REE AND Sr, Nd, Pb ISOTOPIC GEOCHEMISTRY OF HUANGYISHAN BASALT, KUANDIAN, LIAONING, NORTHEAST CHINA

In the light of major element geochemistry, mineral chemistry and REE and isotopic data, the small but apparent isotopic differences between the Cenozoic volcanic rocks east and west of the Tancheng-Lujiang fault are believed to be caused by the mixing and metasomatism of crustal and mantle material in tho mantle source region in response to Pacific plate subduction. The presence of phlogopite and pargasite in mantle xenoliths lends strong support to mantle metasomatism.     

Synthesis and properties of the copper(Ⅱ) complexes with stable radical

Four novel copper(Ⅱ) complexes have been synthesized,namely Cu(hfac)2NITPhNO2 (1),Cu(hfac)2NITPhCH3 (2),Cu(pfpr)2NITPhNO2,(3) and Cu(Pfpr)2NITPhCH3 (4),where hfac= hexafluoro-acetylacetonate,pfpr=pentafluoropropionate,NITR.=2-R-4,4,5,5-tetraniethyl-4,5-dihydro-1H-imidazolyl-1-oxyl-3-oxide.(R=4-nitrophenyl,4-methylphenyl).These complexes were rharicter-ized by elemental analyses,IR,electronic spectra and molar conductance.The temperature-dependent magnetic susceptibility of complexes 1 and 3 have been studied in the 4 300 K range,giving I he exchange integral J=10.56 cm-1 for complex 1 and J =-30.9 cm-1 for complex 3.     

不同拉压弹性模量壳体有限元法

1.计算假定不同拉压弹性模量的弹性理论在壳体有限元计算中应用的假定: (1)单元的内力、应力及应变状态用单元形心处的内力、应力及应变状态来代替,其精度随网格加密而提高。(2)沿壳厚将单元分层,假定单元内同一层为同一类区域。(3)根据各层区域类型的不同引入不同的弹性模量E~+、E~-和泊松比v~+、v~-,以E_1、v_1表示薄壳物理方程中的E、v。薄壳上各点为二维应力状态,σ_α、σ_β为主应力,则E_1、v_1按如下方法确定:     

三氧化二铝短纤维对ZA22合金干摩擦磨损性能的影响

针对无油润滑场合的实际需要，采用挤压铸造法制取了Ａｌ２Ｏ３短纤维强化ＺＡ２２合金复合材料，并对其在干摩擦条件下的摩擦磨损性能进行了试验研究，同时还用扫描电子显微镜对试样磨损表面形貌进行了观察，进而对材料的磨损机理作了分析与讨论。结果表明，随着Ａｌ２Ｏ３短纤维含量的增大，ＺＡ２２／Ａｌ２Ｏ３复合材料的耐磨性能提高，但摩擦性能降低；当纤维取向垂直于摩擦而时，复合材料的摩擦磨损性能比纤维平行于摩擦面取向     

非线性规划的一个全局收敛的一般算法模式及应用

非线性规划的一个全局收敛的一般算法模式及应用赵云彬，李俭（中国科学院应用数学研究所，北京１０００８０）（重庆大学数学系，重庆６３００４４）考虑约束问题中Ｊ：＊”－－＋Ｒ；ｈ：Ｈ”、＊ｍ且０＜。＜＋．Ｘ分别为如下三种约束：（１）ｘ一＊”Ｚ（１１）ｘ一｛...     

OPTICAL PROPERTIES OF δ-DOPED GaAs AND GaAs/Al0.1Ga0.9As SUPERLATTICES

Radiative transition in δ-doped GaAs superlattices with and without Al_0.1Ga_0.9As barriers is investigated by using photoluminescence at low temperatures. The experimental results show that the transition mechanism of δ-doped superlattices is very different from that of ordinary superlattices. Emission intensity of the transition from the electron first excited state to hole states is obviously stronger than that from the electron ground state to hole states due to larger overlap integral between wavefunctions of electrons in the first excited state and hole states. Based on the effective mass theory we have calculated the self-consistent potentials, optical transition matrix elements and photoluminescence spectra for two different samples. By using this model we can explain the main optical characteristics measured. Moreover, after taking into account the bandgap renormalization energy, good agreement between experiment and theory is obtained.     

铈对ZA22／Al2O3复合材料机械性能的影响

采用挤压铸造法制备ＺＡ２２／Ａｌ２Ｏ３复合材料，研究了铈对复合材料的极限抗拉强度，冲击韧性及硬度的影响。结果表明，随纤维体积分数增大，复合材料的硬度均提高，冲击韧性降低；由于铈的变质作用。复合材料室温σｂ提高，硬度提高，但高温σｂ和冲击韧性降低；预块的过滤作用使用铈量对复合材料机械性能基本无影响。     

基于FPGA的PLC并行执行定时器/计数器的设计

针对ARM+FPGA构建的PLC系统,分析PLC对定时器/计数器的功能需求,设计了可以并行执行的定时器/计数器,构建的定时器/计数器共用一个端口读写控制器与FPGA中央控制器进行数据通信,定时器/计数器内部工作是相互独立的,能够并行的工作,并通过使用地址映射存储器使得定时器/计数器的指令执行更加高效。对中央控制器与定时器/计数器的通信时序和通信格式进行了设计,方便了中央控制器对定时器/计数器的控制与测试。通过仿真测试,该定时器/计数器能够满足PLC定时器/计数器的基本功能,并且达到了稳定的定时/计数的设计要求。     

PLC梯形图转化为多操作数逻辑指令的设计与实现

针对每一个操作数有一个操作码的PLC逻辑指令,设计了一个操作码可带多个操作数,操作数附加“辅助符号位”的新型PLC逻辑指令,避免在执行逻辑指令过程中有多少个操作数需要译码多少次的状况。研究这种新指令语句的数据结构和梯形图的数据结构,应用这两种数据结构研究梯形图转化成新指令表的转化算法。对梯形图采用按梯级顺序递归扫描方法构造二叉树结构,然后对二叉树进行后序遍历得到一个中间结果指令表,对中间结果指令表经过逻辑关系的分析与同类型逻辑关系操作数的合并处理得到最终的指令表。通过对串并联结构梯形图的转换测试,其新指令语句的转化结果正确。