Atmospheric chemistry of diazomethane – an experimental and theoretical study

The kinetics of the O₃, OH and NO₃ radical reactions with diazomethane were studied in smog chamber experiments employing long-path FTIR and PTR-ToF-MS detection. The rate coefficients were determined to be k _CH2NN+O3?=?(3.2?±?0.4)?×?10^?17 and k _CH2NN+OH?=?(1.68?±?0.12)?×?10^?10 cm³ molecule^?1 s^?1 at 295?±?3?K and 1013?±?30 hPa, whereas the CH₂NN?+?NO₃ reaction was too fast to be determined in the static smog chamber experiments. Formaldehyde was the sole product observed in all the reactions. The experimental results are supported by CCSD(T*)-F12a/aug-cc-pVTZ//M062X/aug-cc-pVTZ calculations showing the reactions to proceed exclusively via addition to the carbon atom. The atmospheric fate of diazomethane is discussed.     

Roles of SiH4 and SiF4 in growth and structural changes of poly-Si films

The structural properties of polycrystalline silicon films, prepared by plasma enhanced chemical vapor deposition system, with different flow rates of SiH₄/SiF₄ mixtures at 300 °C were investigated. This study indicates that the low hydrogen coverage on the growing surface, under optimum fluorine radicals, will be leaded to an improvement of crystallized area as compared with case of high hydrogen coverage surface. Moreover, the studies of the role of SiH₄ and SiF₄ radicals show that the SiH₄ radicals are important in the nucleation and growth of grains. However, SiF₄ radicals are effective in the structural change of grain boundaries regions and by this way, in the present system, establish the growth of grains under the dominant 〈1 1 0〉 direction. The stress investigation indicates that addition of high flow rate of SiF₄ in amorphous film, results in the nearly stress free films. Finally, we found that the changes in g-value reflect the changes in the intrinsic compressive and tensile stress in the both polycrystalline and amorphous silicon films.     

A stochastic algorithm using one sample point per iteration and diminishing stepsizes

A stochastic algorithm for finding stationary points of real-valued functions defined on a Euclidean space is analyzed. It is based on the Robbins-Monro stochastic approximation procedure. Gradient evaluations are done by means of Monte Carlo simulations. At each iteratex _i , one sample point is drawn from an underlying probability space, based on which the gradient is approximated. The descent direction is against the approximation of the gradient, and the stepsize is 1/i. It is shown that, under broad conditions, w.p.1 if the sequence of iteratesx ₁,x ₂,...generated by the algorithm is bounded, then all of its accumulation points are stationary.     

Observation of the nonlinear effect in relativistic Thomson scattering of electron and laser beams

Thomson scattering of high-power laser and electron beams is a good test of electrodynamics in the high-field region. We demonstrated production of high-intensity X-rays in the head-on collision of a CO₂ laser and 60-MeV electron beams at Brookhaven National Laboratory, Accelerator Test Facility. The energy of an X-ray photon was limited at 6.5 keV in the linear (lowest order) Thomson scattering, but the nonlinear (higher order) process produces higher energy X-rays. We measured the angular distribution of the high-energy X-rays and confirmed that it agrees with theoretical predictions.     

Structures and stability of Al<Subscript><Emphasis Type="Bold">7</Emphasis></Subscript>C and Al<Subscript><Emphasis Type="Bold">7</Emphasis></Subscript>N clusters

We report results of the atomic and electronic structures of Al₇C cluster using ab initio molecular dynamics with ultrasoft pseudopotentials and generalized gradient approximation. The lowest energy structure is found to be the one in which carbon atom occupies an interstitial position in Al₇ cluster. The electronic structure shows that the recent observation [Chem. Phys. Lett. 316, 31 (2000)] of magic behavior of Al₇C^- cluster is due to a large highest occupied and lowest unoccupied molecular orbital (HOMO-LUMO) gap which makes Al₇C^- chemically inert. These results have further led us to the finding of a new neutral magic cluster Al₇N which has the same number of valence electrons as in Al₇C^- and a large HOMO-LUMO gap of 1.99 eV. Further, calculations have been carried out on (Al₇N)₂ to study interaction between magic clusters. Received 28 July 2001     

Khillah extract as inhibitor for acid corrosion of SX 316 steel

The inhibitive effect of the extract of khillah (Ammi visnaga) seeds, on the corrosion of SX 316 steel in HCl solution was determined using weight loss measurements as well as potentiostatic technique. It was found that the presence of the extract reduces markedly the corrosion rate of steel in the acid solution. The inhibition efficiency increases as the extract concentration is increased. The inhibitive effect of khillah extract was discussed on the basis of adsorption of its components on the metal surface. Negative values were calculated for the energy of adsorption indicating the spontaneity of the adsorption process. The formation of insoluble complexes as a result of interaction between iron cations and khellin, which present in the extract, was also discussed.     

Some remarks to multivariate regression model

Some remarks to problems of point and interval estimation, testing and problems of outliers are presented in the case of multivariate regression model. This work was supported by the Council of Czech Government J14/98:153100011.     

Structural-acoustic coupling effect on the nonlinear natural frequency of a rectangular box with one flexible plate

The nonlinear natural frequency of a rectangular box, which consists of one flexible plate and five rigid plates, is studied in this paper. The flexible plate is assumed to vibrate like a simple piston. The behavior of the structural-acoustic coupling between the flexible plate and the air cavity is analyzed by using the proposed finite element modal method. The system finite element equation is reduced and expressed in terms of the modal coordinates with small degrees of freedom by using the proposed reduction method. The system nonlinear stiffness matrix representing the large amplitude vibration can be transformed to be a constant modal matrix. The natural frequencies are determined by using the harmonic balance method to solve the eigenvalue equations of the structural-acoustic system. The effect of the cavity depth on the natural frequencies and convergence studies are discussed in detail.     

Efficient computation of natural convection in a concentric annulus between an outer square cylinder and an inner circular cylinder

In this work, the natural convection in a concentric annulus between a cold outer square cylinder and a heated inner circular cylinder is simulated using the differential quadrature (DQ) method. The vorticity‐stream function formulation is used as the governing equation, and the coordinate transformation technique is introduced in the DQ computation. It is shown in this paper that the outer square boundary can be approximated by a super elliptic function. As a result, the coordinate transformation from the physical domain to the computational domain is set up by an analytical expression, and all the geometrical parameters can be computed exactly. Numerical results for Rayleigh numbers range from 104 to 106 and aspect ratios between 1.67 and 5.0 are presented, which are in a good agreement with available data in the literature. It is found that both the aspect ratio and the Rayleigh number are critical to the patterns of flow and thermal fields. The present study suggests that a critical aspect ratio may exist at high Rayleigh number to distinguish the flow and thermal patterns. Copyright © 2002 John Wiley & Sons, Ltd.     

Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.