Green and Cost Effective Synthesis of Fluorescent Carbon Quantum Dots for Dopamine Detection

Carbon quantum dots (CQDs) due to its high fluorescent output is evolving as novel sensing material and is considered as future building blocks for nano sensing devices. Hence, in this investigation we report microwave assisted preparation and multi sensing application of CQDs. The microwave derived CQDs are characterized by Dynamic Light Scattering (DLS) experiment and Fourier Infrared spectra (FTIR) to investigate the size distribution and chemical purity respectively. Fluorescent emission spectra recorded at varying pH shows varying fluorescence emission intensities. Further, emission spectra recorded at different temperatures shows that fluorescence emission of CQDs greatly depends on temperature. Therefore, we demonstrate the pH and temperature sensing characteristics of CQDs by fluorescence quenching behaviour. In addition, the interaction and sensing behaviour of CQDs for dopamine is also presented in this work with a detection limit of 0.2 mM. The steady state and time-resolved methods have been employed in fluorescence quenching methods for sensing dopamine through CQDs at room temperature. The bimolecular quenching rate constants for different concentration have been measured. The interaction between CQDs and dopamine indicates fluorescence quenching method is an elegant process for detecting dopamine through CQDs.     

Innovative approach for the synthesis of N-substituted amides from nitriles and alcohols using propylphosphonic anhydride (T3P®) under solvent-free conditions

Novel and convenient methodology for the construction of N-substituted amide derivatives have been developed from nitriles and alcohols using propylphosphonic anhydride (T3P^®). This methodology is an alternate approach to the synthesis of amides via Ritter reaction, which is one of the classical methods for the synthesis of N-substituted amides from nitriles and alcohols. In this approach, first T3P^® activates the alcohol which is then attacked by nitrile to form N-substituted amides. This methodology can also apply for the synthesis of benzhydryl ether. This developed protocol is one of the novel applications of T3P^®.     

Synthesis and antiviral activity of novel imidazo[2,1-b]thiazoles coupled with morpholine and thiomorpholines

Herein described the synthesis and antiviral evaluation of a novel series of morpholine and thio-morpholine coupled imidazo[2,1-b]thiazoles. The three-step reaction sequence involving the condensation of 1,3-dichloroacetone with thiourea followed by coupling with morpholine and thiomorpholine and finally cyclization with substituted α-bromoacetophenones yielded the desired imidazothiazoles 7(a–l) . Screening of all the new compounds for their in vitro antiviral activity against influenza virus A/Puerto Rico/8/34 (H1N1) in MDCK cells, resulted in two potent analogs, 7d (IC₅₀: 1.1 μM, C₅₀: >300 μM, SI = 273) and 7e (IC₅₀: 2.0 μM, C₅₀: >300 μM, SI = 150), with a favorable toxicity profile and are the best anti-influenza hit analogs for further structural optimization.     

Highly enantioselective conjugate addition of malononitrile to 2-enoylpyridines with bifunctional organocatalyst

An efficient enantioselective conjugate addition of malononitrile to a range of β-substituted 2-enoylpyridines catalyzed by cinchona alkaloid-based bifunctional urea catalysts has been developed. Both enantiomers of the products could be achieved with the same level of enantioselectivity by using pseudoenantiomeric catalysts in up to 97% ee and in excellent yields. One of the enantioenriched products has been transformed to a highly functionalized piperidone derivative.     

An Unusual Ring‐Contraction/Rearrangement Sequence for Making Functionalized Di‐ and Triquinanes

A novel ring contraction/rearrangement sequence leading to functionalized 2,8‐oxymethano‐bridged di‐ and triquinane compounds is observed in the reaction of various substituted 1‐methyl‐4‐isopropenyl‐6‐oxabicylo[3.2.1]octan‐8‐ones with Lewis acids. The reaction is novel and is unprecedented for the synthesis of di‐ and triquinane frameworks.     

A facile and convenient synthesis of novel imidazo[1,2-b] isoxazoles and their Mannich bases as potential biodynamic agents

A series of novel imidazo[1,2-b]isoxazoles 3 and their Mannich bases 4–6 were synthesized via convenient reactions. The reaction of 3-aminoisoxazole 1 with substituted phenacyl bromides 2 in dry ethanol afforded the corresponding 6-methyl-3-aryl imidazo[1,2-b]isoxazoles 3 in good yields.Compounds 3 on treatment with 37% formaline and secondary amines furnished the corresponding novel Mannich bases viz., 6-methyl-3-aryl-2-(morpholine/pyrrolidin-1-yl/piperidin-1-yl)-methyl-imidazo[1,2-b]isoxazoles 4–6.     

Synthesis and Characterization of CeO2 Nanoparticles via Solution Combustion Method for Photocatalytic and Antibacterial Activity Studies

CeO₂ nanoparticles have been proven to be competent photocatalysts for environmental applications because of their strong redox ability, nontoxicity, long-term stability, and low cost. We have synthesized CeO₂ nanoparticles via solution combustion method using ceric ammonium nitrate as an oxidizer and ethylenediaminetetraacetic acid (EDTA) as fuel at 450 °C. These nanoparticles exhibit good photocatalytic degradation and antibacterial activity. The obtained product was characterized by various techniques. X-ray diffraction data confirms a cerianite structure: a cubic phase CeO₂ having crystallite size of 35 nm. The infrared spectrum shows a strong band below 700 cm⁻¹ due to the Ce−O−Ce stretching vibrations. The UV/Vis spectrum shows maximum absorption at 302 nm. The photoluminescence spectrum shows characteristic peaks of CeO₂ nanoparticles. Scanning electron microscopy (SEM) images clearly show the presence of a porous network with a lot of voids. From transmission electron microscopy (TEM) images, it is clear that the particles are almost spherical, and the average size of the nanoparticles is found to be 42 nm. CeO₂ nanoparticles exhibit photocatalytic activity against trypan blue at pH 10 in UV light, and the reaction follows pseudo first-order kinetics. Finally, CeO₂ nanoparticles also reduce Cr^VI to Cr^III and show antibacterial activity against Pseudomonas aeruginosa.     

An efficient synthesis of medicinally important indole based triarylmethanes by using propylphosphonic anhydride (T3P®)

Abstract

We have developed an economical and efficient method for the synthesis of medicinally and synthetically important indole-based triarylmethanes by using indoles and benzhydrols in the presence of propylphosphonic anhydride (T3P^®). This methodology is an alternate approach for the C–C bond formation with good to excellent yields. In this T3P-mediated dehydration approach, the by-product is highly soluble in water, so that it can be done at larger scale also. In addition to that this efficient protocol has several advantages such as mild reaction conditions, short reaction time and operational simplicity. We have successfully synthesized pyrrole, imidazothiadiazole and imidazolo pyridine based triarylmethanes also.     

Bi2O3/FAp,a sustainable catalyst for synthesis of dihydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives through green strategy

The bismuth loaded on fluorapatite (Bi₂O₃/FAp) proved to be an excellent catalyst for the synthesis of novel dihydro-[1,2,4]triazolo[1,5-a]pyrimidine derivatives via a three-component reaction involving the mixture of 1H-1,2,4-triazol-5-amine, ethyl cyanoacetate or ethyl acetoacetate, and different benzaldehydes in ethanol at room temperature. The catalyst material was characterized by X-ray diffraction, Brunauer–Emmett–Teller surface area analysis, Fourier-transform infrared, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy techniques. The efficacy of Bi₂O₃/FAp as a heterogeneous catalyst was evaluated with the loading of different wt% of bismuth on FAp. The 2.5% bismuth on FAp performed extremely well as a catalyst with a high yield of products (92%–96%) in a short reaction time (25–35 min). The catalyst was recovered by simple filtration. It showed undiminished activity up to five runs. Simple work-up, room temperature reaction, short reaction time, high yields, no column chromatography, and good reusability of catalyst are the merits of the proposed protocol. In addition, this process offers 100% carbon efficiency and 98% atom economy with noteworthy fiscal and environmental benefits.     

Enantiospecific resolution of rabeprazole by liquid chromatography on amylose-derived chiral stationary phase using photo diode array and polarimetric detectors in series

A simple and rapid liquid chromatographic method for enantioselective separation and determination of R-(+) and S-(−) enantiomers of rabeprazole in drugs and pharmaceuticals using photo diode array (PDA) and polarimetric detectors connected in series was developed. Chiralpak AD-H (250 mm × 4.6 mm) 5 μm column packed with amylose tris(3,5-dimethylphenyl carbamate) as a stationary phase and the mobile phase containing n-hexane:ethanol:2-propanol(75:15:10, v/v/v) in an isocratic mode has yielded baseline separation with resolution greater than 3.0 at 40 °C. Effects of ethanol, 2-propanol and temperature on separation were studied for optimum resolution. Lansoprazole sulphone was used as an internal standard (IS) for quantitative determination of individual enantiomers in bulk drugs as well as pharmaceutical formulations. The method was validated in terms of accuracy, precision and linearity according to ICH guidelines. The linearity of the method was studied in the range of 0.5-50 μg/ml and the r² was >0.9997. The inter- and intra-day precision of assay were determined (R.S.D. < 1%) and the recoveries were in the range of 99.63-100.22% with <1% R.S.D. The limits of detection (LOD) and quantification (LOQ) were 0.02 μg/ml and 0.07 μg/ml for both the enantiomers, respectively.