Experimental study and mathematical modelling of a new of vibro-impact moling device

In this paper experimental study and mathematical modelling of newly designed vibro-impact moling rig are presented. The design is based on electro-mechanical interactions of a conductor with an oscillating magnetic field. The rig consists of a metal bar placed within a solenoid which is connected to an RLC circuit, and an obstacle block positioned nearby. Both the solenoid and the block are attached to a base board. Externally supplied alternating voltage causes the bar to oscillate and hit the block resulting in the forward motion of the base board mimicking a mole penetration through the soil. By varying the excitation voltage and the capacitance in the circuit, a variety of system responses can be obtained.In the paper the rig design and experimental procedure are explained in detail, and the mathematical modelling of the rig is described. Then the obtained coupled electro-mechanical equations of motion are integrated numerically, and a comparison between experimental results and numerical predictions is presented.     

Influence of the reaction temperature and ph on the coordination modes of the 1,4-benzenedicarboxylate (BDC) ligand: a case study of the Ni(II)(BDC)/2,2'-bipyridine system

Three new Ni(BDC)/2,2'-bipy compounds, Ni2(BDC)(HBDC)2(2,2'-bipy)2 (2), Ni3(BDC)3(2,2'-bipy)2 (3), and Ni(BDC)(2,2-bipy)2.2H2O (5), in addition to the previously reported Ni(BDC)(2,2'-bipy).0.75H2BDC (1) and Ni(BDC)(2,2'-bipy)(H2O) (4) [BDC = 1,4-benzenedicarboxylate; 2,2'-bipy = 2,2'-bipyridine], have been synthesized by hydrothermal reactions. A systematic investigation of the effect of the reaction temperature and pH resulted in a series of compounds with different compositions and dimensionality. The diverse product slate illustrates the marked sensitivity of the structural chemistry of polycarboxylate aromatic ligands to synthesis conditions. Compound 1, which has a channel structure containing guest H2BDC molecules, is formed at the lowest pH. The guest H2BDC molecules are connected by hydrogen bonds and form extended chains. At a slightly higher pH, a dimeric molecular compound 2 is formed with a lower number of protonated carboxylate groups per nickel atom and per BDC ligand. Reactions at higher temperature and the same pH lead to the transformation of 1 and 2 into the two-dimensional, layered trinuclear compound 3. As the pH is increased, a one-dimensional polymer 4 is formed with a water molecule coordinated to Ni2+. Bis-monodentate and bischelating BDC ligands alternate along the chain to give a crankshaft rather than a regular zigzag arrangement. A further increase of the pH leads to the one-dimensional chain compound 5, which has two chelating 2,2'-bipy ligands. Crystal data: 2, triclinic, space group P, a = 7.4896(9) angstroms, b = 9.912(1) angstroms, c = 13.508(2) angstroms, alpha = 86.390(2) degrees , beta = 75.825(2) degrees, gamma = 79.612(2) degrees, Z = 2; 3, orthorhombic, space group Pbca, a = 9.626(2) angstroms, b = 17.980(3) angstroms, c = 25.131(5) angstroms, Z = 4; 5, orthorhombic, space group Pbcn, a = 14.266(2) angstroms, b = 10.692(2) angstroms, c = 17.171(2) angstroms, Z = 8.     

An efficient approach to isoindolo[2,1-b][2]benzazepines via intramolecular [4+2] cycloaddition of maleic anhydride to 4-α-furyl-4-N-benzylaminobut-1-enes

Acylation of 4-α-furyl-4-N-benzylaminobut-1-enes with maleic anhydride gave 4-oxo-3-aza-10-oxatricyclo[5.2.1.0^1,5]dec-8-ene-6-carboxylic acid via amide formation followed by intramolecular Diels-Alder reaction of furan (IMDAF). The cycloaddition proceeded under mild reaction conditions (25 °C) and provided only the exo-adduct in quantitative yield. Treatment of this compound with PPA gave isoindolo[2,1-b][2]benzazepine derivatives via ring opening, aromatization and intramolecular electrophilic alkylation. In order to extend the scope of the reaction sequence, 7-oxo-5,11b,12,13-tetrahydro-7H-isoindolo[2,1-b][2]benzazepine-8-carboxylic acids were further transformed into useful synthetic intermediates.     

Specific Sorption Sites for Nitrogen in Zeolites NaLSX and LiLSX

Specific sorption sites for nitrogen, N₂, in NaLSX and LiLSX zeolites were investigated using a DRIFT spectroscopic method. Sorption of molecular hydrogen, H₂, by NaLSX or LiLSX zeolite at 77 K with DRIFT control of perturbation of sorbed molecules allowed to discriminate two or three different types of specific sorption sites in the respective zeolites. Their H–H stretching frequencies are 4077 and 4081 cm^–1 for NaLSX, and 4061, 4084 and 4129 cm^–1 for LiLSX. With reference to an independent investigation by methods of both sorption thermodynamics and molecular modeling for N₂ sorption on LiLSX, the first two of the corresponding bands were ascribed to H₂ sorption on lithium cations, Li⁺, localized in supercages of the faujasite, FAU, zeolite framework at sites SIII and SIII, while the latter band most likely belongs to H₂ sorption on Li⁺ cations at sites SII, and on hydroxyl groups, OH. Sorption of N₂ by Li⁺ cations at sites SIII and SIII is the strongest, resulting in a decrease of intensity of the corresponding DRIFT bands that stem from subsequent H₂ sorption. Nitrogen sorption by Li⁺ cations at sites SII is much weaker. Sorption of N₂ on Na⁺ cations at sites SIII in NaLSX zeolite is also stronger than by Na⁺ cations at sites SII.     

Boron tribromide mediated debenzylation of benzylamino and benzyloxy groups

The treatment of 2(or 4)-benzylamino substituted quinolines, 9-benzylaminoacridine, 2-benzylaminopyridine, a 4-benzyloxyquinoline, and an N-benzyloxyamidine with BBr₃ yields the corresponding amino or hydroxy substituted compounds. The scope and limitations of this novel reaction are discussed.     

Amidation of deltacyclene and hexacyclic norbornadiene dimers with acetonitrile and water catalyzed by FeCl3·6H2O

Abstract

FeCl₃·6H₂O-catalyzed Ritter amidation of deltacyclene and hexacyclic norbornadiene dimers containing both a double bond and a three-carbon ring in the molecule with acetonitrile and water was performed. Depending on the hydrocarbon structure, the reaction proceeds via C-C bond cleavage in the three-carbon ring or at the double bond to form the corresponding N-acetamides.     

First investigation of non-classical dihydrogen bonding between an early transition-metal hydride and alcohols: IR, NMR, and DFT approach

The interaction of [NbCp(2)H(3)] with fluorinated alcohols to give dihydrogen-bonded complexes was studied by a combination of IR, NMR and DFT methods. IR spectra were examined in the range from 200-295 K, affording a clear picture of dihydrogen-bond formation when [NbCp(2)H(3)]/HOR(f) mixtures (HOR(f) = hexafluoroisopropanol (HFIP) or perfluoro-tert-butanol (PFTB)) were quickly cooled to 200 K. Through examination of the OH region, the dihydrogen-bond energetics were determined to be 4.5+/-0.3 kcal mol(-1) for TFE (TFE = trifluoroethanol) and 5.7+/-0.3 kcal mol(-1) for HFIP. (1)H NMR studies of solutions of [NbCp(2)H(2)(B)H(A)] and HFIP in [D(8)]toluene revealed high-field shifts of the hydrides H(A) and H(B), characteristic of dihydrogen-bond formation, upon addition of alcohol. The magnitude of signal shifts and T(1) relaxation time measurements show preferential coordination of the alcohol to the central hydride H(A), but are also consistent with a bifurcated character of the dihydrogen bonding. Estimations of hydride-proton distances based on T(1) data are in good accord with the results of DFT calculations. DFT calculations for the interaction of [NbCp(2)H(3)] with a series of non-fluorinated (MeOH, CH(3)COOH) and fluorinated (CF(3)OH, TFE, HFIP, PFTB and CF(3)COOH) proton donors of different strengths showed dihydrogen-bond formation, with binding energies ranging from -5.7 to -12.3 kcal mol(-1), depending on the proton donor strength. Coordination of proton donors occurs both to the central and to the lateral hydrides of [NbCp(2)H(3)], the former interaction being of bifurcated type and energetically slightly more favourable. In the case of the strong acid H(3)O(+), the proton transfer occurs without any barrier, and no dihydrogen-bonded intermediates are found. Proton transfer to [NbCp(2)H(3)] gives bis(dihydrogen) [NbCp(2)(eta(2)-H(2))(2)](+) and dihydride(dihydrogen) complexes [NbCp(2)(H)(2)(eta(2)-H(2))](+) (with lateral hydrides and central dihydrogen), the former product being slightly more stable. When two molecules of TFA were included in the calculations, in addition to the dihydrogen-bonded adduct, an ionic pair formed by the cationic bis(dihydrogen) complex [NbCp(2)(eta(2)-H(2))(2)](+) and the homoconjugated anion pair (CF(3)COO...H...OOCCF(3))(-) was found as a minimum. It is very likely that these ionic pairs may be intermediates in the H/D exchange between the hydride ligands and the OD group observed with the more acidic alcohols in the NMR studies.     

51V solid-state magic angle spinning NMR spectroscopy and DFT studies of oxovanadium(V) complexes mimicking the active site of vanadium haloperoxidases

A series of 11 oxovanadium(V) complexes mimicking the active site of vanadium haloperoxidases have been investigated by (51)V magic angle spinning NMR spectroscopy and density functional theory (DFT). The MAS spectra are dominated by the anisotropic quadrupolar and chemical shielding interactions; for these compounds, C(Q) ranges from 3 to 8 MHz, and delta(sigma) is in the range 340-730 ppm. The quadrupolar coupling and chemical shielding tensors as well as their relative orientations have been determined by numerical simulations of the spectra. The spectroscopic NMR observables appear to be very sensitive to the details of the electronic and geometric environment of the vanadium center in these complexes. For the four crystallographically characterized compounds from the series, the quadrupolar and chemical shielding anisotropies were computed at the DFT level using two different basis sets, and the calculated tensors were in general agreement with the experimental solid-state NMR data. A combination of (51)V solid-state NMR and computational methods is thus beneficial for investigation of the electrostatic and geometric environment in diamagnetic vanadium systems with moderate quadrupolar anisotropies.     

Conjugates of Iron-Transporting N-Hydroxylactams with Ciprofloxacin

Screening of a library of novel N-hydroxylactams amenable by the Castagnoli-Cushman reaction identified four lead compounds that facilitated ⁵⁵Fe transport into P. aeruginosa cells (one of these synthetic siderophores was found to be as efficient at promoting iron uptake as the natural siderophores pyoverdine, pyochelin or enterobactin). Conjugates of the four lead siderophores with ciprofloxacin were tested for antibacterial activity against P. aeruginosa POA1 (wild type) and the ∆pvdF∆pchA mutant strain. The antibacterial activity was found to be pronounced against the ∆pvdF∆pchA mutant strain grown in CAA medium but not for the POA1 strain. This may be indicative of these compounds being ‘Trojan horse’ antibiotics. Further scrutiny of the mechanism of the antibacterial action of the newly developed conjugates is warranted.     

Quantitative Raman Analysis of Carotenoid Protein Complexes in Aqueous Solution

Carotenoids are naturally abundant, fat-soluble pigmented compounds with dietary, antioxidant and vision protection advantages. The dietary carotenoids, Beta Carotene, Lutein, and Zeaxanthin, complexed with in bovine serum albumin (BSA) in aqueous solution, were explored using Raman spectroscopy to differentiate and quantify their spectral signatures. UV visible absorption spectroscopy was employed to confirm the linearity of responses over the concentration range employed (0.05–1 mg/mL) and, of the 4 Raman source wavelengths (785 nm, 660 nm, 532 nm, 473 nm), 532 nm was chosen to provide the optimal response. After preprocessing to remove water and BSA contributions, and correct for self-absorption, a partial least squares model with R² of 0.9995, resulted in an accuracy of the Root Mean Squared Error of Prediction for Beta Carotene of 0.0032 mg/mL and Limit of Detection 0.0106 mg/mL. Principal Components Analysis clearly differentiated solutions of the three carotenoids, based primarily on small shifts of the main peak at ~1520 cm⁻¹. Least squares fitting analysis of the spectra of admixtures of the carotenoid:protein complexes showed reasonable correlation between norminal% and fitted%, yielding 100% contribution when fitted with individual carotenoid complexes and variable contributions with multiple ratios of admixtures. The results indicate the technique can potentially be used to quantify the carotenoid content of human serum and to identify their differential contributions for application in clinical analysis.