Atom transfer radical polymerization of methyl methacrylate by copper(I)‐pyridine‐2‐carboximidate catalysts

Pyridine‐2‐carboximidates [methyl ( 1a ), ethyl ( 1b ), isopropyl ( 1c ), cyclopentyl ( 1d ), cyclohexyl ( 1e ), n‐octyl ( 1f ), and benzyl ( 1g )] were prepared from the reaction of 2‐cyanopyridine with the corresponding alcohols. Cyclopentyl‐substituted 1d was found to be a highly effective ligand for copper‐catalyzed atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). For example, the observed rate constant for a CuBr/ 1d catalytic system was found to be nearly twice as high as the cyclohexyl‐substituted CuBr/ 1e catalytic system [k_obs = (1.19 vs 0.56) × 10^?4 s^?1). The effects of the solvents, temperature, catalyst/initiator, and solvent/monomer ratio on the ATRP of MMA were studied systematically for the CuBr/ 1d catalytic system. The optimum condition for the ATRP of MMA was found to be a 1:2:1:400 [CuBr]_o/[ 1d ]_o/[ethyl 2‐bromoisobutyrate]_o/[MMA]_o ratio at 60 °C in veratrole solution, which yielded well‐defined poly(MMA) with a narrow molecular weight distribution of 1.14. The catalytically active copper complex 2d was isolated from the reaction of CuBr with 1d . Narrow molecular weight distributions as low as 1.06 were achieved for the CuBr/ 1d catalytic system by employing 10% of the deactivator CuBr₂. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2747–2755, 2004     

Effect of the particle size distribution on the low shear viscosity of high‐solid‐content latexes

The production of high‐solid‐content, low‐viscosity latexes is an active field in both industry and academia. The viscosity of polymer dispersions has a clear dependence on the particle size distribution (PSD). An example is the rule of thumb that a bimodal PSD enables the reduction of the viscosity with respect to monomodal systems. Despite important progress in theoretical work, not much has been done to quantitatively predict the low shear viscosity of aqueous polymer dispersions as a function of the complex PSD. In this work, the capability of a low‐shear‐viscosity equation to quantitatively account for the influence of both the PSD and the physicochemical characteristics of the dispersions is experimentally assessed. An analysis, consistent with theoretical concepts, of the data with semiempirical correlations is proposed. Next, with values of the parameters of the viscosity equation obtained experimentally, the effect of a latex with a 70% solid content on the low shear viscosity is examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3936–3946, 2004     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Anticancer agent development: X-ray crystal structure and keto-enol tautomerism of dimethyl 1-hydroxy-6,7-methylenedioxy-4-(3′,4′,5′-trimethoxyphenyl-trans-3,4-dihydronaphthalene-2,3-dicarboxylate

Structural and conformational information obtained from the crystal structure and solution¹H nmr investigations of the title compound are compared. The 4-aryltetralone, C₂₄H₂₄O₁₀, crystallizes as a chloroform solvate in the monoclinic space group, P2₁/n, witha=12.519(4),b=17.938(6),c=12.534(9)Å,=111.90(5)°, and D_calc=1.51 g cm^–3 forZ=4. The data for this compound were collected at –150°C. Least-squares refinement of 2796 observed [F _o5(F _o)] reflections led to the final agreement index ofR=0.062. A threefold static disorder was observed for one of the carboxyl groups. The second carboxyl group participates in an intramolecular hydrogen bond and is thus ordered. The¹H nmr spectrum revealed the title compound to exist as a keto-enol tautomeric mixture in solution. Vicinal hydrogen coupling constant analysis proved reliable in ascertaining B-ring stereochemistry of 2,3-disubstituted-4-aryltetralones.     

Modeling of phase equilibrium and vapor adsorption on carbon black based on a combination of a lattice theory and equation of state

A thermodynamic approach is developed in this paper to describe the behavior of a subcritical fluid in the neighborhood of vapor-liquid interface and close to a graphite surface. The fluid is modeled as a system of parallel molecular layers. The Helmholtz free energy of the fluid is expressed as the sum of the intrinsic Helmholtz free energies of separate layers and the potential energy of their mutual interactions calculated by the 10-4 potential. This Helmholtz free energy is described by an equation of state (such as the Bender or Peng-Robinson equation), which allows us a convenient means to obtain the intrinsic Helmholtz free energy of each molecular layer as a function of its two-dimensional density. All molecular layers of the bulk fluid are in mechanical equilibrium corresponding to the minimum of the total potential energy. In the case of adsorption the external potential exerted by the graphite layers is added to the free energy. The state of the interface zone between the liquid and the vapor phases or the state of the adsorbed phase is determined by the minimum of the grand potential. In the case of phase equilibrium the approach leads to the distribution of density and pressure over the transition zone. The interrelation between the collision diameter and the potential well depth was determined by the surface tension. It was shown that the distance between neighboring molecular layers substantially changes in the vapor-liquid transition zone and in the adsorbed phase with loading. The approach is considered in this paper for the case of adsorption of argon and nitrogen on carbon black. In both cases an excellent agreement with the experimental data was achieved without additional assumptions and fitting parameters, except for the fluid-solid potential well depth. The approach has far-reaching consequences and can be readily extended to the model of adsorption in slit pores of carbonaceous materials and to the analysis of multicomponent adsorption systems.     

Speciation of arsenic and selenium compounds by ion-pair reversed-phase chromatography with electrothermic atomic absorption spectrometry. Application of experimental design for chromatographic optimisation

An off-line system is proposed consisting of ion-pair reversed-phase liquid chromatography, collections of fractions at the outflow of the column and furnace atomic absorption spectrometry. The so-called system allowed determination of both arsenic and selenium species mainly found in the environment and in mammals (arsenite, arsenate, monomethylarsonate, dimethylarsinate, selenite, selenate, selenocystamine, selenocystine, selenomethionine and selenoethionine). In order to study the retention behaviour of these compounds and to estimate the optimal conditions for the chromatographic separation, central composite designs were used to evaluate the influence of the eluent parameters such as pH, tetrabutylammonium phosphate (TBA) concentration and sodium hydrogenphosphate amounts. The retention factors of each species and the selectivity were established as response criteria. Response surfaces and isoresponse curves were drawn from the mathematical models and enabled one to determine the optimal conditions and to visualise the method robustness. The predicted optimal zone was situated at pH 5.5-6.5, 4.0 mM Na2HPO4 and 3.0-4.0 mM TBA. Regression models suggested linearity for the studied compounds in the range 25-200 microg selenium and arsenic per litre investigated.     

FT–IR spectroscopic study on the thermal and thermal oxidative degradation of nylons

The effects of heat and oxygen on nylon films were studied by FT–IR spectroscopy. Nylons 6, 66 and nylons containing carbonyl groups in either the diamine or the diacid moiety were prepared. Nylon films cast on aluminum were studied in an environmental chamber under controlled conditions. The progress of chemical and physical changes was monitored by FT–IR spectroscopy. Thermal energy caused largely an increase in crystallinity due to annealing and also an increase of nonhydrogen-bonded amide groups, which seemed to entail mainly amide groups from the amorphous region. The intensities of IR absorption bands related to the folded structure reduced as soon as heating began. The IR spectra of the carbonyl groups formed by thermal oxidation showed band shapes that indicated that the formed carbonyl groups were of many different origins. The presence of keto groups purposely inserted into the backbone chains increased the rate of oxidation. Pyrolysis of the nylons was also studied to supplement data obtained at lower temperatures.     

Conjugated enynes as a new type of substrates for olefin metathesis

[reaction: see text] It has been demonstrated for the first time that conjugated enynes can be employed as a facile substrate in olefin metathesis with the use of a bispyridine-substituted ruthenium benzylidene catalyst. Cross-metathesis of the enynes with alkenes turns out to proceed with preferential formation of (Z)-isomers over (E)-isomers up to >25:1 in moderate to good yields. The intramolecular version of conjugated enynes affords novel butadienyl cycloalkenes, which are a highly useful synthetic building blocks, in acceptable yields.     

Color centres in crystalline Lif films

Abstract

Policrystalline LiF thin films were produced on amorphous substrates at different temperatures. Preliminary optical measurements on F₂ and F₃ ⁺ aggregate color centres produced by electron irradiation were performed.