A new microwave dielectric method for studying photoinitiated chain radical polymerization processes

Measurements of both real and imaginary parts of the dielectric constant at a fixed microwave frequency have been performed on n-butyl acrylate/poly(n-butyl acrylate) mixtures. The dielectric constant of the mixtures has been compared with that of neat n-butyl acrylate during UV photoinitiated polymerization. The values of the imaginary part of the dielectric constant thus obtained have allowed determination of the instantaneous monomer concentration and verified the kinetic equation for the photoinitiated polymerization process. The limits of validity of the method as well as its capability of providing detailed kinetic information are also discussed.     

Negative ion chemical ionization mass spectra of (η6-arene)Cr(CO)3

The negative ion chemical ionization mass spectra, with ammonia and methane as reagent gases, of the (η⁶-arene)Cr(CO)₃ complexes, where the arene is C₆H₅COCH₃, C₆H₅COC₂H₅, C₆H₅COC₃H₇, C₆H₅COC(CH₃)₃, 2-CH₃C₆H₄COC₃H₇, C₆H₅COOCH₃, C₆H₅CH₃, 1,3,5-(CH₃)₃C₆H₃ and C₆H₅CH₂COC₂H₅, are reported. Similar behaviour is observed with the two reagent gases, but ammonia shows a much higher abundance for the ions produced by reactions of [NH₂]^? with sample molecules. The compounds containing the C₆H₅CO group display an abundant [M]^{? ˙}, whereas the other compounds exhibit [M? H]^? as base peak, produced by ion/molecule reactions. A comparison of the negative ion chemical ionization mass spectra of the (η⁶-arene)Cr(CO)₃ complexes with those of the corresponding ligands shows the strong electron withdrawing power of the Cr(CO)₃ group in the gas phase.     

Reaction of singlet oxygen with some benzylic sulfides

Product distribution, total quenching rate (k_T), and rate of chemical reaction (k_r) with singlet oxygen have been determined for some alkyl, benzyl, α-methylbenzyl, and cumyl sulfides. Their contributions depend on the steric hindering around the sulfur atom. In protic solvents, the sulfoxide is the main product via a hydrogen-bonded persulfoxide. In apolar solvents, intramolecular α-H abstraction leads to oxidative C-S bond cleavage, with varying efficiency. The behavior of sulfides is compared to that of alkenes and amines.     

Crystal,molecular and electronic structure of 1,1-diaryl-2-halogenoethylenes

On the basis of semiempirical calculations, the conformation of the isolated molecule of 2-bromo-1,1-diphenylprop-1-ene corresponding to the minimum of total energy was determined. Assuming some information on the localization of the molecules in the crystal, also the conformation in a theoretical crystal was studied. The results have been compared with the crystal structure of 2-bromo-1,1-diphenylprop-1-ene, as obtained by X-ray diffraction. From the comparison a slight displacement of the C2 atom was suggested.

---

Zusammenfassung Die dem Minimum der Gesamtenergie entsprechende Konformation des isolierten Moleküls von 2-Brom-1,1-diphenylprop-1-en wurde durch halb-empirische Methoden bestimmt. Gewisse Ergebnisse über die Anordnung der Moleküle im Kristall machten es möglich, die Konformation in einem theoretischen Kristall zu untersuchen. Nach Vergleich der Resultate mit der durch Röntgen-Analyse bestimmten Kristallstruktur des 2-Brom-1,1-diphenylprop-1-en wurde eine kleine Verschiebung des C2-Atoms vorgeschlagen.

---

Résumé Par le moyen de calculs semiempiriques on a déterminé la conformation de la molécule isolée de 2-bromo-1, 1-diphénilprop-1-ène, correspondant au minimum d'énergie totale. On a aussi étudié la conformation dans le cristal théorique en se basant sur des informations concernant la localisation des molécules dans le cristal. On a comparé ces résultats avec ceux que nous avons obtenus par la détermination de la structure cristalline du 2-bromo-1, 1-diphénilprop-1-ène avec la diffraction des rayons X: cette comparaison nous a porté à déplacer un petit peu l'atome C 2.

---

---

This work was supported by a grant from the Italian Consiglio Nazionale delle Ricerche.     

The bent RC  N linkage: An AB initio study of NH2CN,NF2CN and PF2CN

The ab initio energies, nuclear and electron repulsions and charge distributions have been calculated using moderately large basis sets as a function of the RC  N angle (R  NH₂, NF₂ or PF₂). The optimum RC  N angles were calculated to be 178.9°, 176.6°, and 175° for NH₂CN, NF₂CN, and PF₂CN, respectively. A rationalization of the differing bends is presented in terms of nuclear-nuclear and electron-electron repulsions.     

A damage constitutive model for sliding friction coupled to wear

Several new constitutive models are formulated for the planar interface of a soft body sliding on a rigid soil, describing stick-slip phenomena due to friction, and wear due to abrasion. Attention is focused on damage at the interface, by neglecting any interaction with damage of body and any propagation of damage inside the body. Models are formulated in the general framework of the Thermodynamics of the irreversible processes and account for suitable defined internal variables of phenomenological type, namely gap, isotropic friction hardening and wear. The main feature of the new presented models is that the formulation of the wear process at the interface is obtained in the contest of Damage Mechanics, and it is based on the formal analogy between abrasion of a soft body and ductile damage of an elastic-plastic material. By following this approach, a scalar wear field, an effective stress and appropriate state and dissipation potentials are defined, able to describe a tangential isotropic wear process due to stick-slip and to hardening mechanism. Both cases of linear and nonlinear friction hardening are formulated; moreover, wearable and no-wearable bodies are considered. Numerical results relevant to one-dimensional problems are illustrated for monotonic, forward-backward and cyclic displacement time-histories, showing evolution for stress, gap and wear. Results furnished by different models are compared and discussed.     

Gas-phase pyrolysis mechanism and kinetics of 3-t-butoxyquadricyclane

The gas-phase pyrolysis of 3-t-butoxyquadricyclane [1] was investigated over the temperature range 511–542 K at one atm in helium. The initial pyrolysis step is the isomerization of 3-t-butoxyquadricyclane to 7-t-butoxynorbornadiene (Ea = 38.49 ± 0.85 kcal/mole, log A = 15.44 ± 0.35). 7-t-butoxynorbornadiene exhibits a single unimolecular reaction pathway which produces a mixture of t-butoxycycloheptatrienes (Ea = 38.44 ± 0.63 kcal/mole, log A = 15.05 ± 0.26). This two-step mechanism affords fewer reactions than unsubstituted quadricyclane in the gas phase and could be useful for its reduced sooting potential. © 1996 John Wiley & Sons, Inc.     

Charge transfer complexes of some N-methylated thiohydantoins with molecular iodine

Using a series of N-methylated thiohydantoins as substrates, the donor properties of the sulfur atom are measured by determining the stability constants (K) of their adducts with molecular iodine. The K's have been determined by recording the UV-visible spectra of several CH₂Cl₂ solutions with different amounts of the reagents. The experimental data fit the 1:1 adduct model for all the compounds. The K values, compared with those previously found for the unsubstituted hydantoins and with those obtained for 5-methyl-2-thiohydantoin, show that the hydrogen-bonding interaction between the NH hydrogen and the S-bonded iodine plays an important role in determining the stability of the adduct. The K values obtained for several pentaatomic rings, all containing the thioureido group  HN C() NH , are discussed on the basis of the influence of the substituents at C-4 and C-5 on the donor properties of the sulfur atom.     

Effects of Cations on HPTS Fluorescence and Quantification of Free Gadolinium Ions in Solution; Assessment of Intracellular Release of Gd3+ from Gd-Based MRI Contrast Agents

8-Hydroxypyrene-1,3,6-trisulfonate (HPTS) is a small, hydrophilic fluorescent molecule. Since the pKa of the hydroxyl group is close to neutrality and quickly responds to pH changes, it is widely used as a pH-reporter in cell biology for measurements of intracellular pH. HPTS fluorescence (both excitation and emission spectra) at variable pH was measured in pure water in the presence of NaCl solution or in the presence of different buffers (PBS or hepes in the presence or not of NaCl) and in a solution containing BSA. pKa values have been obtained from the sigmoidal curves. Herein, we investigated the effect of mono-, di-, and trivalent cations (Na⁺, Ca²⁺, La³⁺, Gd³⁺) on fluorescence changes and proposed its use for the quantification of trivalent cations (e.g., gadolinium ions) present in solution as acqua-ions. Starting from the linear regression, the LoD value of 6.32 µM for the Gd³⁺ detection was calculated. The effects on the emission were also analyzed in the presence of a combination of Gd³⁺ at two different concentrations and the previously indicated mono and di-valent ions. The study demonstrated the feasibility of a qualitative method to investigate the intracellular Gd³⁺ release upon the administration of Gd-based contrast agents in murine macrophages.