Chiral electrokinetic chromatography using dipeptide polymeric surfactants: present state of the art

Polymeric amino acid based surfactants have been recently employed as pseudostationary phases in capillary electrophoresis. These phases are effective for chiral separation of analytes in different charge states and hydrophobicities. This review paper focuses on polymeric dipeptide surfactants. The benefits of dipeptide over single amino acid micelle polymers are shown. Some aspects of dipeptide surfactants that are presented here includes the amino acid order, effect of number and position of chiral centers, and steric factors on enantiomeric separation of chiral compounds in different charge states. In addition, the preferential site of interaction of the chiral analyte using diastereomers of polymeric dipeptide surfactants is discussed.     

Thermodynamics and Phase Transition of Topological Dilatonic Lifshitz-Like Black Holes

It is known that scalar-tensor gravity models can be studied in Einstein and Jordan frames. In this paper, a model of scalar-tensor gravity in Einstein's frame is considered to calculate the Lifshitz-like black hole solutions with different horizon topologies. Thermodynamic properties and first order van der Waals-like phase transition are studied, and it is found that the Lifshitz parameter affects the phase structure. In addition, thermal stability is investigated by using the behavior of heat capacity and various methods of geometrical thermodynamics.     

Terpolymerization of Triisopropylsilyl Acrylate,Methyl Methacrylate,and Butyl Acrylate: Reactivity Ratio Estimation

Ternary monomer reactivity ratios of triisopropylsilyl acrylate (SiA), methyl methacrylate (MMA), and n‐butyl acrylate (BA), as common monomers in self‐polishing coatings (SPCs) binders are obtained using experimental data collected from free radical bulk polymerization at 70 °C. Different terpolymerizations at low and medium‐high conversions are performed at optimized feed compositions. Estimations are made using the error‐in‐variables model (EVM) framework, applying the recast form of the Alfrey–Goldfinger (AG) model and a direct numerical integration (DNI) approach to the collected data. Estimations from individual low and medium‐high conversion data are compared to those found with the combined data (full conversion range data). The highest certainty in point estimates are obtained with analysis of the full conversion range data. Furthermore, the reactivity ratios determined from the combined data fall between those found with analysis of individual low and medium‐high conversion data, another corroboration of reliable data collection. Reactivity ratios determined from analysis of the combined data (r_SiA/MMA = 0.4185, r_MMA/SiA = 1.3754, r_SiA/BA = 0.8739, r_BA/SiA = 0.5736, r_BA/MMA = 0.3692, r_MMA/BA = 1.7919) are used in the recast AG model to predict cumulative terpolymer composition as a function of conversion. The experimental data and model prediction show satisfactory agreement.     

Green synthesis of silver nanoparticles by pepper extracts reduction and its electocatalytic and antibacterial activity

Stable silver nanoparticles were synthesized with the aid of a novel, non-toxic, eco-friendly biological material namely, green pepper extract. The aqueous pepper extract was used for reducing silver nitrate. The synthesized silver nanoparticles were analyzed with transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). TEM image shows the formation of silver nanoparticles with average particle size of 20 nm which agrees well with the XRD data. The main advantage of using pepper extract as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. To investigate the electrocatalytic efficiency of silver nanoparticles, silver nanoparticles modified carbon-paste electrode (AgNPs–CPE) displayed excellent electrochemical catalytic activities towards hydrogen peroxide (H₂O₂) and hydrogen evolution reaction (HER). The reduction overpotential of H₂O₂ was decreased significantly compared with those obtained at the bare CPE. An abrupt increase of the cathodic current for HER was observed at modified electrode. Also, the antibacterial activity of silver nanoparticle was performed using Escherichia coli and Salmonellae. The approach of plant-mediated synthesis appears to be cost efficient, eco-friendly and easy methods.     

Direct electrochemistry and bioelectrocatalysis of a class II non-symbiotic plant haemoglobin immobilised on screen-printed carbon electrodes

In this study, direct electron transfer (ET) has been achieved between an immobilised non-symbiotic plant haemoglobin class II from Beta vulgaris (nsBvHb2) and three different screen-printed carbon electrodes based on graphite (SPCE), multi-walled carbon nanotubes (MWCNT-SPCE), and single-walled carbon nanotubes (SWCNT-SPCE) without the aid of any electron mediator. The nsBvHb2 modified electrodes were studied with cyclic voltammetry (CV) and also when placed in a wall-jet flow through cell for their electrocatalytic properties for reduction of H₂O₂. The immobilised nsBvHb2 displayed a couple of stable and well-defined redox peaks with a formal potential (E°′) of ?33.5 mV (vs. Ag|AgCl|3 M KCl) at pH 7.4. The ET rate constant of nsBvHb2, k _s, was also determined at the surface of the three types of electrodes in phosphate buffer solution pH 7.4, and was found to be 0.50 s^?1 on SPCE, 2.78 s^?1 on MWCNT-SPCE and 4.06 s^?1 on SWCNT-SPCE, respectively. The average surface coverage of electrochemically active nsBvHb2 immobilised on the SPCEs, MWCNT-SPCEs and SWCNT-SPCEs obtained was 2.85?×?10^?10 mol cm^?2, 4.13?×?10^?10 mol cm^?2 and 5.20?×?10^?10 mol cm^?2. During the experiments the immobilised nsBvHb2 was stable and kept its electrochemical and catalytic activities. The nsBvHb2 modified electrodes also displayed an excellent response to the reduction of hydrogen peroxide (H₂O₂) with a linear detection range from 1 μM to 1000 μM on the surface of SPCEs, from 0.5 μM to 1000 μM on MWCNT-SPCEs, and from 0.1 μM to 1000 μM on SWCNT-SPCEs. The lower limit of detection was 0.8 μM, 0.4 μM and 0.1 μM at 3σ at the SPCEs, the MWCNT-SPCEs, and the SWCNT-SPCEs, respectively, and the apparent Michaelis–Menten constant, $ {\hbox{K}}_{\rm{M}}^{\rm{app}} $ , for the H₂O₂ sensors was estimated to be 0.32 mM , 0.29 mM and 0.27 mM, respectively.     

CO2 reforming of methane over nickel catalysts supported on nanocrystalline MgAl2O4 with high surface area

In this paper dry reforming of methane (DRM) was carried out over nanocrystalline MgAl2O4-supported Ni catalysts with various Ni loadings. Nanocrystalline MgAl2O4 spinel with high specific surface area was synthesized by a co-precipitation method with the addition of pluronic P123 triblock copolymer as surfactant, and employed as catalyst support. The prepared samples were characterized by X-ray diffraction (XRD), N2 adsorption, H2 chemisorption, temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), temperature- programmed desorption (TPD) and transmission and scanning electron microscopies (TEM, SEM) techniques. The obtained results showed that the catalyst support has a nanocrystalline structure (crystal size: about 5 nm) with a high specific surface area (175 m2 g-1) and a mesoporous structure. Increasing in nickel content decreased the specific surface area and nickel dispersion. The prepared catalysts showed high catalytic activity and stability during the reaction. SEM analysis revealed that whisker type carbon deposited over the spent catalysts and increasing in nickel loading increased the amount of deposited carbon. The nickel catalyst with 7 wt% of nickel showed the highest catalytic activity.     

Preparation and characterization of Ni(II)/polyacrylonitrile and carbon nanotube composite modified electrode and application for carbohydrates electrocatalytic oxidation

A nickel(II) into porous polyacrylonitrile–carbon nanotubes composite modified glassy carbon electrode (Ni/PAN-CNT/GCE) was fabricated by simple drop-casting and immersing technique. The unique electrochemical activity of Ni/PAN-CNT composite modified glassy carbon electrode was illustrated in 0.10?M NaOH using cyclic voltammetry. The Ni/PAN-CNT/GCE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple compared with Ni/PAN/GCE and Ni/CNT/GCE. The results of electrochemical impedance spectroscopy and scanning electron microscopy indicated the successful immobilization for PAN-CNT composite film. Kinetic parameters such as the electron transfer coefficient, α, and rate constant, k _s, of the electrode reaction were determined. Ni/PAN-CNT/GCE also shows good electrocatalytic activity toward the oxidation of carbohydrates (glucose, sucrose, fructose, and sorbitol). The electrocatalytic response showed a wide linear range (10–1,500, 12–3,200, 7–3,500, and 16–4,200?μM for glucose, sucrose, fructose, and sorbitol, respectively) as well as its experimental limit of detection can be achieved 6, 7, 5, and 11?μM for glucose, sucrose, fructose, and sorbitol, respectively. The modified electrode for carbohydrates determination is of the property of simple preparation, good stability, and high sensitivity.     

Fabrication of Chitosan‐Multiwall Carbon Nanotube Nanocomposite Containing Ferri/Ferrocyanide: Application for Simultaneous Detection of D‐Penicillamine and Tryptophan

We report a simple and effective strategy for fabrication of the nanocomposite containing chitosan (CS) and multiwall carbon nanotube (MWNT) coated on a glassy carbon electrode (GCE). The characterization of the modified electrode (CS‐MWNT/GC) was carried out using scanning electron microscopy (SEM) and UV–vis absorption spectroscopy. The electrochemical behavior of CS‐MWNT/GC electrode was investigated and compared with the electrochemical behavior of chitosan modified GC (CS/GC), multiwalled carbon nanotube modified GC (MWNT/GC) and unmodified GC using cyclic voltammetry (CV) and electron impedance spectroscopy (EIS). The chitosan films are electrochemically inactive; similar background charging currents are observed at bare GC. The chitosan films are permeable to anionic Fe(CN)₆^3?/4? (FC) redox couple. Electrochemical parameters, including apparent diffusion coefficient for the Fe(CN)₆^3?/4? redox probe at FC/CS‐MWNT/GC electrode is comparable to values reported for cast chitosan films. This modified electrode also showed electrocatalytic effect for the simultaneous determination of D‐penicillamine (D‐PA) and tryptophan (Trp). The detection limit of 0.9 μM and 4.0 μM for D‐PA and Trp, respectively, makes this nanocomposite very suitable for determination of them with good sensitivity.     

A new method for the synthesis of amides from imines

An efficient and straightforward method for the synthesis of amides by the reaction of imines and anhydrides in the presence of Et₃SiH/Zn is reported. Mild reaction conditions, good yields of products, short reaction times, and operational simplicity are advantages of this procedure.