Determination of in-core power in low energy research reactors by measurement of16N and18F in the primary coolant

The measurement of¹⁶N and¹⁸F activity in the primary coolant of the JASON Argonaut reactor has been used to monitor in-core reactor power. The¹⁶N is produced by the¹⁶O(n, p)¹⁶N reaction and the 6.1 MeV photopeak was measured on-line using a BGO detector adjacent to the primary coolant circuit. These data provided a relative measure of power stability during steady state operation and a measure of linearity at different power levels. The¹⁸F is produced in the primary coolant by the¹⁸O(p, n)¹⁸F reaction and aliquots of primary coolant were sampled from the reactor dump tank for off-line radiochemical analysis. The¹⁸F was separated as trimethylfluorosilane and the activity was determined by measurement of the 0.511 MeV annihilation photopeak using a NaI(TI) detector. The measured¹⁸F activity was used to determine actual in-core reactor power using both ab-initio calculations and by comparison of results with a calibrated power reactor. The¹⁸F data also provided a method of nomalising the¹⁶N data for direct monitoring of in-core reactor power in JASON.     

Molecular potential-energy surfaces for chemical reaction dynamics

This paper reviews the construction of molecular potential-energy surfaces by an interpolation method which has been developed over the last several years. The method uses ab initio quantum chemistry calculations of the molecular electronic energy in an automated procedure to construct global potential- energy surfaces which can be used to simulate chemical reactions with either classical or quantum dynamics. The methodology is explained and several applications are presented to illustrate the approach. Received: 22 February 2002 / Accepted: 2 May 2002 / Published online: 6 November 2002 Correspondence to: M. A. Collins e-mail: collins@rsc.anu.edu.au Acknowledgements. The methods described in this overview are the result of collaborations with former members of my group, in particular with Josef Ischtwan, Meredith Jordon, Keiran Thompson and Ryan Bettens. I am also indebted for inspiration gained from many discussions with my colleagues Leo Radom and Donghui Zhang (National University of Singapore). This work has been supported by the Supercomputer Facility of the Australian National University and the Australian Partnership for Advanced Computing.     

The composition of the evolved gases from the thermal decomposition of certain metal sulfates

By the use of TG—MS, the thermal dissociation of anhydrous CuSO₄ and Al₂(S0₄)₃ was found to proceed according to the reactions:

followed by the reactions:

No SO₃ was indicated in the dissociation of alunite. The sulfate ion appears to dissociate by at least two different mechanisms although the parameter which controls the mechanisms has not been elucidated.     

Evaluation of new single crystal piezoelectric materials for surface acoustic-wave applications

Surface acoustic waves (SAW), or Rayleigh waves, bound to the surfaces of piezoelectric materials are becoming rapidly significant in electronic device applications, particularly as VHF-UHF frequency filters and versatile time-domain processors. The majority of available devices utilize either signle crystalline quartz or lithium niobate as the piezoelectric medium. This paper describes briefly the growth and critical evaluation of SAW impedance and propagation properties for certain new single crystal piezoelectric materials. Crystals discussed are Czochralski-grown bismuth germanium oxide, films of zinc oxide and aluminum nitride both epitaxially grown on single crystal sapphire, and flux-grown beryllium oxide. It is concluded that bismuth germanium oxide may prove an important cost-effective alternative to both quartz and lithium niobate, and that either zinc oxide or aluminum nitride is destined to prove invaluable in the realization of monolithic circuits such as programmable tapped delay lines, in which SAW will be interfaced with metal-oxide semiconductor (large scale integrated) technology, and active SAW elements employing functional integration.     

Tandem (quadrupole-time-of-flight) electrospray mass spectrometry of oligo(vinyl acetates) with isopropylol or (1-hydroxyethyl)-2-oxyisopropanyl end groups

Poly(vinyl acetates) with either isopropylol or (1-hydroxyethyl)-2-oxyisopropanyl end groups were analysed by tandem mass spectrometry using a quadrupole-time-of-flight (Q-TOF) instrument. Random scission along the polymer backbone was not observed. Instead the initial scissions were derived from the cleavage of end-group species. The resultant macrocations were subject to further elimination reactions that eventually produced polyene macrocations. A smaller fraction of the initial macrocations also reacted by loss of ketene and this reaction produced macrocations containing vinyl alcohol units.     

Mass spectrometry of hop compounds—III. Mass spectra of substituted 1,3-cyclopentanediones derived from hop constituents

The mass spectra of isohumulones (IV, V), tetrahydroisocohumulones (VI, VII), tetrahydroisohumulones (VIII) neohydroisocohumulones (XI, XII) cohumulinic acid (III), lupuloxinic acid (XV), humulinone (XIV) and related compounds are described. Ions which appear to be diagnostic for particular structures are discussed.     

Interpolation of diabatic potential energy surfaces

A method is presented for constructing diabatic potential energy matrices from ab initio quantum chemistry data. The method is similar to that reported previously for single adiabatic potential energy surfaces, but correctly accounts for the nuclear permutation symmetry of diabatic potential energy matrices and other complications that arise from the derivative coupling of electronic states. The method is tested by comparison with an analytic model for the two lowest energy states of H(3).     

Effects in high-performance liquid chromatography of a high pH in the mobile phase on poly(methyloctylsiloxane) immobilized by gamma-radiation on titanium-grafted silica

Effects of high-pH environments on a stationary phase prepared by gamma-radiation immobilization of poly(methyloctylsiloxane) on titanium-grafted silica were investigated by HPLC testing with standard sample mixtures. The HPLC parameters indicate good stationary phase stability to 10000 column volumes each of mobile phases with pH of 7, 9 and 12. At pH 13, the efficiency decreases slowly, although reasonably good separations are still possible until increasing flow resistance no longer allows easy passage of the mobile phase.     

A study of methods for moving particles in RF processing plasmas

Methods for moving charged particles in RF processing plasmas are investigated. These methods include varying RF power, varying chamber pressure, attraction and repulsion by an electrostatic probe, and movement with magnetic fields. Varying RF power changes the depth of the potential wells where particles are trapped. The RF power affects shape and location of the traps and the bulk plasma potential. Increasing the chamber pressure moves the sheath edge closer to the wafer being processed. Since particle traps are found at the plasma sheath edge increasing the chamber pressure will move the particle traps (and any trapped particles) closer to the wafer being processed. The Langmuir probe can repel particles when under negative bias and attract them when positively biased. This probe can also distort the sheath edge when the tip resides within the sheath. Applying a magnetic field can change the characteristics of the particle traps and produce a force on the charged dust particles