Enzymes immobilized on montmorillonite: comparison of performance in batch and packed-bed reactors

Summary The enzymes a-amylase, invertase and glucoamylase were immobilized on acid activated montmorillonite using two techniques, viz. adsorption and covalent binding, and their activities were tested in a batch and packed-bed reactor and were compared. The packed-bed reactor showed an improved performance for all immobilized enzymes, which was attributed to lowering of diffusional restrictions to mass transfer. Lower activity in case of batch reactor for immobilized invertase was due to a combined effect of loss of native conformation of enzyme on account of immobilization and mass transfer resistances due to improper diffusion of substrate to the active site of enzyme. For immobilized glucoamylase, the packed-bed reactor demonstrated exceptionally high activity that was very close to the free enzyme. Covalently bound glucoamylase showed higher activity than the free enzyme.     

Synthesis and liquid crystalline properties of new amide‐modified poly(1,4‐cyclohexanedimethylene terephthalate)

New series of cycloaliphatic poly(ester‐amide)s, poly(1,4‐cyclohexanedimethyleneterephthalate‐co‐1,3‐cyclohexanedimethylene terephthalamide), were synthesized through solution polymerization route. The compositions of ester/amide units in the copolymers were varied from 0 to 100% by varying the amount of 1,4‐cyclohexanedimethanol and 1,3‐cyclohexanebis(methylamine) in the feed. The structures of the polymers were confirmed by NMR and FTIR, and the molecular weights were determined by inherent viscosity. The composition analysis by NMR reveals that the reactivity of the diamine toward the acid chlorides is lowered than that of diol, which results in the formation of more ester content in the poly (ester‐amides). The thermal analysis indicate that the new poly(ester‐amide)s having less than 10 mol % of amide linkages are thermotropic liquid crystalline from 200 to 250 °C and a thread like nematic phases are observed under the polarizing microscope. WXRD studies suggest that the liquid crystalline domains promote the nucleation process in the polyester chains and increases the percent crystallinity of the poly(ester‐amide)s. The glass transition temperature of the copolymers initially increases with increase in amide units because of the presence of nematic phases and subsequently follows the Flory–Fox behavior. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 42–52, 2006     

Chemoselective thioacetalisation and transthioacetalisation of carbonyl compounds catalysed by tetrabutylammonium tribromide (TBATB)

Thioacetals and thioketals of various aldehydes and ketones were obtained directly from carbonyl compounds or by a transthioacetalisation process from cyclic O,O-acetals in the presence of dithiols and a catalytic amount of tetrabutylammonium tribromide (TBATB). Chemoselective thioacetalisation of aromatic aldehydes containing an electron-donating group in the presence of an aldehyde containing an electron-withdrawing group, aldehydes in the presence of ketones, aliphatic cyclic ketones in the presence of aromatic ketones and less hindered ketones in the presence of more hindered ketones have been achieved. A cyclic acetal containing an electron-donating group has been chemoselectively transthioacetalised in the presence of an acetal having an electron-withdrawing substituent. These selectivities are due to the intrinsic reactivity of the substrate themselves and are independent of the catalyst and reaction conditions. Shorter reaction times, mild reaction conditions, stability of acid sensitive protecting groups, high efficiencies, facile isolation of the desired products and the catalytic nature of the reagent are the attractive features of the present method.     

Complexometric determination of thorium in ThO2−PuO2

A method based on the complexometric titration of thorium using ethylene diaminetetra-acetic acid (EDTA) as complexant has been developed for the determination of thorium in thorium-plutonium solution without resorting to prior separation of plutonium. Plutonium in the form of Pu(VI) does not affect the thorium determination when present up to 10% in thorium—plutonium solution. For oxidation of plutonium to Pu(VI), HClO₄ or AgO was used. HClO₄ is preferred. The thorium values obtained without prior separation of plutonium are compared with those obtained after separating plutonium by anion exchange technique. A precision of ±0.5% has been obtained for 5–10 mg of thorium in the aliquot.     

Crystal and molecular structure of pyrrolidine dithio carbamate cobalt (III) chelate

Pyrrolidine dithio carbamate (pdtc) cobalt(III) chelate has been used as a coprecipitation matrix for obtaining preconcentration factors of 100 or more for analytical estimation of trace metals in natural waters. This chelate, suitable for bivalent and trivalent ions, crystallizes as dark green crystals in monoclinic space group C2/c with unit cell parametersa = 28.89 ?,b = 14.39 ?,c = 16.17 ? andΒ = 104.2‡. X-ray crystallographic analysis of these crystals reveals that threepdtc are coordinated to a Co ₀ ^{3 +} atom through their sulphur atoms, the six sulphur atoms forming a distorted octahedra around the metal atom at an average distance of 2.26 ?. The thiocarbamate part of the ligands is nearly planar but the pyrrolidine rings are puckered.     

A molecular beam study of the NO + CO reaction on Pd(111) surfaces

Nitric oxide (NO) reduction with carbon monoxide (CO) on the Pd(111) surface was studied under isothermal conditions by molecular beam techniques as a function of temperature, NO:CO beam composition, and beam flux. Systematic experiments were performed under transient and steady state conditions. Displacement of adsorbed CO by NO in the transient state of the reaction was observed at temperatures between 375 and 475 K for all the NO:CO compositions studied. NO accumulation occurs on Pd(111) surface under steady state conditions, below 475 K, due to stronger chemisorption of NO. The steady state reaction rates attain a maximum at about 475 K, nearly independent of beam composition. N2 was found to be the major product of the reduction, along with a minor production of N2O. The production of N2 and N2O indicates molecular and dissociative adsorption of NO on Pd(111) at temperatures up to 525 K. Postreaction TPD measurements were performed in order to determine the nitrogen coverage under steady-state conditions. Finally, the results are discussed with respect to the rate-controlling character of the different elementary steps of the reaction system.     

Tetrabutylammonium tribromide (TBATB)-MeOH: An efficient chemoselective reagent for the cleavage of tert-butyldimethylsilyl (TBDMS) ethers

TBDMS, THP, and DMT ethers are efficiently deprotected with tetrabutylammonium tribromide in methanol. The apparent order of stability of different protecting group is phenolic TBDMS > 1 degrees OTBDPS > 2 degrees OTBDMS > 2 degrees OTHP > 1 degrees OTHP > 1 degrees OTBDMS > 1 degrees ODMT. TBDMS ether has been cleaved selectively in the presence of isopropylidine, Bn, Ac, Bz, THP, and TBDPS groups. This method is high yielding, fast, clean, safe, cost-effective, and therefore most suitable for practical organic synthesis.     

Thermodynamic Properties of Crystalline Cellulose Allomorphs Studied with Dispersion-Corrected Density Functional Methods

The phonon properties and thermodynamics of four crystalline cellulose allomorphs, Iα, Iβ, II, and III1, have been investigated using dispersion-corrected density functional theory (DFT). In line with experimental findings, the free energy differences between the studied cellulose allomorphs are small, less than 1 kJ/mol per atom. The calculated specific heat at constant volume (Cv) has been compared with the available experimental data in the temperature range 10–300 K. Quasiharmonic approximation has been employed to study thermodynamics and specific heat at constant pressure (Cp). For the studied temperature range of 10–400 K, the specific heat of all cellulose allomorphs shows very similar behavior. The calculated and experimental specific heat agree well at low temperatures below 100 K, but the deviation between theory and experiment increases with temperature. This may be due to increasing phonon anharmonicity as the temperature increases.     

From symmetry breaking to symmetry swapping: is Kasha's rule violated in multibranched phenyleneethynylenes?

The phenomenon of excited-state symmetry breaking is often observed in multipolar molecular systems, significantly affecting their photophysical and charge separation behavior. As a result of this phenomenon, the electronic excitation is partially localized in one of the molecular branches. However, the intrinsic structural and electronic factors that regulate excited-state symmetry breaking in multibranched systems have hardly been investigated. Herein, we explore these aspects by adopting a joint experimental and theoretical investigation for a class of phenyleneethynylenes, one of the most widely used molecular building blocks for optoelectronic applications. The large Stokes shifts observed for highly symmetric phenyleneethynylenes are explained by the presence of low-lying dark states, as also established by two-photon absorption measurements and TDDFT calculations. In spite of the presence of low-lying dark states, these systems show an intense fluorescence in striking contrast to Kasha''s rule. This intriguing behavior is explained in terms of a novel phenomenon, dubbed “symmetry swapping” that describes the inversion of the energy order of excited states, i.e., the swapping of excited states occurring as a consequence of symmetry breaking. Thus, symmetry swapping explains quite naturally the observation of an intense fluorescence emission in molecular systems whose lowest vertical excited state is a dark state. In short, symmetry swapping is observed in highly symmetric molecules having multiple degenerate or quasi-degenerate excited states that are prone to symmetry breaking.

Highly symmetric multibranched phenyleneethynylenes exhibit intense fluorescence despite the presence of low-lying dark states. The inversion of the energy order of excited states is explained in terms of a novel phenomenon dubbed “symmetry swapping”.