Characterization of Co-evaporated Cu-Ag-In-Se Thin Films

In this study, annealing effect on the structural, electrical, and optical characteristics of the quaternary Cu-Ag-In-Se (CAIS) thin films was investigated. These samples were deposited by co-evaporation of the Cu, Ag, In₂Se₃, and Se sources at the substrate temperature of 300 °C. The structural properties of the thin films were analyzed by means of X-ray diffraction, and the results indicated that all of the films were in the polycrystalline structure with the preferred orientation along (112) direction. From the optical measurements, the band gap values were found to vary between 1.38 and 1.45 eV with annealing processes. The temperature-dependent electrical conductivity of the samples was measured in the temperature range of 90–400 K. The films gained degenerate behavior with increasing annealing temperature. The carrier conduction mechanism was determined at high- and low-temperature regions by comparing thermionic emission and hopping parameters. Photoconductivity of the as-grown film showed that there was an increase in conductivity with increasing illumination intensity. From this measurement, the variation of photocurrent as a function of illumination intensity was determined.     

WDS versus silicon drift detector EDS: a case report for the comparison of quantitative chemical analyses of natural silicate minerals

Electron probe microanalysis (EPMA) is an essential analytical approach to determine elemental concentrations of various solid specimens quantitatively in mineralogical, petrological and materials research. Either wavelength dispersive X-ray (WDS) or energy dispersive X-ray (EDS) spectrometric techniques can collect the characteristic X-rays generated from each element in the specimen by an incident electron beam in order to define chemical constituents. Although WDS has been the preferred technique because of its higher spectral resolution and ability to detect trace elements, new generation EDS systems with silicon drift detectors (SDD), equipped with thin windows and integrated digital processing electronics, are claimed to approach the WDS throughput. In this study, we compared the analytical capability of a SDD EDS system with respect to WDS equipped systems on natural silicate minerals. For this purpose, natural rock samples, in which the silicate minerals present had already been analysed by various WDS systems, were chosen to compare these results with the ones acquired with a SDD EDS system. SDD EDS yielded satisfactory results for major elements (Na, Mg, Al, Si, K, Ca, Ti, Mn and Fe) compared with the results of the same minerals obtained by various WDS systems.     

The effect of the diffusion time and pulse gradient duration ratio on the diffraction pattern and the structural information estimated from q-space diffusion MR: experiments and simulations

q-Space diffusion MRI (QSI) provides a means of obtaining microstructural information about porous materials and neuronal tissues from diffusion data. However, the accuracy of this structural information depends on experimental parameters used to collect the MR data. q-Space diffusion MR performed on clinical scanners is generally collected with relatively long diffusion gradient pulses, in which the gradient pulse duration, δ, is comparable to the diffusion time, Δ. In this study, we used phantoms, consisting of ensembles of microtubes, and mathematical models to assess the effect of the ratio of the diffusion time and the duration of the diffusion pulse gradient, i.e., Δ/δ, on the MR signal attenuation vs. q, and on the measured structural information extracted therefrom. We found that for Δ/δ  1, the diffraction pattern obtained from q-space MR data are shallower than when the short gradient pulse (SGP) approximation is satisfied. For long δ the estimated compartment size is, as expected, smaller than the real size. Interestingly, for Δ/δ  1 the diffraction peaks are shifted to even higher q-values, even when δ is kept constant, giving the impression that the restricted compartments are even smaller than they are. When phantoms composed of microtubes of different diameters are used, it is more difficult to estimate the diameter distribution in this regime. Excellent agreement is found between the experimental results and simulations that explicitly account for the use of long duration gradient pulses. Using such experimental data and this mathematical framework, one can estimate the true compartment dimensions when long and finite gradient pulses are used even when Δ/δ  1.     

Deposition and characterization of layer-by-layer sputtered AgGaSe2 thin films

Sputtering technique has been used for the deposition of AgGaSe₂ thin films onto soda-lime glass substrates using sequential layer-by-layer deposition of GaSe and Ag thin films. The analysis of energy dispersive analysis of X-ray (EDXA) indicated a Ga-rich composition for as-grown samples and there was a pronounce effect of post-annealing on chemical composition of AgGaSe₂ thin film. X-ray diffraction (XRD) measurements revealed that Ag metallic phase exists in the amorphous AgGaSe₂ structure up to annealing temperature 450 °C and then the structure turned to the single phase AgGaSe₂ with the preferred orientation along (1 1 2) direction with the annealing temperature at 600 °C. The surface morphology of the samples was analyzed by scanning electron microscopy (SEM) measurements. The structural parameters related to chalcopyrite compounds have been calculated. Optical properties of AgGaSe₂ thin films were studied by carrying out transmittance and reflectance measurements in the wavelength range of 325-1100 nm at room temperature. The absorption coefficient and the band gap values for as-grown and annealed samples were evaluated as 1.55 and 1.77 eV, respectively. The crystal-field and spin-orbit splitting levels were resolved. These levels (2.03 and 2.30 eV) were also detected from the photoresponse measurements almost at the same energy values. As a result of the temperature dependent resistivity and mobility measurements in the temperature range of 100-430 K, it was found that the decrease in mobility and the increase in carrier concentration following to the increasing annealing temperature attributed to the structural defects (tetragonal distortion, vacancies and interstitials).     

Interactive Compromise Programming

The purpose of this paper is to introduce a solution method for multiple objective linear programming (MOLP) problems. The method, called interactive compromise programming (ICP), offers a practical solution to MOLP problems by combining judgement with an automatic optimization technique in decision-making. This is realised by using the method of compromise programming and the method of a two-person zero-sum game in an iterative way. The method is illustrated by a numerical example.     

MR diffusion - "diffraction" phenomenon in multi-pulse-field-gradient experiments

Using pulsed-field-gradient (PFG) experiments, the sizes of the pores in ordered porous media can be estimated from the "diffraction" pattern that the signal attenuation curves exhibit. A different diffraction pattern is observed when the experiment is extended to a larger number (N) of diffusion gradient pulse pairs. Simulations to calculate signal values from arbitrary gradient waveforms are performed for diffusion in restricted geometries using a matrix operator formalism. The simulations suggest that the differences in the characteristics of the attenuation curves are expected to make it possible to measure smaller pore sizes, to improve the accuracy of pore size measurements and potentially to distinguish different pore shapes using the N-PFG technique. Moreover, when an even number of PFG pairs is used, it is possible to observe the diffraction pattern at shorter diffusion times and measure an approximation to the average pore size even when the sample contains pores with a broad distribution of sizes.     

On Semi-Slant $${\varvec{\xi ^\perp }}$$-Riemannian Submersions

The aim of the present paper is to define and study semi-slant \(\xi ^\perp \)-Riemannian submersions from Sasakian manifolds onto Riemannian manifolds as a generalization of anti-invariant \(\xi ^\perp \)-Riemannian submersions, semi-invariant \(\xi ^\perp \)-Riemannian submersions and slant Riemannian submersions. We obtain characterizations, investigate the geometry of foliations which arise from the definition of this new submersion. After we investigate the geometry of foliations, we obtain necessary and sufficient condition for base manifold to be a locally product manifold and proving new conditions to be totally umbilical and totally geodesicness, respectively. Moreover, some examples of such submersions are mentioned.     

Transient thermal response of phase change material embedded with graphene nanoplatelets in an energy storage unit

This research was focused on the preparation of mixed metal oxide pigments doped with terbium ions with the general formula of Sn_0.752Co_0.08P_0.16Tb_0.008O₂. These pigments were synthesised by solid-state reactions at high calcination temperatures. The temperature range was chosen from 1350 to 1500 °C. The goal was to develop conditions for the synthesis of this type of pigments and to determine the influence of terbium ions on the colour properties of these compounds. All prepared pigments were applied into the organic matrix and into the ceramic glaze. Thermal behaviours of the reaction mixtures were investigated using differential thermal and thermogravimetric analysis. Synthesised Sn_0.752Co_0.08P_0.16Tb_0.008O₂ pigments were compared with concurrently prepared pigment Sn_0.760Co_0.08P_0.16O₂ depending on the calcination temperature with respect to the colour properties in CIE L*a*b* colour space, furthermore from the point of particle size distribution and phase composition. All compounds provided blue–violet hues that are stable in ceramic glazes.     

Metabolomics and Physiological Insights into the Ability of Exogenously Applied Chlorogenic Acid and Hesperidin to Modulate Salt Stress in Lettuce Distinctively

Recent studies in the agronomic field indicate that the exogenous application of polyphenols can provide tolerance against various stresses in plants. However, the molecular processes underlying stress mitigation remain unclear, and little is known about the impact of exogenously applied phenolics, especially in combination with salinity. In this work, the impacts of exogenously applied chlorogenic acid (CA), hesperidin (HES), and their combination (HES + CA) have been investigated in lettuce (Lactuca sativa L.) through untargeted metabolomics to evaluate mitigation effects against salinity. Growth parameters, physiological measurements, leaf relative water content, and osmotic potential as well as gas exchange parameters were also measured. As expected, salinity produced a significant decline in the physiological and biochemical parameters of lettuce. However, the treatments with exogenous phenolics, particularly HES and HES + CA, allowed lettuce to cope with salt stress condition. Interestingly, the treatments triggered a broad metabolic reprogramming that involved secondary metabolism and small molecules such as electron carriers, enzyme cofactors, and vitamins. Under salinity conditions, CA and HES + CA distinctively elicited secondary metabolism, nitrogen-containing compounds, osmoprotectants, and polyamines.     

DFT, FT-Raman and FT-IR investigations of 5-methoxysalicylic acid

FT-IR and FT-Raman spectra of 5-methoxysalicylic acid (5MeOSA) have been experimentally reported in the region of 4000–10 cm⁻¹ and 4000–50 cm⁻¹, respectively. The optimized geometric parameters, conformational equilibria, normal mode frequencies and corresponding vibrational assignments of 5MeOSA (C₈H₈O₄) are theoretically examined by means of B3LYP hybrid density functional theory (DFT) method together with 6-31++G(d,p) basis set. Furthermore, reliable vibrational assignments have made on the basis of potential energy distribution (PED) calculated and the thermodynamics functions, highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of 5MeOSA have been predicted. Calculations are employed for different conformations of 5MeOSA, both in gas phase and in solution. Solvent effects are investigated using chloroform and dimethylsulfoxide. All results indicate that B3LYP method is able to provide satisfactory results for predicting vibrational frequencies and the structural parameters, vibrational frequencies and assignments, IR and Raman intensities of 5MeOSA are solvent dependent.