Molecular weight dependence of diblock copolymer segregation at a polymer/polymer interface

Utilizing forward recoil spectrometry (FRES), we have determined the segregation isotherm which describes the interfacial excess z_i^* of diblock copolymers of poly (d₈-styrene-b-2-vinylpyridine) (dPS-PVP) at the interface between the homopolymers PS and PVP as a function of ?_∞, the volume fraction of diblock copolymer remaining in the host homopolymer. All the samples were analyzed after annealing at temperatures and times sufficient to achieve equilibrium segregation. The effect of the degree of polymerization of both the diblock copolymers and the host homopolymers on the segregation isotherm is investigated. When the degree of polymerization of the homopolymer is much larger than that of the diblock copolymer, the normalized interfacial excess (z_i^*/R_g), where R_g is the radius of gyration of an isolated block copolymer chain, is a universal function of that portion of the block copolymer chemical potential due to chain stretching. The existence of such a universal function is predicted by theory and its form is in good agreement with self-consistent mean field calculations. Using these results, one can predict important aspects of the block copolymer segregation (e.g., the saturation interfacial excess) without recourse to the time-consuming numerical calculations. © 1994 John Wiley & Sons, Inc.     

Encapsulation of ZnS:Mn2+ nanocrystals with diblock copolymers

The encapsulation of the nanocrystalline manganese‐doped zinc sulfide (ZnS:Mn) in poly(styrene‐b‐2vinylpyridine) (PS‐PVP) diblock copolymers is reported. Below the critical micelle concentration in the absence of nanocrystals (NCs), inverse micelles of PS‐PVP were induced by adding ZnS:Mn NCs, the presence of which was confirmed by scanning force microscope and dynamic light scattering. In toluene, a PS‐selective solvent, the less‐soluble PVP blocks preferentially surround the ligand‐coated ZnS:Mn NCs. For PS‐PVP encapsulated ZnS:Mn NCs, the ratio of blue emission to orange emission of ZnS:Mn NCs is dependent on both the concentration of PS‐PVP and the solvent quality. The pyridine of PVP blocks form complexes with the Zn atoms via the nitrogen lone pair and thus the sulfur vacancies are passivated. As a result, the defect‐related blue emission is selectively quenched even when the micelles are not formed. As the concentration of PS‐PVP encapsulating the ZnS:Mn NCs increases, the intensity of blue emission decreases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3227–3233, 2006     

Nachweise verwandter Elemente nebeneinander in einem Tropfen. II. Mitteilung: Der mikrochemische Nachweis von Aluminium und Beryllium mittels Ammoniummolybdats

Zusammenfassung Entgegen den Auffassungen von van Zijp über den von ihm veröffentlichten Nachweis des Aluminiums mit Ammoniummolybdat wurde gezeigt, daß ein derartiger Nachweis Empfindlichkeit und Störungsfreiheit in hohem Grade vereint.Der Nachweis durch Ammoniummolybdat konnte auf Beryllium ausgedehnt werden. Eine Reihe von Versuchen zeigte, daß Aluminium- und Berylliummolybdat in zwei verschiedenen Krystallformen ohne gegenseitige Beeinträchtigung selbst nebeneinander auszukrystallisieren vermögen.Es ist mir eine angenehme Pflicht, Herrn Prof. Dr. Wilhelm Böttger für sein stets färderndes Interesse und für die mikrochemische Arbeitsmäglichkeit überhaupt zu danken. Zu Dank verpflichtet bin ich auch der Fa. Otto Perutz, München für die freundliche überlassung von Pervola-Platten zu den Mikrophotographien.     

Mechanism of vinyl chloride polymerization

An overall mechanistic scheme for the suspension polymerization of vinyl chloride is presented. The process can be resolved into five discrete stages, each of which presents a unique environment for the interaction of the systems parameters. It is shown that the surface area of the polymer formed during the reaction is not a major factor in autoacceleration and that the increase of kinetic chain length with conversion is due to a radical dilution effect. The latter is a direct result of the difference in rates between polymerization and radical formation, the former being greater. The increase of the initial polymerization rate and the reduction of autoacceleration brought about by chain transfer agents can be explained by the lower diffusion rate and greater bulkiness of the chain transfer agent radical relative to that of the monomer radical. The chaintransfer agent CBr₄ is preferentially absorbed by PVC from solution in vinyl chloride. With lauryl peroxide as initiator it is shown that the “hot spot” is the result of a build-up of initiator in the monomer caused by its exclusion from the polymer phase. Vinyl chloride was found to dissolve 0.03% PVC at ambient temperature and to have no effect on the decomposition rate of lauryl peroxide.     

Peroxides of higher aliphatic ethers

The oxidation of higher aliphatic ethers with oxygen at 50° yields two peroxides as the main oxidation products for each ether, namely a dihydroperoxy-dialkyl ether and a dihydroperoxy-dialkyl peroxide. The mass spectra of these compounds are recorded and the main fragmentation pattern is discussed.     

The flame photometric determination of calcium in phosphate,carbonate, and silicate rocks

A flame photometric method of determining calcium in phosphate, carbonate, and silicate locks has been developed Aluminum and phosphate interference was overcome by the addition of a large excess of magnesium. The method is rapid and suitable for routine analysis Results obtained are within ± 2% of the calcium oxide content.     

INCREASED QUANTUM YIELD OF PHOTOREDUCTION OF DYES (A CATALYTIC EFFECT)

Abstract— While studying the photoreduction of some dyes (D) by reducing agents (R), it was observed that the quantum yield of the photoreduction increases considerably upon addition of a third substance (C), whereas it is very small when the dye is photoreduced by C alone (catalytic effect), (see Table 1).
The system thionine (D), allylthiourea (R), and azulene (C) was investigated in detail using both flash photolysis and continuous illumination. On photolysis, thionine is converted into its photo-reduced form, leucothionine. Azulene reacts with the basic form of the thionine triplet ³ TH ⁺ to produce the semithionine radical. In the system thionine and azulene, most of these radicals revert back to thionine. When ATU (˜ 10^2- M ) is added to thionine and azulene (3 × 10^-4 M ), the semithionine radicals are reduced to leucothionine; the quantum yield of this reduction is considerably higher than in the system thionine and allylthiourea. Flash experiments demonstrate that allylthiourea does not react with the semithionine radicals.
At very high ATU concentrations (≥ 10^-1 M ), however, the primary reaction is between thionine triplet and allylthiourea; under these conditions the quantum yield is not influenced by azulene (3 × 10^-4 M ).     

Four-jet production in e+e−-annihilation

We investigate the four-jet production processes $e^{+}{e}^{?}\to q\overline{q}ggand{e}^{+}{e}^{?}\to q\overline{q}q\overline{q}$ in lowest order QCD perturbation theory. We estimate that four-jet events should be detectable at a rate of about 5% at the highest PETRA energy. The acoplanarity distribution is calculated and compared to nonperturbative effects.