Synthesis of potential inhibitors of glycosyltransferases representing UDP-GlcNAc

Based on rational design of the transition state analog inhibitors of glycosyltransferases, four model glycomimetics of this type, viz. benzyl 2-thio-α-dfructofuranoside 1-diethylphosphate (XIa), its β-anomer (XIb), and their ethyl 2-thio analogs — α-anomer (XIIa) and β-anomer (XIIb), were synthesized. In addition, fourteen precursors arising during the synthesis of the desired final model compounds (XI and XII), partially or fully acetylated benzyl and/or ethyl 2-thiofructofuranoside 1-diethyl phosphates, were isolated and characterized with the aim to prepare complete series of glycomimetics, representing donor UDP-GlcNAc designated for biological assays on human GnT’s, viz. GnT-I, Core2GnT, and GnT-V.     

Robust model-based predictive control of exothermic chemical reactor

A case study of the robust model-based predictive control (MPC) of an exothermic continuous stirred tank reactor (CSTR) with uncertain parameters is presented. Three robust MPC approaches are considered and the simulation results are compared in terms of quality of control performance and total consumption of coolant. The results reveal the main benefits of the considered approaches and confirm that the robust MPC can bring about a reduction in consumption of the coolant.     

Determination of acid volatile sulphur in river sediments by ICP-OES coupled with purge and trap method

The developed and tested method is based on the acid volatile sulphur (AVS) releasing from a sample of sediment by acidification with hydrochloric acid and sequential absorption of released hydrogen sulphide into the absorption solution of sodium hydroxide. Total sulphur absorbed in the absorption solution is subsequently determined by inductively coupled plasma optical emission spectrometry (ICP-OES) technique. The method was tested using both model and real samples of the river sediment. Obtained results were compared with the results of iodometric determination as the method routinely used for the AVS determination. In case of using ICP-OES with purge and trap, there is no spectral interference of calcium; therefore for the determination of sulphur, it is possible to use atomic emission line of sulphur S I 180.7 nm. The tested method provides the results comparable with the iodometric method within the range of tested concentrations. The detection limit (LOD) of this method is 0.09 mg· S^2? ? L^?1 in the absorption solution which corresponds to 0.23 mg S^2?·kg^?1 in a sediment. Value of LOD is comparable with the iodometric determination.     

Molecular characterization and first report of Cryptosporidium genotypes in human population in the Slovak Republic

In our study, we examined 91 fecal samples from five different groups of people containing HIV patients, hemodialysis patients, kidney transplant recipients, immunocompetent humans without clinical signs, and humans with suspected cryptosporidiosis. The purpose of our study was to determine species and genotype composition of representatives of Cryptosporidium spp. using PCR analysis of small subunit ribosomal RNA gene and 60‐kDa glycoprotein gene and examine their phylogenetic relationship. In HIV‐positive/AIDS‐infected group of patients and in hemodialysis patients, no presence of Cryptosporidium species was detected. In two kidney transplant recipients, we detected species/genotypes Cryptosporidium parvum IIaA13G1T1R1 (KT355488) and Cryptosporidium hominis IaA11G2R8 (KT355489) and in two immunocompetent patients with clinical symptoms, we identified Cryptosporidium muris and C. hominis IbA10G2T1 (KT355490). In the group of healthy immunocompetent individuals without clinical signs, we identified species/genotype C. hominis IbA11G2 (KT355491) in one sample.     

Two aspects of water in self-heating risk of aluminium powders: calorimetric study

Journal of Thermal Analysis and Calorimetry - Two samples (“O” and “C”) of aluminium-based powders were calorimetrically investigated with respect to the self-heating risk...     

Development and validation of high-performance thin-layer chromatographic method for determination of amygdalin

ABSTRACT

A new method for the extraction and quantitative determination of amygdalin has been proposed. Accelerated solvent extraction was applied for the extraction, and reversed-phase high-performance thin-layer chromatography method was developed, validated, and applied for the determination of amygdalin in the extracts of apricot, plum, almond, and peach kernels. The chromatographic system used was RP-18 silica, as stationary phase and acetonitrile/water (50:50, v/v), as mobile phase. Densitometric scanning was performed at 210 nm. The method was validated with respect to specificity, linearity, precision, and accuracy. The results showed that the peak area responses were linear within the concentration range of 2.5–50.0 µg/spot (R² = 0.9984). The limit of quantification was 4.28 µg/spot, and the detection limit 1.28 µg/spot. The intra-day and inter-day reproducibility, in terms of %RSD, were in the range of 0.81–1.15 and 1.32–1.89, respectively. The accuracy data were in the range from 99.98 to 100.56%. The method is linear, quantitative and reproducible, and could be used as an efficient and economical green chromatographic procedure for the determination of amygdalin in the fruit kernel.     

Study of micropores accessibility in coals and activated carbon using immersion heats with C1–C4 alkanols

Two natural coals and a sample of activated carbon were studied with respect to micropores accessibility for C1–C4 alkanols using immersion calorimetry. From the immersion enthalpies, micropores volumes were calculated according to the Stoeckli–Kraehenbuehl (SK) equation, and obtained values were compared with the surface characteristics of gas adsorption measurements. Validity of the SK equation was found to be problematic for natural coals giving micropores volumes up to three times exceeding those of the CO₂ adsorption measurements. Reason for such discrepancy is discussed, with specific interactions between coals and alkanols likewise marked swelling of coals in the presence of alkanols being recognised as possible explanation. A drop in immersion heats with branched butanols was generally observed, enabling at least semi-quantitative evaluation of the abundance of micropores with diameters below ca. 0.7 nm that are inaccessible for tert-butanol.

     

Determination of the thermal modification degree of beech wood using thermogravimetry

Thermal modification is one of the environmental friendly wood preservation technologies. During this process, changes of the main woody cell wall components occur, which lead to improved dimensional stability, lower hygroscopicity and improvement in biological durability. Several chemical reactions which occur during thermal treatment of wood caused changes in wood properties. During TG measurements, thermal decomposition reactions, which was not completed during previous thermal modification process, continued in wood samples, meaning that more thermally treated samples exhibited lower mass losses in a certain or whole temperature range up to 600 °C. Therefore, mass loss, obtained within selected temperature range, could be used as a marker of previous thermal treatment. The aim of the present work is to evaluate suitability of a thermogravimetric method (TG) for determination of a degree of thermal treatment of beech wood. On the basis of thermally untreated sample and those which were thermally modified at 180, 190, 200, 210, 215 and 220 °C in the absence of oxygen, respectively, and with known values of mass loss during the modification processes, several calibration curves were constructed. They represent mass loss in a certain temperature range during TG measurement versus mass loss during previous thermal modification. In a temperature range from 130 to 300 °C and from 130 to 320 °C under nitrogen atmosphere, a linear dependence was observed; correlation coefficients R ² were 0.87 and 0.91, respectively. In wider temperature range and under air atmosphere, lower correlation coefficients were obtained. High correlation coefficient, higher than 0.95, was observed in a temperature range from 25 to 130 °C under both atmospheres. In this region, dehydration due to rehydration of thermally modified samples occurs. The results of this work were compared with those obtained for Norway spruce.