An improved numerical simulator for multiphase flow in porous media

In basin modelling the thermodynamics of a multicomponent multiphase fluid flux are computationally too expensive when derived from an equation of state and the Gibbs equality constraints. In this article we present a novel implicit molar mass formulation technique using binary mixture thermodynamics. The two proposed solution methods, with and without cross derivative terms between components, are based on a preconditioned Newton‐GMRES scheme for each time‐step with analytical computation of the derivatives. These new algorithms reduce significantly the numerical effort for the computation of the molar masses, and we illustrate the behavior of these methods with numerical computations. Copyright © 2004 John Wiley & Sons Ltd.     

Enhancement of the emission yield of silicon nanocrystals in silica due to surface passivation

The ability of surface passivation to enhance the photoluminescence (PL) emission of Si nanocrystals in SiO₂ has been investigated. Silicon precipitation in implanted samples takes place in a time scale of few minutes at 1100°C. For longer annealing at the same temperature, the PL intensity of the Si nanocrystals increases and eventually reaches saturation, while it correlates inversely with the amount of Si dangling bonds at the Si–SiO₂ interface (P_b centers), as measured by electron spin resonance. This combined behavior is independent on the silica matrix properties, implantation profiles and annealing atmosphere and duration. The observation that the light emission enhancement is directly related to the annealing of P_b centers is confirmed by treatment in forming gas. This mild hydrogenation at much lower temperature (450°C) leads to a complete passivation of the P_b defects, increasing at the same time the PL yield and the lifetime.     

In Vitro Evaluation of the Photoreactivity and Phototoxicity of Natural Polyphenol Antioxidants

Polyphenols are a large family of natural compounds widely used in cosmetic products due to their antioxidant and anti-inflammatory beneficial properties and their ability to prevent UV radiation-induced oxidative stress. Since these compounds present chromophores and are applied directly to the skin, they can react with sunlight and exert phototoxic effects. The available scientific information on the phototoxic potential of these natural compounds is scarce, and thus the aim of this study was to evaluate the photoreactivity and phototoxicity of five phenolic antioxidants with documented use in cosmetic products. A standard ROS assay was validated and applied to screen the photoreactivity of the natural phenolic antioxidants caffeic acid, ferulic acid, p-coumaric acid, 3,4-dihydroxyphenylacetic acid (DOPAC), and rutin. The phototoxicity potential was determined by using a human keratinocyte cell line (HaCaT), based on the 3T3 Neutral Red Uptake phototoxicity test. Although all studied phenolic antioxidants absorbed UV/Vis radiation in the range of 290 to 700 nm, only DOPAC was able to generate singlet oxygen. The generation of reactive oxygen species is an early-stage chemical reaction as part of the phototoxicity mechanism. Yet, none of the studied compounds decreased the viability of keratinocytes after irradiation, leading to the conclusion that they do not have phototoxic potential. The data obtained with this work suggests that these compounds are safe when incorporated in cosmetic products.     

Stochastic quantization and path integral formulation of Fokker-Planck equation

The operator formalism (Fokker-Planck dynamics) associated to a general n-dimensional, non-linear drift, non-constant diffusion Fokker-Planck equation, is derived by a stochastic quantization from the corresponding path integral formulation in phase space.     

Closed-form BER analysis of variable weight MPPM coding under gamma-gamma scintillation for atmospheric optical communications

In this paper, the performance of the variable weight multiple pulse-position modulation (MPPM) coding technique in an atmospheric optical communication environment under gamma-gamma optical scintillation is analyzed, proposing a closed-form expression for the average bit error rate (BER). This study is based on a hyperexponential fitting of the conditional BER in absence of turbulence fluctuations, leading to closed-form expressions that characterize the behavior of this nonlinear coding scheme. Finally, conditional and average BER expressions proposed here are corroborated with Monte Carlo simulations results.     

Comprehensive analysis of polycyclic aromatic hydrocarbons in wastewater using stir bar sorptive extraction and gas chromatography coupled to tandem mass spectrometry

The objective of this study was the optimization and comparison of two extraction methods for the determination of polycyclic aromatic hydrocarbons (PAHs) in wastewater (WW). A distribution study of the target compounds between the aqueous phase and the suspended particulate matter (SPM) has been performed in order to establish whether the analysis of both phases is necessary. In this sense, the feasibility of stir bar sorptive extraction (SBSE) and solid-phase extraction (SPE) for the determination of 24 PAHs in WW samples has been evaluated. The results demonstrated the suitability of SBSE to perform a comprehensive analysis of liquid samples containing high amounts of SPM, such as in the determination of PAHs in WWs. A gas chromatography triple quadrupole mass spectrometry (GC-QqQ-MS/MS) method has been also optimized for the separation and detection of the target compounds, avoiding the co-elution of some groups of isomers, such as benzo[b], [j] and [k] fluoranthenes and indene[1,2,3-cd]pyrene/dibenz[a,h]anthracene. For that purpose, a specific capillary column developed for PAH determination was used. The SBSE procedure was validated and adequate parameters (such as recovery, linearity, precision, limits of detection and quantification) were obtained. Finally, the validated method was applied to the analysis of real samples collected from an experimental WW treatment plant, detecting some PAHs at concentrations in the range 0.007-0.022 μg L(-1).     

Simple LC–MS Determination of Citric and Malic Acids in Fruits and Vegetables

A rapid, reliable and sensitive method has been developed to determine malic and citric acid in fruits and vegetables. The methodology is based on simple extraction with an aqueous solution of ethanol (80% v/v) and subsequent chromatographic analysis by liquid chromatography coupled to mass spectrometry. Electrospray ionization in negative mode was used. The best response for citric and malic acid was provided by molecular ions [M?H]^? at m/z 191 and 133 respectively. These ions were used for quantification, whereas other fragments were used as confirmation ions. Different variables involved in the separation and detection process, such as mobile phase, gradient profile and flow rate have been optimised. Linearity, repeatability, recovery and limits of quantification were evaluated. Good linearity was obtained up to 5,000 mg kg^?1. Recovery ranged from 90.0 to 104.6%, repeatability (expressed as RSD) was <8% for tested matrices, and limits of quantification were equal or lower than 65 mg kg^?1. Finally, the method was applied to the analysis of samples of orange, tomato and pepper.     

Peptide sequence mediated self-assembly of molybdenum blue nanowheel superstructures

The precise control over the formation of complex nanostructures, e.g. polyoxometalates (POMs), at the sub-nanoscale is challenging but critical if non-covalent architectures are to be designed. Combining biologically-evolved systems with inorganic nanostructures could lead to sequence-mediated assembly. Herein, we exploit oligopeptides as multidentate structure-directing ligands via metal-coordination and hydrogen bonded interactions to modulate the self-assembly of POM superstructures. Six oligopeptides (GH, AH, SH, G₂H, G₄H and G₅H) are incorporated into the cavities of Molybdenum Blue (MB) POM nanowheels. It is found that the helicity of the nanowheel can be readily switched (Δ to Λ) by simply altering the N-terminal amino acid on the peptide chain rather than their overall stereochemistry. We also reveal a delicate balance between the Mo-coordination and the hydrogen bonds found within the internal cavity of the inorganic nanowheels which results in the sequence mediated formation of two unprecedented asymmetrical nanowheel frameworks: {Mo₁₂₂Ce₅} and {Mo₁₂₆Ce₄}.

Peptide sequence can be used to control the self-assembly and structures of nanoscale molybdenum blue polyoxometalate (POM) wheel-shaped clusters.