Direction of magnetization and domain wall mobility in (Dy,Y)Fe2

Magnetization measurements in the (Dy _x Y_1−x )Fe₂ intermetallic compounds show evidence of blocking of domain wall motion. This effect is a function of concentrationx. The direction of magnetization is also dependent on the Dy concentration. We have used the Mossbauer spectroscopy of⁵⁷Fe to verify the direction of magnetization in the series as a function ofx and temperature. The results show that this change in easy direction occurs at higher temperatures than those where the blocking is detected through DC magnetization measurements. supported by RHAE/SCT.     

Scaling impacted structures

Summary The problem of non-scalability of structures under impact loads caused by strain-rate effects is solved in this article by properly correcting the impact velocity. The technique relies on the use of an alternative dimensionless basis, together with a mathematical model which allows the calculation of a correction factor for the impact velocity. This new velocity, when applied to the model, makes it to assure the satisfaction of the scaling laws. The indirect similitude method detailed here is applied to two strain-rate sensitive structures, a double plate under in-plane impact and a beam subjected to a blast load. The results show a very good agreement so that the model and a prototype made from strain rate sensitive materials behave the same.accepted for publication 3 March 2004     

Application of the chemiluminescence systems to evaluate the role of Fcgamma and complement receptors in stimulating the oxidative burst in neutrophils

We have established a luminol- and a lucigenin-dependent CL methods to investigate the role of the receptors for Fc portion of IgG (FcgammaR) and/or complement receptors (CR) in mediating the oxidative burst in neutrophils from systemic lupus erythematosus (SLE) patients compared with healthy controls. In the luminol-CL system, all the reactive oxygen species (ROS) are responsible for light production, whereas in the lucigenin-CL system, only the first ROS generated, converts the lucigenin into an unstable intermediate molecule, which also emits light. First, neutrophils from healthy controls and SLE patients were stimulated with different IC opsonized or not with complement from normal human serum (NHS) or SLE serum, in presence of 10(-4) M luminol. This method was able to differentiate the role of the FcgammaR, CR and FcgammaR/CR co-operation in mediating the oxidative burst, as well as show that the oxidative burst mediated by these receptors was reduced in neutrophils from SLE patients. Second, neutrophils from healthy controls and SLE patients were stimulated with different IC, opsonized or not with NHS, in presence of 10(-3) M lucigenin. In this case, the lucigenin-CL system was also able to differentiate the role of FcgammaR and FcgammaR/CR co-operation, as well as show differences among healthy controls and two different groups of SLE patients according to their clinical manifestations. In conclusion, we have established two sensitive CL systems to study the role of FcgammaR and/or CR in stimulating the oxidative burst of neutrophils, which can be applied in monitoring the involvement of these receptors in the immunopathogenesis of SLE.     

Pulsed Nd:YAG laser welding of AISI 304 to AISI 420 stainless steels

The technique to weld AISI 304 stainless steel to AISI 420 stainless steel with a pulsed Nd:YAG laser has been investigated. The main objective of this study was to determine the influence of the laser beam position, with respect to the joint, on weld characteristics. Specimens were welded with the laser beam incident on the joint and moved 0.1 and 0.2 mm on either side of the joint. The joints were examined in an optical microscope for cracks, pores and to determine the weld geometry. The microstructure of the weld and the heat affected zones were observed in a scanning electron microscope. An energy dispersive spectrometer, coupled to the scanning electron microscope, was used to determine variations in (weight %) the main chemical elements across the fillet weld. Vickers microhardness testing and tensile testing were carried out to determine the mechanical properties of the weld. The results of the various tests and examinations enabled definition of the best position for the incident laser beam with respect to the joint, for welding together the two stainless steels.     

Ion synthesis and optical properties of gold nanoparticles in an Al2O3 matrix

Single-crystal Al₂O₃(0001) and Al₂O₃(1120) substrates are implanted by 160-keV Au⁺ ions with doses from 10¹⁵ to 10¹⁷ cm^?2. Some of the implanted samples are air-annealed at 800–1200°C. The properties of the synthesized composite layers are studied by Rutherford backscattering and linear optical reflection measurements, and their nonlinear optical characteristics are examined by RZ-scanning using a picosecond Nd: YAG laser operating at a wavelength of 1064 nm. The Rutherford backscattering spectra indicate that the implanted impurity concentrates near the surface of the Al₂O₃. The formation of gold nanoparticles in the Al₂O₃ can be judged from the characteristic optical plasmon resonance band in the reflectance spectra of the samples irradiated to a dose higher than 6.0 × 10¹⁶ cm^?2. The synthesized particles are shown to be responsible for nonlinear optical refraction in the samples. The nonlinear refractive index, n ₂, and the real part of the third-order susceptibility, Rex⁽³⁾, of the composite layers are determined.     

On concentration of solution to a Schrödinger logarithmic equation with deepening potential well

In this work, we prove the existence of positive solution for the following class of problems where λ>0 and is a potential satisfying some conditions. Using the variational method developed by Szulkin for functionals, which are the sum of a C¹ functional with a convex lower semicontinuous functional, we prove that for each large enough λ>0, there exists a positive solution for the problem, and that, as λ→+∞, such solutions converge to a positive solution of the limit problem defined on the domain Ω=int(V^?1({0})).     

Ultrastructure of the Alabama argillacea (Hübner) (Lepidoptera: Noctuidae) midgut

The insect midgut has ultimately been the focus of researches tempting to control insect pests because alterations in the insect gut may affect not only its development, but also physiological events such as nutrient absorption and transformation. The objective of the present work was to describe morphologically, histochemically, and ultrastructurally the larva midgut of Alabama argillacea (Hübner) (Lepidoptera: Noctuidae), a cotton key pest in Brazil. Light and electronic transmission microscopy was used to obtain images from midgut sections of late fourth-instar larvae of A. argillacea. In general, the morphology, histochemistry, and ultrastructure characteristics of A. argillacea midgut follow that described in the literature for other lepidopteran species. However, the results showed a mitochondrial polymorphism and branched microvilli, which suggest an ultrastrucutural and physiological modification possibly associated with a high absorption and secretion activity by the columnar cells of this species. This intense activity may favor a faster response related to the action of ingested microbial agents and/or toxins, and can explain the high susceptibility of A. argillacea to the agents of control such as the toxin of Bacillus thuringiensis.