, the concentration and the nature of the buffer on the adsorption mechanism of an ionic compound in reversed-phase liquid chromatography. II. Analytical and overloaded band profiles on Symmetry-C18 and Xterra-C18

In a previous report, the influence of the pH, the concentration, and the nature of the buffer on the retention and overloading behavior of propranolol (pKa = 9.45) was studied on Kromasil-C18 at 2.75 < pH < 6.75, using four buffers (phosphate, acetate, phthalate, and succinate), at three concentrations, 6, 20, and 60 mM. The results showed that the propranolol cation was eluted as an ion-pair with the buffer counter-anion. A similar study was carried out with Symmetry-C18 and Xterra-C18. Two additional buffers, formate and citrate, were also used. Propranolol elution band profiles were recorded for a small (less than 1 microg) and a large (375 microg) sample size. The results are similar to those obtained with Kromasil and confirm earlier conclusions. The buffer concentration, not its pH, controls the retention time of propranolol, in agreement with the chaotropic model. The retention factor depends also on the nature of the buffer, particularly on its valence, and on the hydrophobicity of the basic anion. With the monovalent anions HCOO- (pH 3.75), H2PO4- (pH 2.75), HOOC-Ph-COO- (pH 2.75), HOOC-CH2-CH2-COO- (pH 4.16), CH3COO- (pH 4.75) and HOOC-CHCOOH-COO- (pH 3.14), at moderate loadings, and for the two larger buffer concentrations, the band profiles are well accounted for by a simple bi-Langmuir isotherm model (no adsorbate-adsorbate interactions). By contrast, these profiles are accounted for by a bi-Moreau isotherm model (i.e., with significant adsorbate-adsorbate interactions) with the bivalent anions -OOC-Ph-COO- (pH 4.75), -OOC-CH2-CH2-COO- (pH 5.61), HPO4(2-) (pH 6.75), and HOOC-CHCOO(-)-COO- (pH 4.77) and with the trivalent anion -OOC-CHCOO(-)-COO- (pH 6.39). The best values of the isotherm parameters were determined using the inverse method. The saturation capacity and the equilibrium constant on the low-energy sites increase with increasing buffer concentration, a result consistent with the formation in the mobile phase of a hydrophobic complex between the propranolol cation and the buffer anion. With bivalent and trivalent anions, adsorbate-adsorbate interactions are strong on the low-energy sites but they remain negligible on the high-energy sites. The density of the high energy sites is lower and the equilibrium constant on the low-energy sites are both higher with the bivalent and the trivalent buffer anions than with the univalent buffer anions. These results are consistent with the formation of a 2:1 and a 3:1 propranolol-buffer complex with the bivalent and the trivalent anions, respectively.     

Proprietes magnetiques et electriques de la phase Ca2MnO4−xFx

The magnetic properties of the antiferromagnetic Ca₂MnO_4?x solid solution (0?x?0,30) are essentially characterized by a weak ferromagnetism with a maximum value for x = 0,20. Spin canting results from the competition between the antiferromagnetic super-exchange couplings and the double exchange ferromagnetic interactions due to the presence of manganese in oxidation states + III and + IV. It seems independent of the site of fluorine in the framework. The variation of Weiss constant and ordering temperature withx is also discussed. Electrical conductivity results from a hopping mechanism between Mn³⁺ and Mn⁴⁺ ions. The electrical conductivity presents a maximum when x = 0.10, corresponding to an activation energy minimum.     

The measurement of the magnetic susceptibility of some elements (Fe,Co, Ni,Ge, Sn,Te) in the liquid state

A magnetic balance was used for measuring the susceptibility of metals and alloys, in an atmosphere of purified argon, up to 1800°c.

Comparison of the susceptibilities of liquid Fe, Co and Ni gives information on the liquid state. The changes in the susceptibilities of Ge, Sn and Te on melting are typical of semi-metallic elements and semiconductors, but their behaviour differs according to the degree of symmetry in the solid state.