Mechanism of the condensation reaction between 1-aryl- and heteroaryl-1,4-dihydro-3(2H)-isoquinolinones and aldehydes

4-Benzylidene-1-phenyl-1,4-dihydro-3(2H)-isoquinolinone, the intermediary product of the carbonyl condensation reaction between 1-phenyl-1,4-dihydro-3(2H)-isoquinolinone and benzaldehyde, rearranges in the presence of an equivalent quantity of sodium hydride into 4-benzyl-1-phenyl-3(2H)-isoquinolinone. As the possibility of the migration of the hydrogen at C-1 in the form of a proton or a hydrogen atom (radical reaction) was excluded, the mechanism of the rearrangement could be depicted as an intermolecular hydride anion migration. In case of the 1-(4-pyridyl)- and 1-(3-pyridyl)-1,4-dihydro-3(2H)-isoquinolinones, however, the rearrangement can be carried out also in polyphosphoric acid and in this case a proton loss-proton gain mechanism was proved.     

Comparative study on separation of diastereomers by HPLC

Summary Reversed (RP-HPLC) and normal phase chromatographic (NP-HPLC) separations have been developed for diastereomers ofN-acyl-1-methyl-1,2,3,4-tetrahydo-β-carbolines which are acylated derivatives of simple natural β-carboline alkaloids. Separations of derivatives having different acyl moieties in theO,O-diacyl-tartaric acid ester subtituent differed remarkably. Little or no resolution in either NP-HPLC or RP-HPLC could be achieved with the diacetyl-tartrate derivative. Base-line separation by RP-HPLC but no separation by NP-HPLC was possible with the bulkier and more apolar dipivaloyl derivative. Retention order of the bis-benzoylated diastereomers was reversed and separation time increased dramatically by RP-HPLC. Good separation of the medium polarity, but rigid,N-camphanyl derivative by NP-HPLC has been achieved, whereas RP-HPLC could not be used for separation of these diastereomers. Separability of different diastereomers was highly dependent on polarity and rigidity of the derivatizingN-acyl moieties. Conformational analysis by molecular mechanics and comparison of the lowest energy conformational states of the diastereomers was applied to rationalise separation-retention behaviour of stereoisomers by RP-HPLC. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Crystallization and grain growth characteristics of yttria-stabilized zirconia thin films grown by pulsed laser deposition

Knowledge about the crystallization and grain growth characteristics of metal oxide thin films is essential for effective microstructural engineering by thermal post-annealing and the integration to Si-based miniaturized electroceramic devices. Finite size and interface effects may cause fundamentally different behavior compared to three dimensional macroscopic systems. This work presents a comprehensive investigation of the crystallization kinetics and microstructural evolution upon thermal post-annealing of amorphous 200 nm and 1.2 μm thin films of 8 mol% yttria-stabilized zirconia grown by pulsed laser deposition (PLD) using ex- and in-situ X-ray diffraction, Raman spectroscopy, and electron microscopy techniques. The layers exhibit a remarkably low crystallization temperature of 200-250 °C while exposure to energetic electrons induces the formation of randomly dispersed ~ 20 nm sized crystallites already at ambient temperature. The isothermal amorphous to crystalline phase transformation kinetics can be described quantitatively by the Johnson-Mehl-Avrami-Kolmogorov model. They reveal characteristics of a three dimensional growth under cation bulk diffusion control with heterogeneous nucleation that changes from continuous to instantaneous initial seeding at temperatures above 300 °C. Large (> 100 nm) equiaxed grains are formed rapidly without a stabilization of transient nanocrystals during the thermally induced phase transformation. A stagnation of normal grain growth resulting in a logarithmic normal size distribution is observed once the average grain dimensions approach the film thickness. The results on the crystallization and grain growth of the PLD-grown YSZ films are evaluated with regards to the fabrication of YSZ solid electrolyte membranes for Si-supported micro solid oxide fuel cells and gas sensors.     

Contribution of individual flavonoids in Lysimachia species to the antioxidant capacity based on HPLC-DPPH assay

Quantitative phytochemical characterisation of the chief flavonoid aglycones in the hydrolysed Lysimachia extracts revealed the dominance of kaempferol, quercetin and myricetin in L. vulgaris, L. nummularia, L. punctata, L. christinae, L. ciliata and L. clethroides, respectively. Due to the significant radical scavenging capacity of the samples, the contribution of the individual aglycones to the total antioxidant activity became of interest. Therefore, a HPLC method coupled to pre-column DPPH scavenging assay was developed. Differences in the six Lysimachia species’ phenolic composition regarding their participation to the antioxidant activity were revealed. The participation of the three investigated flavonoids to the radical quenching activity was the highest (91.2%) in the L. vulgaris sample, the lowest in L. christinae sample with 29.6%. In L. vulgaris sample, the 76.3% contribution of quercetin to the scavenger capacity was the highest peak area decrement ratio among the investigated samples.     

Chemical reactivity of [1,2,3]triazolo[1,5-a]- and [1,5-c]-pyrimidinium salts

The chemical reactivity of the [1,2,3]triazolo[1,5-a]- and [1,5-c]-pyrimidinium salts towards morpholine, water and sodium methoxide have been studied. Among others, new 1-aza and 2-azabutadienes substituted by a [1,2,3]-triazole ring were obtained in the course of the opening of the positively charged pyrimidine ring.     

Comparative bioanalytical study of3H-deramciclane in dog plasma, using a gas chromatography-nitrogen-selective detection (GC-NPD), a new GC-radiochemical detection (GC-RD) and a liquid scintillation method

Summary A new, highly sensitive and selective gas chromatography method, using radiochemical detection (GC-DR) was developed for the selective determination of³H-labelled deramciclane and its N-desmethyl metabolite in dog plasma. Inter-day accuracy and precision, as well as system suitability of the GC-RD method was investigated during the method validation. The calibration curve was proved to be linear (r=0.9986) in a wide concentration range (13–1000 ngeqv mL⁻¹) The lower limit of quantitation (LLOQ) was 13.7 ngeqv mL⁻¹, and the limit of the detection (LOD) was 1 ngeqv mL⁻¹. Using this new GC-RD method, plasma levels of³H-labelled deramciclane and its metabolite were determined in dogs, after the administration of a single 10 mg kg⁻¹ oral dose. Pharmacokinetic curves and the calculated pharmacokinetic parameters were compared to those obtained using a previously elaborated gas chromatography-nitrogen selective detection method (GC-NPD) and to those obtained by measuring the plasma level of total radioactivity (liquid scintillation counting, LSC). Pharmacokinetic curves and the calculated pharmacokinetic parameters obtained with the two different gas chromatography detection methods (NPD and RD) showed good correlation. Comparison of these results to those acquired by total radioactivity measurement demonstrated that deramciclane was intensively metabolised. Moreover, the biological half-life (t ₁ ^2/β ) of the unknown metabolites proved to be more than a magnitude longer than the half-life of the parent compound or that of N-desmethyl metabolite. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997.     

NMR study of some diastereomeric nucleoside-3′-thiophosphate derivatives in solution

The conformational properties of diastereomeric P-modified nucleotides are reported as reflected by different NMR parameters. Some conformational trends can be rationalized by consideration of the ³J(C4,P) and ³J(C2,P) coupling values of the isomers and the nature of the substituent on the phosphorus. Configurational assessment of the phosphorus is inferred from NOE experiments. The effects of temperature, solvent and size of substituents are presented.     

Two Stage Solid Phase Extraction with Subsequent HPLC Isolation for Structure Elucidation of Major Metabolites of (+)-(R)-2-{3-(benzo[1,4]dioxan-2-yl-methylamino)-1-propyl}-3(2H)-pyridazinone (GYKI-16084)

GYKI-16084 – (+)-(R)-2-{3-(benzo[1,4]dioxan-2-yl-methylamino)-1-propyl}-3(2H)-pyridazinone hydrochloride – is a new drug candidate for the treatment of benign prostatic hyperplasia. In our study the major metabolites formed in the rat and dog were isolated from dog and rat urine, then their structures were elucidated by means of MS and NMR. A two stage solid phase extraction (SPE) procedure and a semi-preparative HPLC method were developed utilizing various mechanisms of separation. The major metabolites proved to be isomeric glucuronides of the benzodioxane moiety hydroxylated at positions 6 or 7 and {2-(2-carboxyethyl)-3(2H)-pyridazinone}.     

Activation of metal hydride complexes by tri-tert-butylphosphine-platinum and -palladium groups

The compounds HM(CO)4SnPh3, M = Os (10), Ru (11) are activated in the presence of Pt(PBut3)2 and Pd(PBu(t)3)2 toward the insertion of PhC2H into the M-H bond. The compounds PtOs(CO)4(SnPh3)(PBu(t)3)[mu-HCC(H)Ph], 12, and PtOs(CO)4(SnPh3)(PBu(t)3)[mu-H2CCPh], 13, were obtained from the reaction of 10 with PhC2H in the presence of Pt(PBu(t)3)2. Compounds 12 and 13 are isomers containing alkenyl ligands formed by the insertion of the PhC2H molecule into the Os-H bond at both the substituted and unsubstituted carbon atoms of the alkyne. Both compounds contain a Pt(PBu(t)3) group that is bonded to the osmium atom and a bridging alkenyl ligand that is pi-bonded to the osmium atom. The reaction of 11 with PhC2H in the presence of Pt(PBu(t)3)2 yielded the products PtRu(CO)4(SnPh3)(PBu(t)3)[mu-HC2(H)Ph], 14, and PtRu(CO)4(SnPh3)(PBut3)[mu-H2C2Ph], 15, which are also isomers similar to 12 and 13. The reaction of 11 with PhC2H in the presence of Pd(PBu(t)3)2 yielded the product PdRu(CO)4(SnPh3)(PBu(t)3)[mu-H2C2Ph], 16. Compound 16 contains a Pd(PBu(t)3) group bonded to the ruthenium atom and a bridging H2C2Ph ligand that is pi-bonded to the palladium atom. Compound 10 reacted with Pt(PBu(t)3)2 in the absence of PhC2H to yield the compound PtOs(CO)4(SnPh3)(PBu(t)3)(mu-H), 17. Compound 17 is a Pt(PBu(t)3) adduct of 10. It contains a Pt-Os bond with a bridging hydrido ligand. Compound 17 reacted with PhC2H to yield 12. Compound 12 reacted with PhC2H to yield the compound PtOs(CO)3(SnPh3)(PBu(t)3)[mu-HCC(Ph)C(H)C(H)Ph], 18. Compound 18 contains a bridging 2,4-diphenylbutadienyl ligand, HCC(Ph)C(H)C(H)Ph, that is pi-bonded to the osmium atom and sigma-bonded to the platinum atom. Fenkse-Hall molecular orbitals of 17 were calculated. The LUMO of 17 exhibits an empty orbital on the platinum atom that appears to be the most likely site for PhC2H addition prior to its insertion into the Os-H bond.