Anionic iron(II) alkoxides as initiators for the controlled ring‐opening polymerization of lactide

Hetero‐bimetallic Fe(II) alkoxide/aryloxides were evaluated as initiators for the ring‐opening polymerization of rac‐lactide. [(THF)NaFe(O^tBu)₃]₂ ( 1 ) and [(THF)₄Na₂Fe(2,6‐diisopropylphenolate)₄] ( 2 ) (THF = tetrahydrofuran) both polymerized lactide efficiently at room temperature, with complex 1 affording better control over the molecular weight parameters of the resultant polymer. At conversions below 70%, a linear increase in molecular weight with conversion was observed, indicative of a well‐controlled polymerization process. Complex 2 is the first example of a dianionic Fe(II) alkoxide and has been structurally characterized to reveal a distorted square planar FeO₄ array in which both Na counterions bridge two aryloxide ligands and are further complexed by two THF ligands. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3798–3803, 2003     

Butyltins in california river and lake marina waters

Butyltins were analyzed in waters from California river and lake marinas and were detected at the part per trillion (ppt) level in most locations. The tributyltin:dibutyltin (TBT/DBT) ratios in the fresh waters were similar to those in their saline counterparts indicating like rates of degradation in the two salinity regimes.     

Molecular weight dependence of diblock copolymer segregation at a polymer/polymer interface

Utilizing forward recoil spectrometry (FRES), we have determined the segregation isotherm which describes the interfacial excess z_i^* of diblock copolymers of poly (d₈-styrene-b-2-vinylpyridine) (dPS-PVP) at the interface between the homopolymers PS and PVP as a function of ?_∞, the volume fraction of diblock copolymer remaining in the host homopolymer. All the samples were analyzed after annealing at temperatures and times sufficient to achieve equilibrium segregation. The effect of the degree of polymerization of both the diblock copolymers and the host homopolymers on the segregation isotherm is investigated. When the degree of polymerization of the homopolymer is much larger than that of the diblock copolymer, the normalized interfacial excess (z_i^*/R_g), where R_g is the radius of gyration of an isolated block copolymer chain, is a universal function of that portion of the block copolymer chemical potential due to chain stretching. The existence of such a universal function is predicted by theory and its form is in good agreement with self-consistent mean field calculations. Using these results, one can predict important aspects of the block copolymer segregation (e.g., the saturation interfacial excess) without recourse to the time-consuming numerical calculations. © 1994 John Wiley & Sons, Inc.     

Crystallographic report: Bis[bis(N,N‐dibenzyldithiocarbamato)cadmium(II)]

The centrosymmetric structure of {Cd[S₂CN(CH₂Ph)₂]₂}₂ features both bridging and chelating dithiocarbamate ligands so that a square pyramidal S₅ coordination geometry results. Copyright © 2004 John Wiley & Sons, Ltd.     

Modeling elastic shells immersed in fluid

We describe a numerical method to simulate an elastic shell immersed in a viscous incompressible fluid. The method is developed as an extension of the immersed boundary method using shell equations based on the Kirchhoff‐Love and the planar stress hypotheses. A detailed derivation of the shell equations used in the numerical method is presented. This derivation, as well as the numerical method, uses techniques of differential geometry. Our main motivation for developing this method is its use in constructing a comprehensive, three‐dimensional computational model of the cochlea (the inner ear). The central object of study within the cochlea is the basilar membrane, which is immersed in fluid and whose elastic properties rather resemble those of a shell. We apply the method to a specific example, which is a prototype of a piece of the basilar membrane, and study the convergence of the method in this case. Some typical features of cochlear mechanics are already captured in this simple model. In particular, numerical experiments have shown a traveling wave propagating from the base to the apex of the model shell in response to external excitation in the fluid. © 2004 Wiley Periodicals, Inc.     

A two-echelon base-stock inventory model with Poisson demand and the sequential processing of orders at the upper echelon

We consider a two-echelon inventory system with a number of non-identical, independent ‘retailers’ at the lower echelon and a single ‘supplier’ at the upper echelon. Each retailer experiences Poisson demand and operates a base stock policy with backorders. The supplier manufactures to order and holds no stock. Orders are produced, in first-come first-served sequence, with a fixed production time. The supplier therefore functions as an M/D/1 queue. We are interested in the performance characteristics (average inventory, average backorder level) at each retailer. By finding the distribution of order lead time and hence the distribution of demand during order lead time, we find the steady state inventory and backorder levels based on the assumption that order lead times are independent of demand during order lead time at a retailer. We also propose two alternative approximation procedures based on assumed forms for the order lead time distribution. Finally we provide a derivation of the steady state inventory and backorder levels which will be exact as long as there is no transportation time on orders between the supplier and retailers. A numerical comparison is made between the exact and approximate measures. We conclude by recommending an approach which is intuitive and computationally straightforward.     

Charge density effects in salt‐free polyelectrolyte solution rheology

Solution rheology of 2‐vinyl pyridine and N‐methyl‐2‐vinyl pyridinium chloride random copolymers in ethylene glycol was studied over wide ranges of concentration and effective charge. The fraction of quaternized monomers α and the fraction of monomers bearing an effective charge f of these copolymers were measured using counterion titration and dielectric spectroscopy, respectively. Ethylene glycol is a good solvent for neutral poly(2‐vinyl pyridine), with very few ionic impurities. The viscosity η and relaxation time τ of dilute and semidilute unentangled solutions exhibit the scaling with concentration and effective charge expected by the Dobrynin model. Reduced viscosity data are independent of concentration in dilute solution, giving an intrinsic viscosity that depends on effective charge, and the experimental data obey the Fuoss law in the semidilute unentangled regime. Scaling concentration with the overlap concentration (c/c*) reduces these data to common curves, and c* ～ f ^?12/7 as predicted by the Dobrynin model, where f is the fraction of monomers bearing an effective charge. While the overlap concentration depends strongly on effective charge until counterion condensation occurs, the entanglement concentration c_e is surprisingly insensitive to effective charge, indicating that entanglement effects are not understood using the Dobrynin model. The terminal modulus G = η/τ depends only on the number density of chains G = ckT/N for c* < c < c_e, and G ～ c^3/2 for c > c_e independent of the effective charge. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2001–2013, 2006     

Encapsulation of ZnS:Mn2+ nanocrystals with diblock copolymers

The encapsulation of the nanocrystalline manganese‐doped zinc sulfide (ZnS:Mn) in poly(styrene‐b‐2vinylpyridine) (PS‐PVP) diblock copolymers is reported. Below the critical micelle concentration in the absence of nanocrystals (NCs), inverse micelles of PS‐PVP were induced by adding ZnS:Mn NCs, the presence of which was confirmed by scanning force microscope and dynamic light scattering. In toluene, a PS‐selective solvent, the less‐soluble PVP blocks preferentially surround the ligand‐coated ZnS:Mn NCs. For PS‐PVP encapsulated ZnS:Mn NCs, the ratio of blue emission to orange emission of ZnS:Mn NCs is dependent on both the concentration of PS‐PVP and the solvent quality. The pyridine of PVP blocks form complexes with the Zn atoms via the nitrogen lone pair and thus the sulfur vacancies are passivated. As a result, the defect‐related blue emission is selectively quenched even when the micelles are not formed. As the concentration of PS‐PVP encapsulating the ZnS:Mn NCs increases, the intensity of blue emission decreases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3227–3233, 2006     

Thermal conductivity, dislocation density and GaN device design

The performance of high power transistor devices is intimately connected to the substrate thermal conductivity. In this study, the relationship between thermal conductivity and dislocation density is examined using the 3 omega technique and free standing HVPE GaN substrates. Dislocation density is measured using imaging cathodoluminescence. In a low dislocation density regime below 10⁵ cm⁻², the thermal conductivity appears to plateau out near 230 W/K m and can be altered by the presence of isotopic defects and point defects. For high dislocation densities the thermal conductivity is severely degraded due to phonon scattering from dislocations. These results are applied to the design of homoepitaxially and heteroepitaxially grown HEMT devices and the efficiency of heat extraction and the influence of lateral heat spreading on device performance are compared.     

Stimulated emission of relativistic particles by external sources in spacetime

Explicit solutions are derived for transition amplitudes associated with stimulated emission of relativistic particles by external sources inspacetime. More precisely, exact expressions are obtained for transition amplitudes for any process where there are initially, at a given time, an arbitrary number of particles localized in various regions of space, prior to the switching on of an intervening source, and then, finally, at a later time when the intervening source ceases to operate, a given number of particles are found to be localized in various regions of space. The analysis is given for massive particles ofarbitrary integer and half-integer spins. The solutions are obtained by carrying out a unitarity expansion inconfiguration space, where particles travel between emitters and detectors in the presence of an intervening source. Considered as an application is the process: particlearbitrary number of particles, where the latter particles emerge spatially with a cone.