Synthesis,characterization, and curing kinetics of novel ladder‐like polysilsesquioxanes containing side‐chain maleimide groups

Two ladder‐like polysilsesquioxanes (LPS) containing side‐chain maleimide groups have been synthesized successfully by reacting N‐(4‐hydroxyphenyl)maleimide (HPM) with LPS containing 100 mol % of chloropropyl groups (Ladder A ) and 50 mol % of each methyl and chloropropyl group (Ladder B ). HPM was synthesized by reacting maleic anhydride with 4‐aminophenol, and the resulting amic acid was imidized using p‐toluenesulfonic acid as a catalyst (Scheme 1 ). The LPSs were characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), proton‐decoupled ¹³C NMR, ²⁹Si NMR, wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Characterization indicated that these polymers had ordered ladder‐like structures with possible defects. These polymers were soluble in common solvents at ambient temperature, which suggested that they were not crosslinked. Both the polymers and the HPM were cured, and their kinetics were followed by dynamic DSC. The Ozawa and Kissinger methods were used to calculate activation energies for curing. Curing increased the temperature at which both 5% weight loss and maximum rate of weight loss were observed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4036–4046, 2004     

Nouvelle méthode de dosage automatique de substances oxydantes ou réductrices par potentiométrie différentielle : Partie I. Étude théorique

A new method is proposed for routine determinations of oxidizable and reducible substances. A mathematical development and criticism of the method of Schierjott has led to a fundamental modification of the earlier experimental conditions (ratio of the oxidized/reduced forms of the reagent at the start and end of the redox reaction). This improvement allows a considerable increase in the sensitivity of the method and is particularly advantageous for the determination of substances of low reactivity, e.g. carbohydrates. Other advantages are a reduction in the quantity and thus cost of the necessary reagent, and a decreased risk of precipitation of the substances involved. The mathematical treatment of the proposed version allows a rigorous theoretical comparison of the two methods. An evaluation of the quality of the approximations introduced into both methods is also proposed, based on the calculation of the deviation (absolute and relative differences) of approximated values from theoretical values. The final part of the work deals with optimization of the different principal parameters, i.e. concentration of the reagent, temperature and reaction time.     

19F NMR chemical shifts of n-F-alkyl compounds

The examination of ¹⁹F chemical shifts for ca. 650 F-alkylated compounds of general formula CF₃(CF₂)_nCF₂X led to the following conclusions: the CF₂ groups α to X are very sensitive to the nature of X, and are spread over a range of 85 ppm. The effect of the length of the F-alkyl chain decreases rapidly, so that δCF₂(α) can already be considered as characteristic of X for n = 1 or 2 for most practical purposes. Solvent effects (in 9 different solvents having ε = 1.8 to 52.1) were found to be rather small except for the F-alkyl iodides. A chart which indicates the domain in which the CF₂(α) resonance signal is to be expected is given for 42 different series of F-alkylated compounds; it is expected to provide the synthetic chemist with a useful tool for the identification and characterization of such compounds.     

Fluorous Synthesis of Biaryl-Substituted Proline Analogs by 1,3-Dipolar Cycloaddition and Suzuki Coupling Reactions

A solution-phase synthesis of bicyclic prolines containing four points of diversity has been developed by a two-step synthesis involving 1,3-dipolar cycloaddition of perfluoroalkylsulfonyl-protected hydroxybenzaldehydes followed by Pd-catalyzed Suzuki coupling reaction of fluorous sulfonates with boronic acids. Both reactions are conducted under microwave irradiation and reaction mixtures are purified by solid-phase extractions without performing chromatography.     

Bivoltametric titrations using electrodes with innovative geometry

Electrodes with different surface areas were investigated for the determination of reversible, quasireversible, irreversible or electroinactive substrates. Two kinds of electrodes were constructed, a helical electrode with a given asymmetry and a platinum array electrode with a variable area. These electrodes were applied for the cerimetry of ammonium iron(II) sulfate and for the bromatometry of various organic substances. The theoretically derived effects on the shape of the voltametric titration curve are verified experimentally. It is possible to sharpen one side of the peak and to broaden the other side, depending on the system and the side of the peak one is interested in. It is possible to improve the bivoltametric determination of hydroquinone, benzocaine and sulfaguanidine by bromatometry by the directed employment of electrodes of different areas. For the bromatometric determination of electrochemically irreversible substrates the use of the electrode geometries proposed is a way to obtain a sharp bend and a steep decrease of titration curves with low values of the constant current which is a basic requirement for the accuracy.     

MgCl2 Enhances Cluster Formation by Nanoscale Toroidal DNA Condensates

Multivalent cations can cause DNA to condense from its extended state in solution into high-density toroid-shaped particles. Developing methods to control the size and size distribution of DNA toroids is an important goal for the development of artificial gene delivery systems. Here we demonstrate that changes in salt conditions, prior to condensation by multivalent cations, can significantly affect DNA condensation. Specifically, millimolar concentrations of MgCl₂ are shown to cause the formation of toroid clusters, whereas NaCl at the same ionic strength does not.     

Neutral and ionic aluminum,gallium, and indium compounds carrying two or three terminal ethynyl groups

The syntheses of the ionic compounds [Li(+).2 dioxane (2,6-iPr(2)C(6)H(3)N(SiMe(3))Al(C triplebond CSiMe(3))(3))(-)].0.75 dioxane (1), [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))Ga(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (2), and [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))In(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (3) by the reaction of the corresponding organo metal chloride with LiC triplebond CSiMe(3) are reported. The neutral ethynyl compounds Br-Al(C triplebond CtBu)(2).2 THF (4), Cl-Ga(C triplebond CtBu)(2).THF (5), Cl-In(C triplebond CtBu)(2).2 THF (6), Al(C triplebond CtBu)(3).C[N(Me)CMe](2) (7), Ga(C triplebond CtBu)(3).dioxane (8), and In(C triplebond CtBu)(3).NEt(3) (9) have been obtained in good yields from the reaction of AlBr(3), GaCl(3), and InCl(3) with LiC triplebond CtBu in the presence of a Lewis base. Compound 7 is the first heterocyclic carbene substituted ethynyl derivative. Aluminum and gallium compounds with three terminal ethynyl groups Al(C triplebond CPh)(3).NMe(3) (10) and Ga(C triplebond CPh)(3).NMe(3) (11) have been prepared by the reaction of AlH(3).NMe(3) or GaH(3).NMe(3) with three equivalents of phenylethyne. All the above-mentioned compounds have been structurally studied. In compound 1 the lithium ion is coordinated to the three terminal ethynyl groups, whereas in compounds 2 and 3 the lithium is coordinated to the solvent (dioxane). Compound 8 crystallizes as a coordination polymer with dioxane molecules bridging the individual gallium units.     

Nouvelle methode de dosage du gaz carbonique dans les produits alimentaires et application au fromage

The determination of carbon dioxide in food products with particular application to cheese Samples are emulsified under reduced pressure in an alkaline citrate medium in an airtight mixer and CO₂ is quantitatively displaced into the head space by addition of an excess of sulphuric acid. A small gas pump ensures gas circulation to a specific nondispersive infrared detector mounted in a by-pass for measurement. The residual depression in the head space is suppressed shortly before measuring. The equipment is calibrated with standard gases and standard additions of sodium carbonate. The method is sufficiently simple and rapid for routine use (about 30 samples/day). The coefficient of variation is less than 1% for standard solutions and less than 2% for cheese. The matrix has practically no influence on the accuracy of the measurements.     

Action des perfluoroalkylcuivre(I) sur les perfluoroalkylethylenes

A series of new polyfluorinated dienes 3, containing the novel -CFCHCHCF-, pattern has been synthesized (50–70% yields) by reacting perfluoroalkyl iodides with perfluoroalkyl-ethylenes in the presence of copper. The monoalkenes R_fCFCHCH₂CF₂R′_f and the saturated compounds R_fCF₂CH₂CH₂CF₂R′_f were obtained by varying the experimental conditions. The ¹H and ¹⁹F NMR spectra are analysed and the reaction mechanism is discussed.