Modification of the cation exchange resin properties by impregnation in polyethyleneimine solutions: application to the separation of metallic ions

A commercial cation exchange resin Amberlite 200 has been modified after immersion in solutions of polyethyleneimine (PEI). The kinetic of fixation of the metallic ions have been determined. The modification of the surface of the resin deals with a change in the order of the affinities of the resins towards cations. The retention is the function of the formation and the stability of the complex. The conditions of modification (pH, PEI concentration and time of immersion) have been examined and the modification was confirmed by the determination of the exchange capacities, the distribution coefficient (P) and the selectivity factors (S). The obtained results revealed the effect of PEI on the exchange properties of the resin. The pH range selected (6-8) permitted a good adherence of PEI onto the resin surface. The quantity of the adsorbed PEI was increased by raising the initial concentration and the immersion period. The exchange capacity for copper ion passed from 2.6 mmol g⁻¹, in the case of unmodified resin, to 3.9 mmol g⁻¹ for the modified one.     

An unexpected P-cluster like intermediate en route to the nitrogenase FeMo-co

The nitrogenase MoFe protein contains two different FeS centers, the P-cluster and the iron–molybdenum cofactor (FeMo-co). The former is a [Fe₈S₇] center responsible for conveying electrons to the latter, a [MoFe₇S₉C-(R)-homocitrate] species, where N₂ reduction takes place. NifB is arguably the key enzyme in FeMo-co assembly as it catalyzes the fusion of two [Fe₄S₄] clusters and the insertion of carbide and sulfide ions to build NifB-co, a [Fe₈S₉C] precursor to FeMo-co. Recently, two crystal structures of NifB proteins were reported, one containing two out of three [Fe₄S₄] clusters coordinated by the protein which is likely to correspond to an early stage of the reaction mechanism. The other one was fully complemented with the three [Fe₄S₄] clusters (RS, K1 and K2), but was obtained at lower resolution and a satisfactory model was not obtained. Here we report improved processing of this crystallographic data. At odds with what was previously reported, this structure contains a unique [Fe₈S₈] cluster, likely to be a NifB-co precursor resulting from the fusion of K1- and K2-clusters. Strikingly, this new [Fe₈S₈] cluster has both a structure and coordination sphere geometry reminiscent of the fully reduced P-cluster (P^N-state) with an additional μ²-bridging sulfide ion pointing toward the RS cluster. Comparison of available NifB structures further unveils the plasticity of this protein and suggests how ligand reorganization would accommodate cluster loading and fusion in the time-course of NifB-co synthesis.

The K-cluster of NifB as a key intermediate in the synthesis of the nitrogenase active site supports [Fe₄S₄] cluster fusion occurs before carbide and sulfide insertion and displays ligand spatial arrangement reminiscent to that of the P-cluster.     

Elaboration and characterization of hybrid organic-inorganic gels obtained by reaction of 1,4-butanediol on tetramethoxysilane

New hybrid organic-inorganic gels have been obtained by reaction of 1,4-butanediol, on tetramethoxysilane Si(OMe)₄ dissolved in CCl₄. This reaction does not require water and leads to the formation of polymeric transparent materials.Infrared, ²⁹Si and ¹³C NMR spectroscopy shows that interchange reactions between OMe groups of alkoxide and -O-(CH₂)₄-O of 1,4-butanediol occurred, leading to the monolithic transparent gels in which both organic (Si-O-(CH₂)₄-O-Si) and inorganic (Si-O-Si) bridges are formed.     

Lower bound for the ratios of eigenvalues of Schrödinger with nonpositive single‐barrier potentials

Horváth and Kiss (Proc. Amer. Math. Soc., 2005) proved the upper bound estimate for Dirichlet eigenvalue ratios of the Schrödinger problem ?y^′′ + q(x)y = λy with nonnegative and single‐well potential q. In this paper, we prove that if q(x) is a nonpositive, continuous, and single‐barrier potential, then for λ_n > λ_m≥ ? 2q^?, where . In particular, if q(x) satisfies the additional condition , then λ₁ > 0 and for n > m ≥ 1. For this result, we develop a new approach to study the monotonicity of the modified Prüfer angle function.     

Comparative Study of Alkali-Cation-Based (Li+, Na+, K+) Electrolytes in Acetonitrile and Alkylcarbonates

The development of a suitable functional electrolyte is urgently required for fast-charging and high-voltage alkali-ion (Li, Na, K) batteries as well as next-generation hybrids supercapacitors. Many recent works focused on an optimal selection of electrolytes for alkali-ion based systems and their electrochemical performance but the understanding of the fundamental aspect that explains their different behaviour is rare. Herein, we report a comparative study of transport properties for LiPF₆, NaPF₆, KPF₆ in acetonitrile (AN) and a binary mixture of ethylene carbonate (EC), dimethyl carbonate (DMC): (EC/DMC : 1/1, weigh) through conductivities, densities and viscosities measurements in wide temperature domain. By application of the Stokes-Einstein, Nernst-Einstein, and Jones Dole equations, the effective ionic solvated radius of cation (r_eff), the ionic dissociation coefficient (α_D) and structuring Jones Dole's parameters (A, B) for salt are calculated and discussed according to solvent or cation nature as a function of temperature. From the results, we demonstrate that better mobility of potassium can be explained by the nature of the ion-ion and ion-solvent interactions due to its polarizability. In the same time, the predominance of triple ions in the case of K⁺, is a disadvantage at high concentration.     

The development and validation of a novel LC–MS/MS method for the quantification of cenicriviroc in human plasma and cerebrospinal fluid

A high-performance liquid chromatography tandem mass spectrometric method was developed and validated for cenicriviroc (CVC) quantification in human plasma and cerebrospinal fluid (CSF). The method involved precipitation with acetonitrile and injecting supernatants onto the column. Separation was achieved on an XBridge C₁₈ column with a gradient elution of 0.1% formic acid in water and acetonitrile. Analyte detection was conducted in positive ion mode using selected reaction monitoring. The m/z transitions were: CVC (697.3 → 574.3) and CVC-d7 (704.4 → 574.3). Calibration curve ranged from 5 to 1000 ng/mL for plasma and from 0.241 to 15.0 ng/mL for CSF. The intra- and inter-day precision and accuracy were <15% for both plasma and CSF across four different concentrations. CVC recovery from plasma and artificial CSF was >90%. The method was utilized for the measurement of patients’ plasma and CSF samples taking a dose of 50, 150 and 300 mg q.d.     

Highly selective and sensitive paper-based colorimetric sensor using thiosulfate catalytic etching of silver nanoplates for trace determination of copper ions

A novel, highly selective and sensitive paper-based colorimetric sensor for trace determination of copper (Cu²⁺) ions was developed. The measurement is based on the catalytic etching of silver nanoplates (AgNPls) by thiosulfate (S₂O₃²⁻). Upon the addition of Cu²⁺ to the ammonium buffer at pH 11, the absorption peak intensity of AuNPls/S₂O₃²⁻ at 522 nm decreased and the pinkish violet AuNPls became clear in color as visible to the naked eye. This assay provides highly sensitive and selective detection of Cu²⁺ over other metal ions (K⁺, Cr³⁺, Cd²⁺, Zn²⁺, As³⁺, Mn²⁺, Co²⁺, Pb²⁺, Al³⁺, Ni²⁺, Fe³⁺, Mg²⁺, Hg²⁺ and Bi³⁺). A paper-based colorimetric sensor was then developed for the simple and rapid determination of Cu²⁺ using the catalytic etching of AgNPls. Under optimized conditions, the modified AgNPls coated at the test zone of the devices immediately changes in color in the presence of Cu²⁺. The limit of detection (LOD) was found to be 1.0 ng mL⁻¹ by visual detection. For semi-quantitative measurement with image processing, the method detected Cu²⁺ in the range of 0.5–200 ng mL⁻¹(R² = 0.9974) with an LOD of 0.3 ng mL⁻¹. The proposed method was successfully applied to detect Cu²⁺ in the wide range of real samples including water, food, and blood. The results were in good agreement according to a paired t-test with results from inductively coupled plasma-optical emission spectrometry (ICP-OES).     

Synthesis and characterization of ferromagnetic Fe3C/C composite nanoparticles as a catalyst for carbon nanotube growth

Polystyrene template microspheres of narrow size distribution were prepared by dispersion polymerization of styrene in a mixture of ethanol and 2-methoxy ethanol. These template particles dispersed in aqueous solution have been used for the entrapment of ferrocene by a swelling process of methylene chloride emulsion droplets containing ferrocene within these particles, followed by evaporation of methylene chloride. The effects of CH₂Cl₂ volume and the [CH₂Cl₂]/[FeC₁₀H₁₀] (w/w) ratio on the size and size distribution of the swollen template particles were elucidated. Air-stable Fe₃C nanoparticles embedded in amorphous carbon matrix (Fe₃C/C) have been prepared by thermal decomposition of the ferrocene-swollen template polystyrene particles at 500 °C for 2 h in a sealed cell. Decomposition of these swollen template particles for 2 h at higher temperatures led to the formation of carbon nanotubes (CNTs) in addition to the Fe₃C/C composite nanoparticles. The yield of the CNTs increased as the annealing temperature was raised. An opposite behavior was observed for the diameter of the formed CNTs. The size and size distribution, crystallinity, and magnetic properties of the different Fe₃C/C composite nanoparticles have also been controlled by the annealing temperature.     

The iron phosphate K3Fe5(PO4)6

The crystal structure of tripotassium pentairon hexaphosphate has been determined by single‐crystal X‐ray diffraction. The structure contains one Fe atom on a center of symmetry, one K, two Fe and two P atoms on twofold axes, and one Fe, two P and one K atom in general positions. The K₃Fe₅(PO₄)₆ structure consists of a complex three‐dimensional framework of corner‐sharing between iron polyhedra, and corner‐ and edge‐sharing between PO₄ tetrahedra and iron polyhedra (FeO₅ and FeO₆). This linkage between iron and phosphorus forms intersecting channels containing the K atoms.