Determination of styrene in olive oil by an automatic purge-and-trap system coupled to gas chromatography-mass spectrometry

Summary A new gas chromatographic method using an automatic purge-and-trap system coupled to a GC with mass selective detection to analyze styrene at the parts-per-trillions (ng kg^–1) level is described. The method shows a good sensitivity and the detection limit is 10 ng kg^–1 with a relative standard deviation (RSD) of 4.7% for 164 ng kg^–1 styrene in olive oil. This analytical method has been successfully applied to the analysis of styrene in extra-virgin olive oil from the European market.     

Mössbauer and infrared spectroscopic studies of novel mixed valence states in cobaltous ferrocyanides and ferricyanides

Novel mixed valence states have been obtained by the treatment of cobaltous ferrocyanides (Co⁺²Fe^II) and ferricyanides (Co⁺²Fe^III) in an ozone flow. The CN stretching bands occur at 2085 cm^–1 for Co⁺²Fe^II and at 2160 cm^–1 for Co⁺²Fe^III. After the ozonization process of Co⁺²Fe^II, an intense band approximately at 2125 cm^–1 is detected. This intermediate band must correspond to a mixed valence state of the type: Fe^II–CN–Co²⁺–NC–Fe^III Mössbauer spectra recorded in situ during the ozonization of Co⁺²Fe^II show the presence of two components: a doublet with isomer shift and quadrupole splitting values close to the cobalti ferricyanide and a very broad line for the mixed valence state. From the Mössbauer and infrared spectra of the aged samples of the Co⁺²Fe^II after ozonization, a relaxation process to the initial state of the samples is observed but the mixed valence state is stable.     

Analysis of drugs by AAS via formation of ion pairs

A new procedure for determining nitrogenated bases by forming ion pairs with Fe(SCN)6^3– is studied. The method consists of extracting the ion pair formed by a nitrogenated base and the inorganic complex Fe(SCN)6^3– into an organic phase, and measuring the iron in the organic phase by AAS at 248.3 nm. The optimal experimental conditions for determining amylocaine, avacan, bromhexine, diphenhydramine and papaverine are studied. The organic phase used is 1,2-dichloroethane. The standard deviation of the method varies between 10^–1 and 10^–2. The interferences produced by various substances are studied.     

Mineral speciation of copper and zinc in flying ash from a thermal power plant

Summary We studied the mineral speciation of Cu, Zn and Hg in fly ash from a large thermal plant burning lignite. By applying various treatments carried out under different conditions and taking into account the solubility and physical properties (boiling and melting point, etc.) and the behaviour towards combustion of the different possible compounds, we concluded that the ash assayed contained 109.6, 114.4 and 14.30 g/g of zinc silicate, zinc oxide and/or zinc sulphide and metal zinc, respectively, as well as 24.5 g/g of copper silicate and 31.2 g/g of a mixture of copper oxide, sulphide and metal. The formation of these compounds in the combustion of lignite is discussed.     

Determination of lead in wines by hydride generation atomic absorption spectrometry.

The optimization of lead hydride generation in aqueous ethanolic media and the influence on its generation of the wine components, both white and red, have been studied. These interferences were overcome by careful control of the parameters affecting hydride generation and the procedure was applied to the determination of Pb in wines. The method is fast, accurate and sensitive and can be used to quantify 24 ppb of Pb in wines.     

Quantitative determination of sotolon, maltol and free furaneol in wine by solid-phase extraction and gas chromatography-ion-trap mass spectrometry

A method for the analytical determination of sotolon [4,5-dimethyl-3-hydroxy-2(5H)-furanone], maltol [3-hydroxy-2-methyl-4H-pyran-4-one] and free furaneol [2,5-dimethyl-4-hydroxy-3(2H)-furanone] in wine has been developed. The analytes are extracted from 50 ml of wine in a solid-phase extraction cartridge filled with 800 mg of LiChrolut EN resins. Interferences are removed with 15 ml of a pentane-dichloromethane (20:1) solution, and analytes are recovered with 6 ml of dichloromethane. The extract is concentrated up to 0.1 ml and analyzed by GC-ion trap MS. Maltol and sotolon were determined by selected ion storage of ions in the m/z ranges 120-153 and 79-95, using the ions m/z 126 and 83 for quantitation, respectively. Furaneol was determined by non-resonant fragmentation of the m/z 128 mother ion and subsequent analysis of the m/z 81 ion. The detection limits of the method are in all cases between 0.5 and 1 microg l(-1), well below the olfactory thresholds of the compounds. The precision of the method is in the 4-5% range for levels in wine around 20 microg l(-1). Linearity holds at least up to 400 microg l(-1), and is satisfactory in all cases. The recoveries of maltol and sotolon are constant (70 and 64%, respectively) and do not depend on the type of wine. On the contrary, in the case of furaneol, red wines show constant and high recoveries (97%), while the recoveries on white wines range between 30 and 80%. Different experiments showed that this behavior is probably due to the existence of complexes formed between furaneol and sulphur dioxide or catechols. Sensory experiments confirmed that the complexed forms found in white wines are not perceived by orthonasal olfaction, and that the furaneol determined by the method can be considered as the free and odor-active fraction.     

Interactive Thermal Effects on Metal–Organic Framework Polymer Composite Membranes

Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO₂ sequestration, H₂ production, and water supply and disposal. Mixed‐matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF‐8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt % 140 nm‐sized ZIF‐8 loading causes a 40 % decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545 °C) 80 °C lower than in the raw polymer (625 °C).     

Determination of dissolved sulphides in waste water samples by flow-through stripping chronopotentiometry with a macroporous mercury-film electrode

Sulphides in water samples were determined by stripping chronopotentiometry in a computer controlled flow system with a flow-through electrochemical cell. The working electrode was a porous glassy carbon electrode coated with Nafion and mercury. The sample was diluted with 0.1 mol L⁻¹ NaOH and analysed. Sulphides in the sample were collected in the porous electrode as mercury sulphide and then stripped by a current of −500 μA. The limit of detection was found to be 1.6 μg L⁻¹ and 0.5 μg L⁻¹ for 1 mL and 5 mL of preconcentrated sample, respectively. The linear range for 1 mL sample was found to be 5-400 μg L⁻¹. The repeatability and reproducibility was found to be 2.6% and 4.8%, respectively. The method was applied to analyses of waste water samples from a tannery.