Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Carbonyl allylations by 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide

2-Propenyl tin species, prepared from 3-halopropenes or 2-propenyl mesylate with tin(IV) chloride and tetrabutylammonium iodide in dichloromethane, causes nucleophilic addition to aldehydes to produce the corresponding homoallylic alcohols.     

Purification and characterization of gamma-enolase from various mammals.

The gamma subunit of enolase (gamma-enolase) was purified from the brain tissues of cow, dog, goat, pig, rabbit, and rat. The purification was achieved in only three steps: ammonium sulfate-precipitation, DE 53 cellulose ion-exchange chromatography, and polyacrylamide gel electrophoresis (PAGE) in a preparative mode. The purification procedure was comparatively more simple than previously reported methods, and the yield of gamma-enolase was sufficient for subsequent structural and immunological analyses. In all mammals, the purified gamma-enolase migrated in sodium dodecyl sulfate-PAGE (SDS-PAGE) with a molecular mass of 46 kilodaltons (kDa), and the immunological cross-reactivity between those gamma-enolases was very strong. The structural homology of these gamma-enolases was examined by peptide mapping using cyanogen bromide cleavage and subsequent two-dimensional electrophoresis. The resulting peptide patterns were highly similar and in cow, dog, and goat, the patterns were almost identical. These results indicate that structural homology, that is, the species non-specificity of gamma-enolase, appears to be very high.     

Expression of a restricted fragment of staphylococcal tetracycline resistance determinant as a fused product in Escherichia coli

Tetracycline resistance (TcR) plasmid pNS1, a deletion derivative constructed from staphylococcal plasmid pTP5, carries a tet determinant which specifies a TcR protein (TET) with a molecular weight of 50 kilodaltons (kDa). In order to express the pNS1-encoded TET as a fused product, a 0.8 kilobase pairs fragment containing 57.1% of tet determinant was inserted into a chloramphenicol resistance determinant. From the nucleotide sequence, it is deduced that the fusion protein (designated CAT'-TET') is a 53 kDa protein composed of 472 amino acids in which the 199 and 262 amino acids are derived from CAT and TET, respectively. Although the molecular weight of CAT'-TET' obtained from the result of sodium dodecyl sulfate polyacrylamide gel electrophoresis (42 kDa) was not in agreement with its predicted weight (53 kDa), the ratio of TET' segment to the fusion protein (22 kDa/42 kDa) corresponded almost exactly to that deduced from the nucleotide sequence (29 kDa/53 kDa). The expression of CAT'-TET' in Escherichia coli caused a rapid decrease in growth rate and in the number of viable cells. This result is thought to be due to the toxic effect of CAT'-TET' on the cell membrane.     

Ni-catalyzed alkylative dimerization of vinyl grignard reagents using alkyl fluorides

Alkyl halides underwent unique cross-coupling reaction with vinylmagnesium chloride in the presence of Ni catalyst to give 2-alkyl-3-butenyl Grignard reagent (1) in high yields. This reaction proceeded efficiently at 25 degrees C in THF using primary and secondary alkyl fluorides. On the other hand, PhCH=CHMgBr gave double alkylative vinyl coupling product 4 in good yield as the sole coupling product. Alkyl fluorides react as the most suitable alkylating reagent in comparison to the corresponding chlorides, bromides, and iodides.     

Chromatographic molecular recognition for catechol-related compounds using thiacalix[4]arene as an effective selector

Thiacalix[4]arene (5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrahydroxy-2,8,14,20-tetrathiacalix[4]arene) is an amphiphilic molecule comprising four p-tert-butylphenol-like groups ortho-linked by single sulfur atoms. This molecule has a high electron density area owing to the close proximity of the hydroxyl groups and sulfur atoms. We studied the applicability of this interesting compound as a selector for high-performance liquid chromatography (HPLC) thereby presumably exploiting this feature. Firstly, uniformly sized polymer particles were prepared by using a multi-step swelling and polymerization method with ethylene glycol dimethacrylate (EDMA) as a cross-linker. Methacrylic acid (MAA) was introduced onto the surface of the resulting polymer particles through a new modification method. Thiacalix[4]arene was chemically bonded through the MAA group by using 1,4-dibromobutane as a spacer to reduce steric hindrance around the MAA and the polymer particle itself. The performance of the prepared polymer-based thiacalix[4]arene-modified stationary phase was evaluated with HPLC. Specific chromatographic retention behavior was observed for catechol relative to positional isomers of xylene, cresol, and benzene-diol. Catecholamine and catechol showed specific chromatographic retention behavior.     

Reductive metabolism of nitro-p-phenylenediamine by rat liver

Reductive metabolism of the hair dye constituent, nitro-p-phenylenediamine (2-nitro-1,4-diaminobenzene, NPDA), and its acetylated metabolite, NPDA N4-acetate, was investigated with rat liver subcellular fractions, microsomes and cytosol. Under anaerobic conditions, these compounds were reduced to their corresponding amines by these fractions. The microsomal nitro-reducing activity was retarded completely by air and strongly by carbon monoxide. Reduced nicotinamide adenine dinucleotide phosphate (NADPH) functioned more effectively than reduced nicotinamide adenine dinucleotide (NADH) as an electron donor in the microsomal reduction of the nitro compounds, and flavin mononucleotide (FMN) gave rise to a marked enhancement in the microsomal activity, especially when added to an anaerobic incubation mixture containing both NADH and NADPH. The cytosolic nitro-reducing activity was attributed to xanthine oxidase, aldehyde oxidase and other unknown enzyme(s), based on the results of cofactor requirements and inhibition experiments.     

Power of isotopic fine structure for unambiguous determination of metabolite elemental compositions: In silico evaluation and metabolomic application

In mass spectrometry (MS)-based metabolomics studies, reference-free identification of metabolites is still a challenging issue. Previously, we demonstrated that the elemental composition (EC) of metabolites could be unambiguously determined using isotopic fine structure, observed by ultrahigh resolution MS, which provided the relative isotopic abundance (RIA) of ¹³C, ¹⁵N, ¹⁸O, and ³⁴S. Herein, we evaluated the efficacy of the RIA for determining ECs based on the MS peaks of 20,258 known metabolites. The metabolites were simulated with a ≤25% error in the isotopic peak area to investigate how the error size effect affected the rate of unambiguous determination of the ECs. The simulation indicated that, in combination with reported constraint rules, the RIA led to unambiguous determination of the ECs for more than 90% of the tested metabolites. It was noteworthy that, in positive ion mode, the process could distinguish alkali metal-adduct ions ([M + Na]⁺ and [M + K]⁺). However, a significant degradation of the EC determination performance was observed when the method was applied to real metabolomic data (mouse liver extracts analyzed by infusion ESI), because of the influence of noise and bias on the RIA. To achieve ideal performance, as indicated in the simulation, we developed an additional method to compensate for bias on the measured ion intensities. The method improved the performance of the calculation, permitting determination of ECs for 72% of the observed peaks. The proposed method is considered a useful starting point for high-throughput identification of metabolites in metabolomic research.     

Determination of the scattering coefficient of biological tissue considering the wavelength and absorption dependence of the anisotropy factor

The anisotropy factor g, one of the optical properties of biological tissues, has a strong influence on the calculation of the scattering coefficient μ _s in inverse Monte Carlo (iMC) simulations. It has been reported that g has the wavelength and absorption dependence; however, few attempts have been made to calculate μ _s using g values by taking the wavelength and absorption dependence into account. In this study, the angular distributions of scattered light for biological tissue phantoms containing hemoglobin as a light absorber were measured by a goniometric optical setup at strongly (405 nm) and weakly (664 nm) absorbing wavelengths to obtain g. Subsequently, the optical properties were calculated with the measured values of g by integrating sphere measurements and an iMC simulation, and compared with the results obtained with a conventional g value of 0.9. The μ _s values with measured g were overestimated at the strongly absorbing wavelength, but underestimated at the weakly absorbing wavelength if 0.9 was used in the iMC simulation.