Quantification of trace elements in human serum fractions by liquid chromatography and inductively coupled plasma mass spectrometry

On‐line coupling of LC and ICP‐MS has been used for fractionation and detection of species of Cu, Fe, I, Se and Zn in human serum. It has been shown that anion exchange chromatography provided better separation capability (both intra‐ and inter‐element) than size‐exclusion chromatography. The mobile phases for ion exchange chromatography consisted of Tris–HNO₃ buffer and ammonium salt (nitrate, acetate or formate). Formate was found to be the best mobile phase counter ion, enabling good chromatographic separation, and is acceptable for mass spectrometry too. The quantitative evaluation of element concentrations adhering to individual fractions was performed by the peak area normalization method. The repeatability of results ranged from 3 to 15% (depending on the element concentration level) and represented the main part of the result uncertainty. The accuracy of Cu and Zn fraction determinations was confirmed by comparison with the isotope dilution technique. Copyright © 2006 John Wiley & Sons, Ltd.     

Material tensor parameters of LiNbO3 relevant for electro- and elasto-optics

The complete set of self-consistent parameters of nominally undoped LiNbO₃ crystals of congruent composition that describe the electro-optic, piezoelectric, elasto-optic, elastic, and dielectric response has been determined by numerically evaluating available measurements. The parameters were determined at room temperature and consist of the low-frequency clamped dielectric constants ε^S _ij, elastic stiffness constants at constant electric field C^E _ijkl, piezoelectric stress coefficients e_ijk, elasto-optic constants at constant electric field p^E _ijkl, and clamped electro-optic coefficients r^S _ijk. It is shown that the complete set is required for calculating the effective electro-optic coefficients and dielectric constants in photorefractive applications of LiNbO₃. Received: 4 January 2002 / Revised version: 1 February 2002 / Published online: 14 March 2002     

Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).

     

IAEA quality control studies on determining trace elements in bioindicators

Twenty laboratories from 17 countries around the world participated in two analytical quality control exercises, coded NAT-5 and NAT-6, on determining trace and minor elements in plant bioindicator samples. 1398 laboratory mean values for 51 elements were submitted for two lichen and two moss materials. The submitted measurement results were evaluated as interlaboratory comparison (IC) exercises and as proficiency tests (PT) following standard procedures developed by the International Atomic Energy Agency (IAEA). The evaluations confirmed good performance of the participating laboratories for many elements. Furthermore, the laboratories performance based on IC criteria improved from the first exercise to the second one. Subsequent NAT-5 evaluation revealed systematic differences between the analytical values obtained non-destructively or after the total sample dissolution and the measurements following nitric acid sample dissolution (without the use of hydrofluoric acid) for some elements. The most critical elements for this kind of discrepancies appeared to be Al, Ca, Cr, Fe, Na, Ni, and Pb. After changing analytical methodologies in the concerned laboratories, more consistent values for those elements were obtained in NAT-6. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal decomposition of N2H6GeF6 · H2O,isolation and characterization of intermediates

The thermal behaviour of N₂H₆GeF₆ · H₂O was investigated by TG, DTG and DTA measurements. The decomposition proceeded in three steps, in which anhydrous N₂H₆GeF₆ and N₂H₅GeF₅; were isolated and characterized by chemical analysis and vibrational spectroscopy. The X-ray powder photographs of the intermediates were indexed, namely, for N₂H₆GeF₆ on the basis of a monoclinic cell with a = 8.86(9), b = 9.29(2), c =7.40(0) Å, β = 85° and for N₂H₅GeF₅ on the basis of an ortrhorhombic cell with a = 8.43(5),b = 9.19(9), c = 7.43(6) Å.     

Delphinidin–Aluminum(III) Complexes in Aqueous and Non-Aqueous Media: Spectroscopic Characterization and Theoretical Study

Summary. The study of delphinidin complexation with trivalent aluminum in acidic aqueous buffered (pH 3.0 and 3.8) and methanolic solutions was performed utilizing electronic absorption spectroscopy and quantum chemical calculations. In its structure delphinidin possesses several chelating sites in competition towards aluminum(III). Molar ratio plots denoted the formation of only one aluminum(III):delphinidin complex of stoichiometry of 1:1 in both investigated media. Semiempirical calculations, performed at the restricted HF AM1 level, enabled the determination of the structural features of free delphinidin and structural modifications caused by chelation of aluminum(III). Considering the pigment molecular structure and the results of the theoretical calculations it is possible to equally implicate C3′–C4′ and C4′–C5′ hydroxyl groups as those with the predominant chelating power.     

Polarographische Bestimmung des Pyridoxols in pharmazeutischen Präparaten

Zusammenfassung Es wird eine neue polarographische Methode zur direkten Bestimmung des Pyridoxols in Injektionspräparaten und Tabletten beschrieben. Die ausgearbeitete Methode beruht auf der polarographischen Reduktion des Pyridoxolmoleküls im Milieu von Ammoniak-Ammoniumchlorid-Puffern und weiter auf der Bildung einer katalytischen Stufe des Pyridoxols in Veronalpuffern. Die polarographische Methode ist rascher und in manchen Fällen genauer und empfindlicher als die bisher in Gebrauch stehenden Methoden. Die Anwesenheit der in den Präparaten laufend vorkommenden Begleitstoffe des Pyridoxols stört nicht die polarographische Bestimmung. Die Methode kann auch zur Bestimmung des 3-Hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridins benutzt werden, das ein Zwischenprodukt bei der Pyridoxolerzeugung ist.

---

Summary A new polarographic method is described for the direct determination of pyridoxol in injection preparations and tablets. This method is based on the polarographic reduction of the pyridoxol in ammonia-ammonium chloride buffer medium and also on the formation of a catalytic stage of the pyridoxol in veronal buffers. The polarographic method is faster and in many cases more accurate and more sensitive than the methods now in use. The presence of the materials which always accompany the pyridoxol in the preparations does not interfere with the polarographic determination. The method can likewise be used for determining 3-hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridine, which is an intermediate product in the manufacture of pyridoxol.

---

Résumé On décrit une nouvelle méthode polarographique pour le dosage direct du pyridoxol dans les préparations pour injections et dans les comprimés. La méthode élaborée repose sur la réduction polarographique de la molécule de pyridoxol dans le milieu tampon ammoniaque-chlorure d'ammonium, et, en outre, sur la formation d'une phase catalytique du pyridoxol dans les tampons au véronal. La méthode polarographique est plus rapide et dans de nombreux cas plus exacte et plus sensible que les méthodes utilisées jusqu'ici. La présence d'impuretés existant couramment dans les préparations à côté du pyridoxol ne gêne pas le dosage polarographique. On peut aussi utiliser la méthode pour le dosage de l'hydroxy-3 méthoxyméthyl-4 oxyméthyl-5 méthyl-2 pyridine, substance intermédiaire dans la préparation du pyridoxol.

---

---

Herrn Dr.P. Zuman danken wit für Ratsehläge bei der Abfassung dieser Arbeit.     

Individual extraction constants of some dicarbollylcobaltate anions in the water-nitrobenzene system

Individual extraction constants of nine dicarbollylcobaltate anions in the two-phase water-nitrobenzene system were determined radiometrically assuming that the changes of Gibbs energy of the transfer of the tetraphenylarsonium cation, Ph₄As⁺, and of the tetraphenylborate anion, BPh ₄ ^– , from the aqueous into the nitrobenzene phase are equal. The constants obtained by this method were correlated with Hansch's constants of hydrophobity.