Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.     

In situ tissue pathology from spatially encoded mass spectrometry classifiers visualized in real time through augmented reality

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data. Spatially encoded pathology classifications are displayed at the site of laser sampling as color-coded pixels in an augmented reality video feed of the surgical field of view. This is enabled by two-way communication between surgical navigation and mass spectrometry data analysis platforms through a custom-built interface. Performance of the system was evaluated using murine models of human cancers sampled in situ in the presence of body fluids with a technical pixel error of 1.0 ± 0.2 mm, suggesting a 84% or 92% (excluding one outlier) cancer type classification rate across different molecular models that distinguish cell-lines of each class of breast, brain, head and neck murine models. Further, through end-point immunohistochemical staining for DNA damage, cell death and neuronal viability, spatially encoded PIRL-MS sampling is shown to produce classifiable mass spectral data from living murine brain tissue, with levels of neuronal damage that are comparable to those induced by a surgical scalpel. This highlights the potential of spatially encoded PIRL-MS analysis for in vivo use during neurosurgical applications of cancer type determination or point-sampling in vivo tissue during tumor bed examination to assess cancer removal. The interface developed herein for the analysis and the display of spatially encoded PIRL-MS data can be adapted to other hand-held mass spectrometry analysis probes currently available.

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data.     

Structural Isomers of Bis(diphenylarsino)methane‐dichloroplatinum(II)

From a range of preparative methods, three geometric isomers of bis(diphenylarsino)methane‐dichloroplatinum(II) have been isolated, viz. cis‐PtCl₂(dpam), trans, trans‐Pt₂Cl₄(dpam)₂ and cis, trans‐Pt₂Cl₄(dpam)₂. Their structures were determined by single‐crystal X‐ray diffraction.     

HPLC Determination of Letrozole in Plasma Using Fluorescence Detection: Application to Pharmacokinetic Studies

A simple, rapid and sensitive HPLC method has been developed and validated for the analysis of letrozole in human plasma. The separation was achieved on a monolithic silica column using acetonitrile–phosphate buffer. A fluorescence detector was used for the quantitation with excitation and emission wavelengths at 230 and 295 nm. The assay enables the measurement of letrozole for therapeutic drug monitoring with a minimum quantification limit (LOQ) of 0.5 ng mL^?1. The method involves a simple, one-step extraction procedure with complete recovery. Calibration was linear over the concentration range 0.5–80 ng mL^?1. The coefficients of variation for inter-day and intra-day assay were found to be less than 8%.     

High‐mobility solution‐processed zinc oxide thin films on silicon nitride

A high effective electron mobility of 33 cm² V^–1 s^–1 was achieved in solution‐processed undoped zinc oxide (ZnO) thin films. The introduction of silicon nitride (Si₃N₄) as growth substrate resulted in a mobility improvement by a factor of 2.5 with respect to the commonly used silicon oxide (SiO₂). The solution‐processed ZnO thin films grown on Si₃N₄, prepared by low‐pressure chemical vapor deposition, revealed bigger grain sizes, lower strain and better crystalline quality in comparison to the films grown on thermal SiO₂. These results show that the nucleation and growth mechanisms of solution‐processed films are substrate dependent and affect the final film structure accordingly. The substantial difference in electron mobilities suggests that, in addition to the grain morphology and crystalline structure effects, defect chemistry is a contributing factor that also depends on the particular substrate. In this respect, interface trap densities measured in high‐κ HfO₂/ZnO MOSCAPs were about ten times lower in those fabricated on Si₃N₄ substrates. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)

     

Three component reactions：An efficient and green synthesis of 3, 4-dihydropyrimidin-2-(1H)-ones and thiones using silica gel-supported L-pyrrolidine-2-carboxylic acid-4-hydrogen sulfate

An environmentally benign aqueous protocol for the synthesis of 3,4-dihydropyrimidin-2-(1H)-ones and thiones promoted by a green catalyst,silica gel-supported L-pyrrolidine-2-carboxylic acid-4-hydrogen sulfate,has been developed.The use of nontoxic,thermally stable and inexpensive amino acid catalyst makes the process simple with minimal amount of chemical waste.Compared with classical Biginelli reaction conditions,this new method has the advantages of high yields and simple workup procedures.     

Optimal free-defect synthesis of four-bar linkage with joint clearance using PSO algorithm

This paper presents the design of planar four-bar linkages free of order, branch and circuit defects, for the purpose of path generation, having clearances at one, two, three or all of its joints. Joint clearance is treated as a massless virtual link and its direction is known by the direction of the joint force. A Particle Swarm Optimization based algorithm is given here to solve this highly nonlinear optimization problem with some constraints, namely; the Grashof’s and free of the foregoing defects conditions. An example is included in which the optimal problem is solved for different cases; namely planar four-bar linkage having clearances at one, two, three, all of the joints and without clearance. For all the designs, the generated paths, the errors and the directions of the virtual links are plotted and are compared. Finally, we compare the optimal designs with reality.     

Optimization of the reflux ratio for methanol–water stage distillation column

In this paper, the enthalpy-concentration method was applied in order to model a steady-state continuous methanol–water mixture distillation column. This work includes three steps; first, to develop a code in MATLAB v.7.6 to apply to the mathematical model of the column. The second step is to simulate the column using HYSIS v.3.2. While the third is the calculation of the optimized reflux ratio to minimize the operating cost. For a distillation tower such as the methanol–water splitter in this study, there are relatively few degrees of freedom that can be manipulated in order to minimize operating costs; the reflux ratio can influence the steady-state operating point and therefore the daily costs. In this paper, we have discussed the trade-offs between reflux ratios and operating costs. A correlation is derived to define the optimum value of the reflux ratio as an exponential function of a certain economic parameter of energy prices and depreciation costs. We demonstrate that, at low energy prices or high equipment depreciation costs, the optimum reflux factor is high.